13-14246 - Laserfiche WebLink

Browse Search

' SpectrAlert Advance Specifications SpectrAlert Advance horns,strobes,and horn sirobes shall mount to a standard 4 x 4 x 1'/z-inch back box,4-inch ortagon back box,or doubie-gang back box.Two-wire products shal!also mount to a single-gang 2 x 4 x 17B-i�ch back box.A universai mounting plate shali be used for mounting ceiling and wall products.The notification appliance circuit wiring shaii terminate at the universai mounting plate. Aiso SpectrAlert Advance products,when used with the Sync•Circuit'"Module accessory,shall be powered from a non-coded notification appiiance circwt output and shail operate on a nominal 12 or 24 volts When used with the Sync•Circuit Module, 12-volt-rated notification appliance circwt outputs shall operate between 8 and 17.5 volts;24-voit-rated notification appiiance circuit outputs shali operate between 16 and 33 volts.Indoor SpectrAlert Advance products shall operate between 32 and 120 degrees Fahrenheit from a regulated DC or fuil-wave rectified unfdtered power suppiy Strobes and hom sirobes shall have fieid-selectabie candela settings including 15, 15/75.30,75,95, 110, 115 135 150, 177,and 185 The sirobe shall be a System Sensor SpectrAlert Advance Modei listed to UL 1971 and shali be approved for fire protective service. i he strobe shali be wired as a pnmary-signaling notrficaUon apoliance and comply with the Americans with Oisab+htie;s Act requirements for visible signaling app�iances,fiashing at 1 Hz over the strobe's entire operaUng voltage range.The strobe light shali consist of a xenon flash tube and assocfated lens/refiector system. The horn strobe shall be a System Sensor SpectrAlert Advance Model listed to Ut 1971 and UL 464 and shali be approved for fire protective service.The horn strobe shail be w+red as a primary-signaling notificaUon appliance and comply with the Americans with Disabibties Act requirements for visibie signaling appliances,flashing at 1 Hz over the strobe's entire operating voltage range.The strobe light shall consist of a xenon flash tube and assaciated lens(reflector system.The hom shall have three audibility opUons and an option to swdch between a temporal three pattern and a non-temporal(continuous)pattern.These options are set by a multiple position switch.On four-wire products,the sbobe shali be powered independently of the sounder The horn on hom strobe models shall operate on a coded or non-coded power supply The module shaii be a System Sensor Sync•Circuit model MDL listed to UL 464 and shall be approved for fire protective service.The module shall synchronize SpectrAlert strobes at 1 Hz and horns at temporal three.Also,while operating the strobes,the module shall silence the horns on horn strobe modeis over a s�ngie pair of wires.The module shall mount to a 411/16 x 411/16 x 21B-inch back bo� The module shail also control two Style Y(class B)circuits or one Style Z(ciass A;circuit The module shall synchronize multiple zones.Daisy chaining two or more synchronization modules together wilt synchronize ail ihe zones they control.The module shall not operate on a coded power supply. 32°F to 120°F(0°C to 49°C) 10 to 93%non-condensing 1 flash per second Regulated 12 DC/FWR or regulated 24 DC/=WR 8 to 17.5 V(12 V nominal)or 16 to 33 V(24 V nominal) 12to 7$AWG 5.6""Lx47"'Wx2.5 D(142mmLx119mmWx64mmD) 56""Lx47"Wxi.3""D(142mmLx119mmWx33mmD) 5.9°Lx5.0""Wx2.2 D(151mmLx128mmWx56mmD) 5.7"Lx4.8 Wx0.35"C(145mmLx122mmWx9mmD) i Fuil Wave Recirfied(FWR)voltage is a non-regulated,time-varying power source that is used on some power supply and panel outputs. 2 P S,PC,and SC products will operate at 12 V nominat only for 15 and 15/75 cd. „�os.,r�c�,,