|
Layers: The CPU's chassis accepts four layers of equipment, directly to the CPU2-64D/-640E. On nen�vork systems (two or
<br /> including the control panel.The CPU2-640 fills three positions more networked fire panel nodes),one network display(either
<br /> (left to right)in the first-installed layer(the back of the chassis), NCA-2 or NCS/ONYXWorks) is required for every system. On
<br /> its integral power supply occupies the center two positions in network systems, the NCA-2 connects to (and requires) a
<br /> the next two layers;the optional display occupies(the left)two standard Network Control Module or High-Speed Network
<br /> positions at the front, flush with the door Some equipment, Control Module. Mounts in a row of FACP node or in two
<br /> such as the NCA-2, may be mounted in the dress panel annunciator positions. Mounting options include the DP-
<br /> directly in front of the control panel. The NCA-2 can be used DlSP2, ADP-4B, or in an annunciator box, such as the ABS-
<br /> as a primary dispiay for the NFS2-640 {use NCA/640-2-Ki� 2D. In CAB-4 top-row appiications,a DP-DISP2 and two BMP-
<br /> by directly connecting their network ports (required in Cana- 1 blank modules are required for mounting. Required for
<br /> dian stand-alone applications); see NCA-2 data sheet for NFS2-640 applications employing the DVC-EM with DAL
<br /> mounting options (DN-7047) devices. See DN-7047
<br /> Expansion: Installing an LEM-320 Loop Expander Module CPU2-640:Central processing unit with integral 3 0 A(6.0 A in
<br /> adds a second SLC loop to the control panel.The LEM-320 is alarm) power supply for an NFS2-640 system. Incfudes CPU
<br /> mounted onto the CPU2-640,occupying the middle-right, sec- factory-mounted on a chassis; one Signaling Line Circuit
<br /> ond(back)sfot on the chassis. expandable to two; installation, programming and operating
<br /> Networking: If networking two or more control panels, each manuals. Order one per system or as necessary (up to iO3
<br /> unit requires a Network Control Modufe or High-Speed Net- network nodes on a neiwork s stem.
<br /> work Control Module. (HS-NCM can support two nodes; see CPU2-640E:Same as CPU2-640 but requires 240 VAC, 1.5 A,
<br /> "Networking Options" on page 4). These modules can be (3.0 A in alarm)
<br /> installed in any option board position (see manuai), and addi- NCA/640-2-KIT: Bracket instaiiation kit required to mount
<br /> tional option boards can be mounted in front of the network NCA-2 to the CPU2-640/-640E's standard chassis.
<br /> control modules.
<br /> DP-DISP2: Dress panel for top row in cabinet with CPU2-640/
<br /> KDM-R2 Controls and Indicators �OE installed.
<br /> Program Keypad: QWERTY type (keyboard layout, see ADP2-640: Dress panel for middle rows with CPU2-640/640E.
<br /> figureJ BMP-1:Blank module tor unused module positions.
<br /> 12 LED indicators: Power; Fire Alarm, Pre-Alarm, Security; BP2-4: Battery plate, required.
<br /> Supervisory; System Trouble, Signals Silenced; Points Dis- LEM-320: Loop Expander Module. Expands each NFS2-640
<br /> abled;Control Active;Abort; Pre-Discharge; Discharge. to two Signaling Line Circuits. See DN-6881.
<br /> Keypad Switch Controls:Acknowledge/Scroll Display;Signal NETWORKING OPTlONS
<br /> Silence, Drill; System Reset; Lamp Test.
<br /> LCD Display: 80 characters (2 x 40) with long-life LED NCM-W, NCM-F: Standard Network Communications Mod-
<br /> backlight. ules. Wire and multi-mode fiber versions available. See DN-
<br /> sssr
<br /> Product tine Information HS-NCM-W/MF/SF/WMF/WSF/MFSF: High-speed network
<br /> communications modules that can connect to two nodes.Wire,
<br /> • "Configuration Guidelines"on page 4 single-mode fiber, multi-mode fiber, and media conversion
<br /> • "Nelworking Options"on page 4 models are available. See DN-60454
<br /> • "Auxiliary Power Suppiies and Batteries"on page 4 RPT-W, RPT F, RPT WF: Standard-network repeater board
<br /> • "Audio Options"on page 5 with wire connection (RPT-W), fiber connection (RPT-F), or
<br /> • "Compatible Devices, EIA-232 Ports"on page 5 a�lowing a change in media type between wire and fiber(RPT-
<br /> WF). Not used with high-speed networks. See DN-6977
<br /> • "Compatible Devices, EIA-485 Ports"on page 5
<br /> ONYXWorks: UL-listed graphics PC workstation, software,
<br /> • "Compatible Intelligent Devices"on page 6 and computer hardware. See DN-7048 for specific part num-
<br /> • "Enclosures,Chassis,and Dress Plates"on page 6 bers.
<br /> • "Other Options"on page 7 NFN-GW-EM,NFN-GW-EM-3: NFN Gateway,embedded. See
<br /> CONFIGURATION GUIDEUNES DN-60499
<br /> Siand-alone and network systems require a main drsplay On AUXILIARY POWER SUPPLIES AND BA7TERIES
<br /> single-CPU systems (one CPU2-640%640E), display opiions ACPS-610:6 0 A or 10 A addressable charging power supply.
<br /> are fhe KDM-R2 or the NCA-2. On nerivork systems (two or See DN-60244
<br /> more neiworked fire panel nodes), ai least one NCA-2, NCS,
<br /> or ONYXWorks annunciation device is required. Other optiorts APS2-6R:Auxiliary Power Suppiy Provides up to 6 0 amperes
<br /> lrstedas follows; of power for peripherai devices. Includes battery input and
<br /> transfer relay, and overcurrent protection. Mounts on two of
<br /> KDM-R2:80-character backiit LCD display with QWERTY pro- four positions on a CHS-4L or CHS-4 chassis. See DN-5952.
<br /> gramming and control keypad. Order two BMP-1 blank mod-
<br /> ules and DP-DISP2 mounting plate separately. Requires top FCPS-24S6/S8: Remote 6 A and 8 A power suppfies with bat-
<br /> row of a cabinef. Required for each sfand-alone 80-character tery charger See DN-6927
<br /> display system. The KDM-R2 may mount in network nodes fo BAT Series: Batteries. NFS2-640 uses two 12 voit, 18 to 200
<br /> dispfay`7oca/"node rnformafion as long as at leasi one NCA-2 AH batteries. See DN-6933.
<br /> or NCS/ONYXWorks network drsptay rs on the system to drs-
<br /> play nerivork information.
<br /> NCA-2: Network Control Annunciator, 640 characters. On sin-
<br /> gle CPU2-640%640E systems, the optional NCA-2 can be
<br /> used as the Primary Disptay for the panel and connects
<br /> Page 4 of 8—DN-7111•G•OB/09l2012
<br />
|