Laserfiche WebLink
TRINITY)ERD <br /> TABLE lA: WOOD DECKS-NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER <br /> SYSTEM TYPE C: MECHANICALLY ATTACHED INSUlAT10N,BONDED ROOP COVER <br /> System Deck Top Insulation Layer Roaf Cover/Adhesive MDP <br /> No. (See Note 1) Base Insulation Layer Type Fasteners Attach (PS� <br /> (Optional)One or more layers,any Min.1.5-inch Poly I50 1,H- i Mule-Hide TPO-c/WBBA 2000 or <br /> W-1 Min.19/32"plywood or wood plank Shield,ACFoam II,Poly ISO 2 or See Note 2 1 per 2 ft Mule-Hide TPO-c Bondin Adhesive '45.0' <br /> combination,loose laid ENRGY 3 g <br /> TABLE 1B: WOOD DECKS—NEUV CONSTRUCTION,REROOF(Tear-Off)or RECOVER <br /> SYSTEM TYPE D: INSULATED,MECHANICALLY ATTACHED ROOF COVER <br /> Insulatfon Layer <br /> System Roof Deck (See Note 14) Roof Cover MDP <br /> No. (psf) <br /> Type Attach Membrane Fasteners Spacing <br /> Min.19/32-inch plywood or wood plank at <br /> W Z max.24"spans attached using 8d ring shank One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 6-inch o.c.within 5.5-inch wide laps spaced 90.5-inch _52.5 <br /> nails spaced 6"o.c.in the field and#10 ring any combination attached TPO-c Seam Plates o.c. Outside of lap sealed with 1.5-inch heat-weld <br /> shank nails spaced 4"o.c.at the perimeter —� <br /> Min.19/32-inch plywood or wood plank at ----- -- <br /> W 3 max.24"spans attached using 8d ring shank One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 6-inch o.c.within 5.5-inch wide laps spaced 66.5-inch _67.5 <br />' nails spaced 6"o.c.in the field and#10 ring any combination attached TPO-c Seam Plates o.c. Outside af lap sealed with 1.5-inch heat-weld <br /> shank nails spaced 4"o.c.at the perimeter <br />, 6-inch o.c.within 5-inch wide laps spaced 67-inch o.c. <br /> Min.23/32-inch OSB at max.24-inch spans Outside of lap sealed with 1.5-inch heat-weld <br /> W 4 attached using 8d ring shank nails spaced 6" One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 and -67.5 <br /> o.c.in the field and 8"o.c.at intermediate any combination attached TPO-c Seam Plates 6-inch o.c.in one row centered between the laps, <br /> supports Center row covered with 6-inch wide cover strip <br /> sealed with 1.5-inch heat weld at all edges <br /> Exteriar Research and Design,LLC.d/b/a Trinlry I ERD , Evaluation Report M 15060.06.09-R3 for FL12772-R3 <br /> Certificate of Authorizatlon q9503 Revision 3:03/18/2015 <br /> Prepared by: Robert Nleminen,PE-59166 Appendix 1,Page 3 of 18 <br />