Laserfiche WebLink
� <br /> �� " 97205.02-501-47 <br /> Architectural Testing Page4of6 <br /> Test Specimen Description: (Continued) <br /> Reinforcement: The lock rail contained a custom-shaped, formed steel reinforcement, <br /> reference Drawing No. UY0095. The exterior meeting rail, all sash stiles, and bottom rail <br /> contained a custom-shaped, formed steel reinforcement, reference Drawing No. UY0094. <br /> Installation: The unit was installed in a wood buck constructed of Spruce-Pine-Fir <br /> construction lumber and secured through the jambs using four #8 x 2-1/2" long screws, one <br /> at the top and bottom of each jamb. The exterior and interior perimeter was sealed with a <br /> silicone sealant, with the exception of an approximate 4" long void at each interior sill <br /> corner. A nominal 1/8" gap was maintained at the perimeter between the buck and window <br /> frame. <br /> Test Results: The temperature during testing was 67° F. The results are tabulated as follows: <br /> Para r�aph Title of Test- Test Method Results Allowed <br /> 1.4.2.1 Structural Performance Test per ASTM E 330 <br /> (Loads were held for 10 seconds) <br /> 1.4.2.1.1 25.0 psf(positive) No damage No damage <br /> 1.4.2.1.2 12.5 psf(negative) No damage No damage <br /> 1.4.2.2 Air Infiltration Test per ASTM E 283 <br /> 1.57 psf(25 mph) 0.13 cfm/ft2 0.5 cfm/ft2 max. <br /> 1.423 Water Resistance Test per ASTM E 547 <br /> (with and without insect screen) <br /> 2.86 psf No leakage No leakage <br /> AAMA 1704-01: <br /> 3.1.1 Clear opening width 31-5/8" 20" <br /> 3.1.2 Clear opening height 32-3/4" 24" <br /> 3.1.3 Clear opening area 7.2 ft2 5.0 ft2 <br /> 3.2.1 Locks and latches 4 lbf 20 Ibf <br /> 3.2.2 Operable sash 16 lbf 20 lbf <br /> 3.2.3 Removable screen 4 lb 5 lb <br />