Laserfiche WebLink
December 12, 2013 Sprinkler41c <br /> O MICROFAST�AND <br /> � � � � � MicrofastHP° QUICK <br /> RESPONSE PENDENT <br /> SPRINKLERS <br /> The Viking Corporation, 210 N Industriai Park Drive, Hastings MI 49058 <br /> Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email:techsvcs@vikingcorp.com <br /> . <br /> Ordinary 135°F(57 °C) 100°F(38°C) Orange <br /> Ordinary 155°F(68°C) 100°F(38°C) Red <br /> Intermediate 175 °F(79°C) 150 °F(65°C) Yellow <br /> Intermediate 200 °F(93°C) 150°F(65°C) Green <br /> High 286°F(141 °C) 225°F(107 °C) Blue <br /> Sprinkler Finishes: Brass, Chrome, White Polyester, Black Polyester, Black PTFE, and ENT <br /> Corrosion-Resistant Coatings':White Polyester, Black Polyester, and Black PTFE. ENT in all temperature ratings except 135 °F <br /> (57 °C). <br /> Footnotes <br /> 'The sprinkler temperature rating is stamped on the deflector. <br /> z Based on NFPA-13.Other limits may apply,depending on fire loading,sprinkler location,and other requirements of the Authority Having Jurisdiction. <br /> Refer to specific installation standards. <br /> 3 The corrosion-resistant coatings have passed the standard corrosion test required by the approving agencies indicated in the Approval Charts.These <br /> tests cannot and do not represent all possible corrosive environments. Prior to installation,verify through the end-user that the coatings are com- <br /> patible with or suitable for the proposed environment. For automatic sprinklers,the coatings indicated are applied to the exposed exterior surfaces <br /> only. Note that the spring is exposed on sprinklers with Polyester, PTFE,and ENT coatings. For ENT coated automatic sprinklers,the waterway is <br /> coated. <br /> � � 1 I <br /> � � _ __ � — � <br /> � � � �� <br /> _� <br /> Sprinkler Wrench �\r _j <br /> 16036W/B�� for i <br /> installing recessed i <br /> pendent sprinklers � <br /> i <br /> ��A 1/2' rntchet is required � <br /> � (not nvoiloble fron Vikiny), II I <br /> I <br /> r —� <br /> Carefully slide the �'°_°�__� <br /> wrench sideways � � i� �i <br /> around the protective �–––�' <br /> cap, ensuring engage– <br /> r�ent with the sprinkler <br /> wrench flats. <br /> Figure 2: Wrench 16036W/B for Recessed Pendent Sprinklers <br />