Laserfiche WebLink
TRINIIY ERD <br /> 4.8 Wite Brite� Elastomeric Coating is a white elastomeric acrylic-based roof coating. <br /> 4.8.1 Specification: ASTM D6083 <br /> 4.8.2 Substrates: Galvanized steel, structural concrete, smooth-surfaced BUR, smooth- <br /> surFaced APP modified bitumen or granule-surfaced SBS modified <br /> bitumen <br /> 4.8.3 Surface Prep: Repair all surface cracks using Wite Brite� Cement, as applicable, in <br /> accordance with SR Products' published requirements. <br /> 4.8.4 Priming: Prime surfaces using Wite Brite� AS Primer, as applicable, in accordance <br /> with SR Produds'published requirements. <br /> 4.8.5 Application Rate: Smooth Surface• <br /> Base Coat: 1.5 to 2.0 gai/square; Finish Coat: 1.5 to 2.0 gal/square <br /> Mineral Surface: <br /> Base Coat: 2.0 to 3.0 gal/square; Finish Coat: 2.0 to 3.0 gal/square <br /> 4.8.6 Container Size: 5 gallon unit <br /> 4.8.7 Approved Use: Acceptable for use atop any roof system approval or fire rating directory <br /> listing (substrates noted above) that refers to Wite Brite� Elastomeric <br /> Coating or ASTM D6083 coating. <br /> $. LIMITATIONS: <br /> 5.1 This Evaluation Report is not for use in HVHZ. <br /> 5.2 Fire classification is not part of this Evaluation Report. Refer to a current Roofing Materiais <br /> directory for fire classifications of roof assemblies using the components outlined herein. <br /> 5.3 SR Products Cements, Adhesives and Coatings are components for use in Approved roof <br /> assemblies. Refer to the "Approved Use" in Section 4 for each component. The Cements, <br /> Adhesives and Coatings noted herein are not purported to be Roofing Systems, and their use <br /> shall be governed by and limited to applications where Roof System Product Approval is not <br /> necessary (e.g., maintenance and repair) or where the components are called out in a Roof <br /> System Produd Approval. <br /> 5.4 All products listed herein shall have quality assurance audit in accordance with F.A.C. Rule 9N- <br /> 3 requirements. <br /> 6. INSTALU4TION: <br /> 6.1 SR Products Cements, Adhesives and Coatings shall be installed in accordance with SR <br /> Products' published installation instrudions, subject to the Limitations in Section 5 and the <br /> Application Rate/Approved Use noted in Section 4. <br /> E�cterior Research and Design, LLC. Evaluation Report S35730.01.11-Ri <br /> CertMcatie of Authorfzatlon�Ie9503 FL14381-Ri <br /> Revision 1: 12/06/2011 <br /> Page 5 of 6 <br />