Laserfiche WebLink
�,...,,w� ,:-�,`� <br /> �. �t�'�_, �'`� , <br /> � �' i <br /> �"� �.� `T'�1�16��E�� <br /> TABLE 1A: WOOD DECI(S-NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER <br /> SYSTEM TYPE C: MECHAMICALLY ATTACHED IMSULATIOPI,BONDED ROOF COVER <br /> System Oeck Top Insulation Layer MDP <br /> Base Insulation Layer Roof Cover/Adhesive <br /> �o• (See Note 1) Type Fasteners Flttach lPsf� <br /> Min.1.5-inch Poly ISO 1,H- <br /> (Optional)One or more layers,any Mule-Hide TPO-c/WBBA 2000 or <br /> W-1 M1n.19/32"plywood or wood plank combination,loose laid Shield,ACFoam II,Poly ISO 2 or See Note 2 1 per 2 ft2 Mule-Hide TPO-c Bonding Adhesive �5.0* <br /> ENRGY 3 <br /> TABLE 16: WOOD DE[KS—IVEUtI CONSTRUCTIORf,REROOF(Tear-Offl or RECOVER <br /> SVSTEM TYPE D: INSULATED,MECHAIUICALLY ATTACNED ROOF COVER <br /> Insulation Layer <br /> System Roof Cover MDP <br /> No. Roof Deck {See Note 14) <br /> (psf) <br /> Type Attach Membrane Fasteners Spacing <br /> Min.19/32-inch plywood or wood plank at <br /> W 2 max.24"spans attached using 8d ring shank One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 6-inch o.c.within 5.5-inch wide laps spaced 90.5-inch _52.5 <br /> nails spaced 6"o.c.in the field and#10 ring any combination attached TPO-c Seam Plates o.c. Outside of lap sealed with 1.5-inch heat-weld <br /> shank nails spaced 4"o.c.at the perimeter <br /> Min.19/32-inch piywood orwood plank at <br /> W 3 max.24"spans attached using 8d ring shank One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and 2.4 6-inth o.c.within 5.5-inch wide laps spaced 66.5-inch <br /> nails spaced 6"o.c.in the field and#10 ring any combination attached TPO-c Seam Plates o.c. Outside of lap sealed with 1.5-inch heat-weld -67.5 <br /> shank nails spaced 4"o.c.at the perimeter <br /> 6-inch o.c,within 5-inch wide laps spaced 67-inch o.c. <br /> Min.23/32-inch O58 at max.24-inch spans Outside of lap sealed with 1.5-inch heat-weld <br /> W 4 attached using 8d ring shank nails spaced 6" One or more layers, Preliminarily Mule-Hide Mule-Hide EHD Fasteners and Z.4 and <br /> o.c.in the field and 8"o.c.at intermediate any combination attached TPO-c Seam Plates �7•5 <br /> 6-inch o.c.in one row centered between the laps. <br /> supports Center row covered with 6-inch wide cover strip <br /> , sealed with 1.5-inch heat weld at all edges <br /> Exterior Research and Design,LLC.d/bJa Trinity�ERD <br /> Evaluation Report M35060.06.09-R3 for FL12772-R3 <br /> Certificate of Authorizatlon fi79503 Revision 3:03/18/2015 <br /> Prepared by: Robert Nieminen,PE-59166 Appendix 1,Page 3 of 16 <br />