19-21343 - Laserfiche WebLink

Browse Search

Mandatory Requirements (as applicable) Mandatory requirements compiled by US Department of Energy and Pacific Northwest National Laboratory. Adopted with permission Topic Section Component Description Yes N/A Exempt - 1. To be checked by Designer or Engineer Insulation C303.2 Envelope Below-grade wall insulation installed per manufacturer's instructions. Insulation C303.2 Envelope Slab edge insulation installed per manufacturer's ❑ ® ❑ instructions. Insulation C303.2 Envelope Above-grade wall insulation installed per manufacturer's instructions. Insulation C402.3 Envelope High-albedo roofs satisfy one of the following: 3-year-aged solar reflectance>=0.55 and thermal emittance>=0.75 or 3-year-aged solar reflectance index>=64.0. Fenestration C402.4.4 Envelope U-factor of opaque doors associated with the ❑ El 13 building thermal envelope meets requirements. SYSTEM—SPECIFIC C403.2.12.1 Mechanical HVAC fan systems at design conditions do not ® ❑ ❑ exceed allowable fan system motor nameplate hp or fan system bhp. SYSTEM—SPECIFIC C403.2.12.2 Mechanical HVAC fan motors not oversized beyond allowable ® 13 ❑ limits. SYSTEM—SPECIFIC C403.2.3(8)Table Mechanical Heat Rejection Equipment:Minimum Efficiency ❑ El 0 Requirement meet those listed in Table C403.2.3(8) HVAC C403.2.7 Mechanical Exhaust air energy recovery on systems meeting 13 ® ❑ Table C403.2.7(1)and C403.2.7(2). SYSTEM—SPECIFIC C403.3 Mechanical Air economizers provided where required,meet 13 ® ❑ the requirements for design capacity,control signal,ventilation controls,high-limit shut-off, integrated economizer control,and provide a means to relieve excess outside air during operation. SYSTEM—SPECIFIC C403.3.2 Mechanical Economizer operation will not increase heating energy use during normal operation. SYSTEM—SPECIFIC C403.3.4, Mechanical Water economizers provided where required, ❑ C403.3.4.1, meet the requirements for design capacity, C403.3.4.2, maximum pressure drop and integrated C403.3.1 economizer control. SYSTEM—SPECIFIC C403.4.2.1 Mechanical Three-pipe hydronic systems using a common return for hot and chilled water are not used. SYSTEM—SPECIFIC C403.4.2.3.1 Mechanical Hydronic heat pump systems connected to a common water loop meet heat rejection and heat addition requirements. SYSTEM—SPECIFIC C403.4.3.4 Mechanical Open-circuit cooling towers having water cooled ❑ ® ❑ chiller systems and multiple or vairable speed condenser pumps,are designed so that tower cells can run in parallel with larger of flow crtieria. SYSTEM—SPECIFIC C404.2 Mechanical Service water heating equipment meets efficiency requirements. Wattage C405.3 Interior Lighting Exit signs do not exceed 5 watts per face. ® ❑ ❑ 2. To be checked by Plan Reviewer Plan Review C103.2 Envelope Plans and/or specifications provide all information ❑ 13 ❑ with which compliance can be determined for the building envelope and document where exceptions to the standard are claimed. EnergyGauge Summit®Fla/Com-2017.TAM 2017-1.0 Compliant Software.Effective Date:Dec 31,2017 Florida Building Code,Sixth Edition(2017)-Energy Conservation IECC 2015-Total Building Performance Compliance Option 10/5/2018 Page 9 of 22