13-14769 - Laserfiche WebLink

Browse Search

FL 16266.1 C 1894-1 3.29.13 Page 2 of 3 Manufacturer: Union Corrugating Company Product Name: MasterR.ib Panel Panel Description: 36"wide coverage with 3/4"high ribs at 9"o.c. Materials: Minimum 29 ga., 80 ksi steel. Galvanized coated steel (ASTM A653) or Galvalume coated steel (ASTM A792} or painted steel (ASTM A755). New Underlayment: Minimum underlayment as per FBC 2010 Section 1507.4.5. Required for new construction and optional for reroofing construction. Existing Underlayment: One la.yer of asphalt shingles over one layer of#30 felt.For reroofing (Optional) construction only. Deck Description: Min 15/32" thick plywood for new and existing constructions. Designed and installed as per FBC 2010. Slope: 1/2:12 or greater in accordance with FBC 2010 Section 15Q7.4.2 Design Uplift Pressure: 45.0 psf @ fastener spacing of 24" o.c. (Factor of Safety=2) 113.1 psf @ fastener spacing of 12"o.c. Panel Attachment: #9-15 x 1.5" long wood screw with washer At panel ends @ 5.5"-3.5"-5.5"o.c. across panel width At intermediate @ 9" o.c. across panel width Sidelap Attachment: 1/4"-14 x 7/8" long SDS @ max 24"o.c. Test Standards: Roof assembly tested in accordance with UL580-94 `Uplift Resistance of Roof Assemblies', UL1897-98 `Uplift Tests for Roof Covering Systems'and FM 4470 Section 5.5 `Resistance to Foot Traffic'. Code Compliance: The product described herein has demonstrated compliance with FBC 2010 Section 1507.4 Product Limitations: Design wind loads shall be determined for each project in accordance with FBC 2010 Section 1609 or ASCE 7-10 using allowable stress design. The maximum fastener spacing listed herein shall not be exceeded. This product is not approved for use in the High Velocity Hurricane Zone. Fire classification is not within scope of this Evaluation Report. Refer to FBC 2010 Section 1505 and current approved roofing materials directory or ASTM E108/UL790 report from an accredited laboratory for fire ratings of this product.