|
APPROVED ASSEMBLlES
<br /> Membrane Type: Smgle Ply,Thermoplashc,TPO,Reinforced, Fleece Back
<br /> Deck Type lI: Wood,Insulated
<br /> Deck Description: 19I3��� or greater plywood or wood plank
<br /> System Type C: All layers of msulation simultaneously attached;membrane fully adhered.
<br /> All Generat and System Limitations apply.Roof accessories not listed in Table 1 of this NOA are not approved
<br /> and shall not be installed unless said accessories demonstrate compliance with prescriptive Florida Building
<br /> Code requirements and are field fabricated utilizing the approved membranes listed in Table 1.
<br /> Base insulation Laver lnsulation Fasteners Fastener
<br /> Table 3 Densi lft2
<br /> One of the following covered with the boards listed in Top Layer or Base or Top Layer.
<br /> Extruded Polystyrene,Energy-Lok,ACFoam-II,Poly ISO 2
<br /> Minimum 1"thick N/A N/A
<br /> Perlite
<br /> Minimum 3/4"thick N/A N/A
<br /> Note: All layers shall be simultaneously fastened; see top layer below for fasteners and density. lnsulation
<br /> panels listed are minimum sizes and dimensions; if larger panels are used,the number of fasteners shall be
<br /> increased maintaining the same fastener density. Please refer to Roofing Application Standard RAS 117 for
<br /> insulation attachment. Single and multiple layers of insulation can be attached to base layer with Carlisle
<br /> Olybond SOOBA,Carlisle Versigrip,Carlisle One Step.
<br /> Base or Ton Insulation Laver Insulation Fasteners Fastener
<br /> Table 3 Densitv/ftz
<br /> ENRGY-2,ENRGY-3,PSI-25,AC Foam II,Poly ISO 2,Polyisocyanurate HP,HP-W,HP-H,HP-N,Poly ISO 1
<br /> Minimum 1.5"thick 1, 10, 11, 14,17 or 28 1:2 ftZ
<br /> Minimum 2"thick 1, 16,21,22,25 or 28 1:4 ftZ
<br /> HP Recovery
<br /> Minimum 1"thick 1,5,1, 1�,11,14, 16,21,22 or 28 1:2 ft2
<br /> Multi-Mau FA,WHITELINE,PYROX,AP,Ultra/M-II Iso/glas
<br /> Minimum 1Z"thick 1,5,7,16,10, 11,14,21,22 or 28 1:2 ft2
<br /> ACFoam Composite,Poly 1SU 2 Composite,Rhotlex Composite,Fesco Foam
<br /> Minimum 1.5"thick 1,5,7,16,10,11,14,21,22 or 28 1:3 ft2
<br /> High Density Fiberboard
<br /> Minimum'/4"thick 5,7,10,11, 14,21,22 or 28 1:2.67 ftz
<br /> ISO 95+GL,HF,Rhoflex GL,HF
<br /> Minimum 1.2"thick 5,7 or 16 1:2 ftZ
<br /> Minimum 1.4"thick 7, 10,11,14, 17,21,22 or 28 1:3 ft2
<br /> NOA No.: 13-0411.03
<br /> MIAM4DADECOUNTY Expiration Date: 08/31/14
<br /> � '�''• ' Approval Date: 08/29/13
<br /> Page 7 of 10
<br />
|