6606 STADIUM DR (2) - Laserfiche WebLink

Browse Search

! � : � , � � ; BASIC MECHANICAL REQUIREMENTS � SECTION 15010 � i I ; 1.4 TECHNICAL DEFINITIONS A� p gy, as used herein, shall have the following meanings: . S ecific items of terminola � i 1. "Work" includes all materials, labor, equipment and operation required for complete and proper installation. ' 2. "Piping" shall mean pipe, fittings, flanges, valves, controls, hangers, traps, drain, I , insulation, vents, and items customarily required in connection with the transfer of ' � fluids. i 3. "Concealed" shall mean embedded in masonry or other construction, installed � behind wall furring, within double partitions or hung ceilings, in crawl spaces, in ' shafts. ; 4. "Exposed"'shall mean not concealed. � ' 5. "By Other Trades" shall mean by persons or parties responsible for work at the � project other than the party or parties who have been duly awarded the contract for the work of this trade. In the event that this document is used to acquire work as , , part of a general construction contract the words "by other trades" shall mean by � persons or parties who are not anticipated to be the subcontractor for this trade i working together with the General Contractor. In this context the words "by other jI trades"shall not be interpreted to mean not included in the overall contract. � ; 6. "Demolition" shall be the removal of any existing equipment, and the capping or i plugging of any existing services to that equipment. Removal shall include the proper evacuation of all environmentally hazardous gases, refrigerants or liquids � and proper disposal in accordance with all applicable codes and standards. 1.5 I INTERPRETATION OF THE DRAWINGS AND SPECIFICATIONS �A. As used in the drawings and specifications, certain non-technical words shall be ; understood to have specific meanings as follows: � ,, 1. "Furnish" shall mean purchase and deliver to the project site complete with every � ; necessary appurtenance and support. � � 2. "Install" shall mean unload at the delivery point at the site and perform every � operation necessary to establish secure mounting and correct operation at the j proper location in the project. � � 3. "Provide"shall mean"furnish"and"install". iB. Except where modified by a specific notation to the contrary, it shall be understood that � the indication and/or description of any item, in the drawings or specifications or both, I ; carries with it the instruction to furnish and install the item, regardless of whether or not � � this instruction is explicitly stated as part of the indication or description. I ' C. It shall be understood that the specifications and drawings are complementary and are to be taken together for a complete interpretation of the work. Exceptions are those notes on the drawings, which refer to an individual element of work, take precedence over the specifications where they conflict with same. i D. No exclusions from, or limitations in, the language used in the drawings or specifications I shall be interpreted as meaning that the appurtenances or accessories necessary to complete any required system or items of equipment are to be omitted. � � ' � I (97008-040497) 15010-2 � � � - - -