Laserfiche WebLink
. p 1 • <br /> • •• - 4 <br /> - , °�l ��''�``���;��� . <br /> . , <br /> TABLE 1A: WOOD DECICS-NEW COfVSYRUGTION,REROOF(Tear-Of�ar RECOVER , <br /> SYSTEM NPE C: MECHANICALLY ATiACF1ED INSULA710N,BOfUDED ROOF COVER <br /> Decic Top Insuladon Layer Roof Cover/Adhesive MDP � <br /> System Base Insulation Layer 1P�) <br /> No. (See Note 1) Type Fas4eners Attach <br /> Min.1.5-inch Poly ISO 1,H- Mule-Hide TPO-c/WBBA 2000 or <br /> (Optio�al)One or more layers,any Shleld,ACFoam II,Poly I50 2 or See Note 2 1 per 2 ft� '45•�x <br /> W-1 Min.19/32"plywood or wood piank combination,loose laid Mule-Hide TPO-c Bonding Adhesive <br /> ENRG1f 3 <br /> TABLE 16: WOOD DEf.i(S—NEIlV COiVSTRUCiION,REROOF(Tear-Off)or RECOVER <br /> SYSTEM SYPE D: INSUTATED,MECFlAiUICALLY ATTACHED ROOF COVER <br /> Insulation Layer Roof Cove� MDP <br /> System �a�pe�� (See IUate 34} (ps� <br /> No. Spacin <br /> Type Attaeh Membrane Fasteners g <br /> Min.19/'32-inch plywood or wood p�anlc at <br /> w 2 max.24"spans attathed using 8d ring shanlc One or more layers, Prefiminarily Mule-Hide IVlule-Hide EHD Fasteners and 2.4 6-inch o.c.within 5.5-inch wide laps spaced 90.5-inch _52.5 <br /> nails spaced 6"o.c.in the field and#10 ring any combination attached TPO-c 5eam Plates o.c. Outside of lap sealed with 1.5-inch heat-weld <br /> shanlc nails spaced A"o.c,at the erimeter <br /> Min.19/32-inch plywood orwood piahlc at <br /> W_3 max.24"spans attached using 8d ring shanlc dne or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 6-inch o.�Within 5.5-inch wide laps spaced 66.5-inch _67.5 <br /> nails spaced 6"o.c.in the field and#10 ring any combination attached TPO-c Seam Plates o.c. Dutside of lap sealed with 1.5-inch heat-weld <br /> shank nails spaced 4"o.c.at the perimeter <br /> 6-Inch o.c.Within 5-inch wide laps spaced 67-inch o.c. <br /> Outside of lap sealed with 1.5-inch heat-weld <br /> Min.23/32-inch OSB at max.24inch spans <br /> W� attathetl using 8d ring shank nails spaced 6" One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 and -67.5 <br /> o.c.in the field and 8"o.c,at intermediate any combination attached TPO-c Seam Plates 6-inch o.e.in one row centered between the laps. <br /> supports Center row covered with&Inch wide cover strip <br /> sealed with 1.5-inch heat weld at all edges <br /> Evaluation Report M15060.06.09-R3 for FL12772-R3 <br /> Exterfor Research and Design,LLC.d/b/a Trinity�ERD Revision 3:03/18/2015 <br /> Certiflcate of Authoriiation�79503 Appendix 1,Page 3 af 18 <br /> Prepared by: Robert Nieminen,PE-59166 <br />