Laserfiche WebLink
Driveways are not permitted off the Primary or Secondary Street if alleyway access is <br /> available. <br /> Circular designs and U-shaped driveways are not permitted. <br /> Paving Strips: Two ribbons of hardscape to be two (2) feet wide each with a three (3) foot center <br /> planting strip. The planting strip between paving strips must be maintained as a <br /> landscaped area using sod of the same variety elsewhere on the lot or groundcover that is <br /> native to Florida and listed as approved groundcover in the Zephyrhills LDC. <br /> If used for parking, the paved ribbons must be at least eighteen (18) feet in length, <br /> measured from the property line, to allow for a parked vehicle not to obstruct the <br /> function of the alleyway. <br /> Patios: Patios should be designed to be complementary to the building's architecture. This should <br /> include the dimensions, material selections, and surrounding landscaping. <br /> Loose materials such as but not limited to crush rock, gravel, and shell are not permitted <br /> materials for patios. Unpaved dirt patios are not permitted. Patios shall be constructed <br /> with approved materials which include, concrete, brick pavers and flagstone (or similar). <br /> Pervious materials are encouraged to be used for patios. <br /> Walkways: To help encourage ease of pedestrian ingress/egress of the lot and building, owners may <br /> utilize walkways.These walkways will help to preserve landscaping and sod on the lot. <br /> Railings, ramps and similar supporting facilities must be constructed to be harmonious <br /> with the buildings architecture. If ramps, railing and supporting facilities are being used <br /> for public access,they must meet ADA standards. <br /> Walkways from the front door, or porch steps, to the Primary or Secondary Street must <br /> be a minimum of three (3) foot in width measured perpendicularly from one edge to the <br /> other. Walkways accessing the Primary or Secondary Street must also be perpendicular <br /> to the Street. Walkways connecting to a public sidewalk must be constructed to be flush <br /> with the public sidewalk. <br /> Loose materials such as but not limited to crush rock, gravel, and shell are not permitted <br /> materials for walkways. Unpaved dirt walkways are not permitted. Walkways shall be <br /> constructed with approved materials which include concrete, brick pavers and flagstone <br /> (or similar). <br /> When selecting a color, choose one which complements the architecture of the building <br /> or the natural features of the landscaping within the lot. Pervious materials are preferred <br /> over impervious materials. <br /> When using brick pavers, stone pavers, or similar small dimension materials are installed, <br /> an invisible retaining edge must also be installed to prevent pavers from shifting. <br /> Other than clear sealers applied to walkways, other surface coatings, such as paint, are <br /> not permitted. Surfaces are to remain as natural in appearance as possible. <br /> Gateway Subdivision Design Standards 14 <br />