Laserfiche WebLink
a , <br /> ' . � li <br /> ' �R.(�6� ERQ <br /> 6. INSTALLATIO N: <br /> 6.1 Mule-Hide TPO-c Single Ply Roof Systems shall be installed in accordance with Mule-Hide Products Co., Inc. published <br /> , installation instructions,subject to the Limitations/Conditions of Use noted herein. <br /> 6.2 System attachment requirements for wind load resistance are set forth in Appendix 1. "MDP" = Maximum Design <br /> Pressure is the result of testing for wind load resistance based on allowable wind loads, and reflects the ultimate passing <br /> pressure divided by 2 (the 2 to 1 margin of safety per FBC 1504.9 has already been applied) Refer to FBC 1609 for <br /> determination of design wind pressures. , <br /> 63 For mechanically fastened membrane systems (Type D) over profiled steel deck, membrane shall be installed running <br /> perpendicular to steel deck flutes. <br /> 7. BUILDING PERMIT REQUIREMENTS: <br /> As required by the euilding Official or Authority Having Jurisdiction in order to properly evaluate the installation of this product. <br />' 8. MANUFACTURING PLANTS: <br /> Contact the noted QA agency for information on product locations covered to F.A.C.Rule 61G20-3 Qq requirements. <br /> 9. QUALITY ASSURANCE ENTITY: <br />� UL,LLC—QUA9625,(414)248-6409;karen.buchmann@ul.com <br /> -THE IS-PAGES THAT FOLLOW FORM PART OF THIS fVALUATION REPORT- <br /> � <br /> Exterior Research and Design,LLC. Evaluation Report M35060.06.09-R3 <br /> Cenifcate oJAuthoriration 119503 FL12772-R3 <br />� Revisian 3:03/18/2015 <br /> Page 4 of 4 <br />