18-19793 - Laserfiche WebLink

Browse Search

FLORIDA ENERGY EFFICIENCY CODE, FOR BUILDING CONSTRUCTION Envelope Leakage Test Report Prescriptive and Performanc e Method Project Name: Ada 1672 Elev D Builder Name: DRH Express Homes Street: Permit Office: City,State,Zip: Zephyrhills,FL, Permit Number: Design Location: FL,Tampa Jurisdiction: Cond.Floor Area:: 1672 sq.ft. Cond.Volume' 14496. cu ft. Envelope Leakage Test Results Leakage Characteristics Regression Data: C: n: R: CFM(50): Single or Multi Point Test Data Ems' PRESSURE FLOW: 1 Pa cfm EqLA: 2 Pa cfm ACH: 3 Pa cfm ACH(50): 4 Pa cfm 5 Pa cfm SLA: 6 Pa cfm R402.4.1.2 Testing. The building or dwelling unit shall be tested and verified as having an air leakage rate of not exceeding 5 air changes per hour in Climate Zones I and 2,3 air changes per hour in Climate Zones 3 through 8.Testing shall be conducted with a blower door at a pressure of 0.2 inches w.g.(50 Pascals).Where required by the code official,testing shall be conducted by an approved third party.A written report of the results of the test shall be signed by the party conducting the test.and provided to the code official.Testing shall be performed at any time after creation of all penetrations of the building thermal envelope. During testing: 1.Exterior windows and doors,fireplace and stove doors shall be closed,but not sealed,beyond the intended weatherstripping or other infiltration control measures; 2.Dampers including exhaust,intake,makeup air,backdraft and flue dampers shall be closed,but not sealed beyond intended infiltration control measures; 3.Interior doors,if installed at the time of the test,shall be open; 4.Exterior doors for continuous ventilation systems and heat recovery ventilators shall be closed and sealed; 5.Heating and cooling systems,if installed at the time of the test,shall be turned off;and 6.Supply and return registers,If installed at the time of the test,shall be fully open. I hereby certify that the above envelope leakage Where required by the code official, performance results demonstrate compliance testing shall be conducted by an 0, with Florida Energy Code requirements in approved third party.A written accordance with Section R402.4.1.2. report of the results of the test shall be signed by the third party conducting the test and provided to SIGNATURE: the code official. PRINTED NAME: VWMVE DATE: BUILDING OFFICIAL: DATE: 1 1/1 1/2017 1:17 PIVI EnergyGauge@)USA-F1aRes2014 Section R405.4.1 Compliant Software Page 1 of 1