Laserfiche WebLink
QTRINITYIERD <br /> Cement over drip edge. <br /> Continue upslope in a similar manner, maintaining minimum 3-inch side-laps and minimum <br /> 6-inch end-laps, Ensure all end laps are staggered at least 18-feet apart. <br /> Use a hand roller to firmly bond side and end laps. <br /> 6.14.5 For non-tile applications, to mechanically attached anchor sheet: <br /> Install ASTM D226, Type II felt in accordance with codified requirements or StormSafe@ <br /> Anchor Sheet in accordance with Section 6.6. <br /> Install Weather Watch@ or Weather Watch@ XT Leak Barrier over the mechanically attached <br /> anchor sheet as noted above. <br /> 7. LABELING: <br /> Each unit shall bear a permanent label with the manufacturer's name, logo, city, state and-logo of the <br /> Accredited Quality Assurance Agency noted herein. <br /> S. BUILDING PERMIT REQUIREMENTS: <br /> As required by the Building Official or Authority Having Jurisdiction in order to properly evaluate the <br /> installation of this product. <br /> 9. MANUFACTURING PLANTS: <br /> Contact the manufacturer or the named QA entity for information on plants covered under Rule 9N-3 <br /> QA requirements. <br /> 10. QUALITY ASSURANCE ENTITY: <br /> Underwriters Laboratories- QUA1743; (847) 664-3281 <br /> END OF EVALUATION REPORT- <br /> Exterior Research and Design, LLC. Evaluation Report 01506.04.08-R5 <br /> Certificate of Authorization#9503 FL10626-RS <br /> Revision 5: 11/02/2011 <br /> Page 11 of 11 <br />