6606 STADIUM DR (2) - Laserfiche WebLink

Browse Search

I � � BASIC MECHANICAL REQUIREMENTS ' I , SECTION 15010 � i I � � � � � I G. Mechanical drawings are diagrammatic but shall be followed as closely as actual ' I , construction of the building and the work of other trades will permit. � � 1.7 APPROVED MATERIALS I A� Materials or products specified herein and/or indicated on drawings by trade name, � , manufacturer's name and/or catalog number shall be provided as specified. j Substitutions will not be permitted except as described herein in Supplementary and � ; General Conditions. � B: For approval of products other than those specified, bidders shall submit to the architect � ' a request in writing at least ten (10) days prior to bid date and hour. Requests received ; � after this time will not be reviewed or considered regardless of cause. Requests shall � ; clearly define and describe the product for which approval is requested. Requests shall be accompanied by manufacturer's literature, specifications, drawings, cuts, � ; performance data list of references or other information necessary to completely � ; describe the item. Approval will be in the form of an addendum to the specifications issued to all prospective prime contract bidders on record. The addendum will indicate the additional products which are approved for this project. C. A list of all materials and equipment which the Contractor proposes to furnish shall be - � � submitted for approval within ten (10)days after the contract has been let. Data shall be � � complete in all respects. � � �D. Where such approved substitution or deviation requires different quantity or arrange- � ' ment of foundations, supports, ductwork, piping, wiring, conduit, and any other i ' equipment or accessories normal to this equipment, Contractor shall furnish said � � changes and additions and pay all costs for all changes and additions and pay all costs j ' for the changes to the work and the work of others affected by this substitution or � deviation. � iE. Deviations mean the use of any listed Approved Manufacturer other than those on which i the drawings are based. I 1.8 iCOORDINATION OF MECHANICAL WORK �A. Refer to Division 1 for general coordination requirements. The contract documents are j ; diagrammatic in showing certain physical relationships of the mechanical work and the � ; interface with other work, including utilities and electrical work. Final coordination is the � responsibility of the Contractor. � i ; 1. Arrange mechanical work in a neat, well organized manner. Piping and services � ; shall run parallel to primary lines of the building construction, at a minimum of 7'-0" clearance. � 2. Locate operating and control equipment for ease of access. Arrange mechanical � work with required clearances for access for operation and maintenance. � ' 3. Advise other trades of openings required in their work. 4. Give right-of-way to piping which requires a slope for drainage. B. Coordination Drawings: Provide 1/4" drawings indicating mechanical equipment and/or electrical work when positioned within close proximity. � ; � , I � I ' (97008-040497) 15010-4 i I , i �