Laserfiche WebLink
--- <br /> �. � <br /> LIMITATIONS AND CONDITIONS OF USE <br /> This product evaluation report contains or makes reference to specifications,technical details and instaflation <br /> details and/or methods that pertain to the proper use and/or installation of the product specified herein. <br /> Specific limitations and conditions of its use including but not limited to the following are contained in Reference <br /> 1 and are the subject of Product Approval in accordance with the State of Florida Product Approval Rule 9N-3. <br /> • Design Pressure Rating(psf) � Installation restrictions. <br /> • Installation substrate requirements. • Product description. <br /> • Installation anchor requirements. • Product components. <br /> QUALITY ASSURANCE <br /> This product is manufactured under a quality assurance program audited by an approved Certification and <br /> Quality Assurance Entity National Accreditation & Management Institute (NAM1) as required in Rule 9N- <br /> 3.005(3). See FBC Organization No. CER1773 and QUA1789 for approval under Rule 9N-3. <br /> APPLICATIONS/INSTALLATIONS OUTSIDE THE LIMITATIONS AND <br /> CONDITIONS OF USE <br /> Rule 9N-3.005(1)(e) states "Rational engineering analysis cannot be used in lieu of a standard test required by <br /> the Code for approval of products within the scope of the standard, except that project specific approval by the <br /> local authorities having jurisdiction in accordance with alternate methods and materials authorized in the Code." <br /> Any modification to this product as evaluated in this report and approved by the Florida Building Commission is <br /> outside the scope of this evaluation and will be the responsibility of others. As allowed in Rule 9N-3.005(1)(e), a <br /> project specific approval by the local authorities having jurisdiction may be used given an appropriate rational <br /> analysis is conducted and deemed acceptable to the local authorities having jurisdiction. <br /> PERFORMANCE AND TESTING STANDARDS <br /> Reference 2 conducted testing to the following standard(s). <br /> 1. TAS201-94, Impact Test Procedures. <br /> 2. TAS202-94,Criteria for Testing Impact& Non-Impact Resistant Building Envelope Components Using <br /> Uniform Static Air Pressure. <br /> 3. TAS203-94,Criteria for Testing Products Subjected to Cyclic Wind Pressure Loading. <br /> 4. ASTM F588-97&04, Standard Test Methods for Measuring the Forced Entry Resistance of Window <br /> Assemblies, Excluding Glazing Impact(in accordance with Sections 2411.3.2.1& R4410.2.3.2.1 for Forced <br /> Entry Testing per AAMA/WDMA/CSA 101/I.S.2/A440) <br /> PTC Product Design Group,LLC Project No.411-1203 Robert J.Amoruso,P.E. <br /> P.O.Box 520775—Longwood,Florida 37252 Product Evaluation Report FL No 49752 <br /> Phone:321-690-1788 Fax:321-690-1789 No.2039 Page 3 of 4 <br /> FBPE Certification of Authorizatio�No.25935 <br />