Laserfiche WebLink
' installation Instructions for Elixir 7Q0 Series Windows <br /> 1. Check that the rough opening is square and 1/2" larger than the window in <br /> width and height. <br /> 2. Apply a continuous 1/4" bead of silicone around the perimeter of the opening <br /> on the exterior sheathing where the windaw na's1 fin will cantact the wail. <br /> 3. Place temporary shims in both bottom corners and the cer�ter of the opening. <br /> 4. Insert the window into the opening and set the unit on the temporary shims. <br /> 5. Place temporary shims on all sides of the window until the unit is square. <br /> � 6, Place one nail or fastener in each corner of the nai! fin and eheck wir�dow <br /> operation. Adjust shims if necessary. <br /> 7. When �he window operates correctly and all interior site lines look correct, <br /> place a fastener in at least every other hole in the r�ail fin. Fasteners should have <br /> large heads, like raafing nails, for better performance. <br /> 8. Remove all shims and recheck window site lines and operation. Replace shims <br /> and adjust€asteners if necessary, Do not leave shims in the rough opening, <br /> 9. Due to vinyl's�expansion and contraction praperties, the window frame <br /> should not tauch the rough opening frame when properfy instal{ed. Vinyl <br /> windows shauld "flaat" in the openir►g to promote better operatior� after <br /> structure settling ar leveling. <br /> 1C1. Caver the nail fin and exteriar sheathing with a construction grade flashing <br /> tape. <br />