Laserfiche WebLink
From:UNIOCO GROUP LLC 03/13/2018 14:15 #457 P.006/008 <br /> SECTION 1606 <br /> MATERIALS <br /> 1606.1 Scope. The requirements set forth in this section shall apply to the application of <br /> roof-covering materials specified herein. Roof coverings shall be applied in accordance <br /> with this chapter and the manufacturer's installation instructions. <br /> See attached installation detail. <br /> 1606.3 Pro-duct identification. Rbof covering materials shall be delivered in packages <br /> bearing the manufacturer's identifying marks and approved testing agency labels required <br /> in accordance with 1505. <br /> SECTION 1607 <br /> REQUIREMENTS FOR ROOF COVERINGS <br /> 1507.4 Metal roof panels. The installation of metal roof panels shall comply with the <br /> provisions of this section. <br /> 1607.4.1 Dock requirements. Metal roof panel roof coverings shall be applied to a solid <br /> or closely fitted deck, except where the roof covering is specifically designed to be applied <br /> to spaced supports. <br /> See attached limits of use. <br /> 1607.4.2 Dock slope. The minimum slope for lapped, nonsoldered seam metal roof <br /> panels with applied lap sealant shall be one-half unit vertical in 12 units horizontal (4- <br /> percent slope). <br /> See attached limits of use. <br /> caa <br /> 4GE F. <br /> 0 <br /> EN <br /> N0.44923 <br /> STATE og <br /> .1�b <br /> A AL <br /> SEP 2 2 2017 <br />