Laserfiche WebLink
• � • • • <br /> i ' � • � • • <br /> � • • <br /> wwrw.boschsecurity.com ;� ����� <br /> Invented for life <br /> ;�:s.......,_e�" <br /> I � ► Supervises 12 or 24 VDC notification appliance <br /> circuits (NACs) <br /> ► Supervised signal silencing switch <br /> ► Notification appliance circuit rated at 3 0 A <br /> ► Multiple module configurations <br /> �� ► Mounts in panel enclosure <br /> The D192G Notification Appiiance Circuit (NAC) Multiple Module Configurations <br /> Module is used with the G Series (D9412GV4, Several modules can be connected to the same zone <br /> D7412GV4, G7212GV4, D9412GV3, D7412GV3, or point on the control panel or, if individual <br /> D7212GV3, D9412GV2, D7412GV2, D7212GV2, annunciation of a notification appliance circuit is <br /> D9412G, D7412G, and D7212G) Control Panels and desired, D192G modules can be connected to <br /> the D9124 Fire Alarm Control Panel The D192G separate zones or points on-board or through the <br /> Module is used for wiring connections to remote alarm D8128D OctoPOPIT Eight-point Expander <br /> devices. The wiring is supervised for open, short, or Mounts in Panel Enclosure <br /> grounded circuit faults. The D192G mounts inside the control panel enclosure <br /> using existing mounting holes or with a D137 or D138 <br /> � Mounting Bracket. Refer to the control panel's <br /> Supervises 12 VDC or 24 VDC NACs installation guide for more information on mounting. <br /> The D192G powers the notification devices from either <br /> the control panel's power supply or from a UL Listed ' ' ' ' ' ' ' ' • <br /> Auxiliary 12 VDC or 24 VDC regulated power-limited <br /> power supply for use with Fire Protective Signaling Australia C-tick <br /> Units and Commercial and Residential Burglar Units <br /> The choice of power supply allows the use of 12 V or <br /> 24 V notification devices <br /> Supervised Signal Silencing Switch <br /> The D192G Module has a toggle switch for silencing <br /> the notification devices while testing the alarm panel. <br /> When this toggle switch is in the Silence (Off) <br /> position, the D192G indicates a supervisory trouble <br /> condition to the control panel <br />