|
r�`����,.�� _ -
<br /> �`���..? TRINIIY�E�D
<br /> �
<br /> TABLE 1F-2: WOOD DECKS-NEW CONSTRUCTION,REROOF(TeaR-OFF)oR RECOVER
<br /> SYSTEM TYPE E: NON-INSULATED,MECHANICALY FASTEDED BASE SHEET,BONDED ROOF COVER
<br /> Base Sheet Roof Cover MDP
<br /> System Deck(See Note 1)
<br /> No• Type Faster Attachment Ply Cap �ps� .
<br /> CONVENTIONALSYSTEMS7
<br /> GAFGLAS#75 Base Sheet,Tri-Ply#75 Base Sheet,#80
<br /> Min. 19/32-inch Ultima Base Sheet,Ply 4,FlexPly 6 or Stretavent Eliminator 12-inch o.c.at 2-inch laps and 12- BP_� SBS- SBS-AA,SBS-
<br /> W-29. plywood at max.2 ft Nailable Venting Base Sheet,Ruberoid 20,Ruberoid SBS See Note 2 inch o.c,in two,equally spaced, � TA,SBS-CA, -45.0
<br /> spans Heat Weld Smooth or SBS Heat Weld 25 staggered center rows APP-TA
<br /> GAFGLAS#75 Base Sheet,Tri-Ply#75 Base Sheet,#80
<br /> Min. 19/32-inch Ultima Base Sheet,Ply 4, FlexPly 6 or Stretavent Eliminator 12-inch o.c.at 2-inch laps and 12- BP_� SBS- SBS-AA,SBS-
<br /> W-30. plywood at max.2 ft Nailable Venting Base Sheet,Ruberoid 20,Ruberoid SBS See Note 2 fnch o.c.in three,equally spaced, � TA,SBS-CA, -60.0
<br /> spans Heat Weld Smooth or SBS Heat Weld 25 staggered center rows APP-TA
<br /> Min. 19/32-fnch 9-inch o.c,at 4-inch laps and 9- �Optional) SBS-TA
<br /> W-31. plywood at max.2 ft GAFGLAS#80 Ultima Base Sheet Base,Ruberoid 20, See Note 2 inch o.c.in two,equally spaced, -60.0
<br /> spans Rubero(d MOP Smooth,Ruberoid MOP Smooth 1.5 staggered center rows SBS-TA (polyester only)
<br /> GAFGLAS#75 Base Sheet,Tri-Ply#75 Base Sheet,#80
<br /> Min. 19/32-inch Ultima Base Sheet,Ply 4,FlexPiy 6 or Stratavent Eliminator 8-fnch o.c,at 2-inch laps and 8- BP_� SBS_ SBS-AA,SBS-
<br /> W-32. plywood at max.2 ft Nailable Ventfng Base Sheet,Ruberoid 20,Ruberoid SBS See Note 2 inch o.c.1n three,equally spaced, AA TA,SBS-CA, -75.0
<br /> spans Heat Weld Smooth or SBS Heat Weld 25 staggered center rows APP-TA
<br /> FGLAS#75 Base Sheet Tri-PI #75 Base Sheet #80
<br /> � ' Ultima Base Sheet,Ply 4,FlexPly 6 or Stratavent Eliminator
<br /> W-33. plywood at max.2 ft Nailable Venting Base Sheet,Ruberoid 20,Ruberoid SBS See Note 2 inch o.c. in three,equally spaced, AA ' TA,SBS-CA, -105.0
<br /> spans Heat Weld Smooth or SBS Heat Weld 25 staggered center rows APP-TA
<br /> SELF-ADHERING SYSTEMSC
<br /> SBS-SA
<br /> Min. 19/32-inch 9-inch o.c.at 4-inch laps and 9- Note:Seams
<br /> W-34. plywood at max.2 ft StormSafe Anchor Sheet See Note 2 inch o.c.in three,equally spaced, (Optional) sealed with -60.0
<br /> spans (AccuTrec only) staggered center rows SBS-SA TOPCOAT58900
<br /> or Flexseal
<br /> Min. 15/32-inch 8-inch o.c.at 3-inch laps and 8-
<br /> W-35. plywood at max.2 ft Liberty MA Mechanically Attached Base Sheet See Note 2(HD �nch o.c,in two,equally spaced, �Optional) SBS-SA,SBS- _60.0
<br /> spans Fasteners only) staggered center rows SBS-SA TA or APP-TA
<br /> Exterior Research and Design,LLC.d/b/a Trinity�ERD Evaluation Report 01506.11.04-R12 for FL5680-R12
<br /> Certificate of Authorization#9503 Revision 12: 04/25/2014
<br /> Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 9 of 61
<br />
|