18-20260 - Laserfiche WebLink

Browse Search

Longitudinal Anchors LONGITUDINAL ANCHORS,TW0 PER I-BEAM,FOUR PER END Every home must be installed with protection from wind loads on each end of the home.'Florida rules require two anchors per I-beam.This means that a single section will require four longitudinal anchors per end for a total of eight for the home. A double section home will require eight anchors per end for a total of sixteen per home. As with all other anchors,these must be galvanized and installed with a 180 sq.in. galvanized stabilizer plate.Soil must be probed and recorded in order to match anchor model to site soil class. Single Section Double Section Home Frame Attachment Home Factory Brackets Some homes may have factory brackets welded to the I-beams for longitudinal anchors.Attach the strap/swivel connector to the factory bracket using a 1/2" Grade 5 bolt and nut.Anchors/ties must be installed to provide a 45'or lower strap angle. Factory Welded ` Bracket B 4 anchors with stabilizer plates 8 anchors with stabilizer plates ' per end for a total of 8 per end for a total of 16 longitu- longitudinal anchors per single dinal anchors per double section section home home Longitudinal Frame Attachment Beam Clamp Hole/Bracket I I I I Angle Frame Bracket�t��" Part#59009 e 4 45°or Less Gator Beam Clamp Part#59011 1. Determine anchor/stabilizer plate location and bracket location on I-beam to insure a 45`or lower strap angle. 1.Determine anchor/stabilizer plate location and 2. Drill a 1/2" hole in the centered in the I-beam as shown, bracket location on 1-beam to insure a 45'or lower Hole must be a minimum of 4"from any edge of the I- strap angle. beam. 2.Attach beam clamp with 1/2"Grade 5 bolts and nuts 3.Connect the two Frame brackets(R&L)with a 1/2" as shown. Grade 5 bolt and nut. 3.Connect swivel connector and strap to 4.Attach swivel connector and strap to angle frame brackets bolt nearest to anchor with a 1/2" Grade with 1/2" Grade 5 bolts and nuts.Tighten all bolts. 5 bolt and nut. TIE D• . a