19-21388 - Laserfiche WebLink

Browse Search

r-rRRINrry ERD TABLE 1A: WOOD DECKS-NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER SYSTEM TYPE C: MECHANICALLY ATTACHED INSULATION,BONDED ROOF COVER System Deck Top Insulation Layer MOP Base Insulation Layer Roof Cover(Note 16) No. (Note 1) Type I Fasteners Attach (psf) - Min.19/32"plywood or (Optional)One or more layers, Min.1.5-inch Poly ISO 1,H-Shield,ACFoam II, Mule-Hide TPO-c/TPO-c BA or Aqua W 1 wood plank any combination,loose laid Poly ISO 2 or ENRGY 3 Note 2 1 per 2 ftx Base 120 BA 45.0" TABLE 113: WOOD DECKS—NEW CONSTRUCTION,REROOF(Tear-Off)or RECOVER SYSTEM TYPE D-1: INSULATED,MECHANICALLY ATTACHED ROOF COVER System Roof Deck Insulation Layer(Note 14) Roof Cover MDP No. Type Attach Membrane Fasteners Spacing (psf) Min.19/32-inch plywood or wood plank at max.24"spans One or more Mule-Hide EHD W-2 attached using 8d ring shank nails spaced 6"o.c.in the field layers,any Preliminarily TPO-cMule- ide Fasteners and 2.4 6-inch o.c.within 5.5-inch wide laps spaced 90.5-inch attached PO c -52.5 and#10 ring shank nails spaced 4"o.c.at the perimeter combination Seam Plates o.c. Outside of lap sealed with 1.5-inch heat-weld Min.19/32-inch plywood or wood plank at max.24"spans One or more Mule-Hide EHD W-3 attached using 8d ring shank nails spaced 6"o.c.in the field layers,any Preliminarily TPO-c Mule-Hide Fasteners and 2.4 6-inch Outside within se inch wide laps spaced -wee inch -67.5 and#10 ring shank nails spaced 4"o.c.at the perimeter combination attached TPO-c Seam Plates O.C. Outside of lap sealed with 1.5-inch heat-weld 6-inch o.c.within 5-inch wide laps spaced 67-inch o.c. Min.23/32-inch OSB at max.24-inch spans attached using One or more Mule-Hide EHD Outside of lap sealed with 1.5-inch heat-weld and 6- W-4 8d ring shank nails spaced 6"o.c.in the field and 8"o.c.at layers,any Preliminarily Mule-Hide Fasteners and 2.4 inch o.c.in one row centered between the laps. -67.5 intermediate supports combination attached TPO-c Seam Plates Center row covered with 6-inch wide cover strip sealed with 1.5-inch heat weld at all edges TABLE 1C:WOOD DECKS-NEW CONSTRUCTION,REROOF(TEAR-OFF)OR RECOVER SYSTEM TYPE D-3: INSULATED,MECHANICALLY ATTACHED BASE SHEET,BONDED ROOF COVER System Deck(Note 1) Insulation(Note 14) Base Sheet Roof Cover MOP No. Type Attach Base Sheet Fasteners Attach Membrane Adhesive (psf) Min.19/32-inch plywood at One or more Atlas Summit Mule-Hide Drill Point 12-inch o.c.at the 4-inch laps and 12- Self- W-5 max.24-inch spans;#10 x 2- layers,any Loose-laid Synthetic Fastener and Mule-Hide 2" inch o.c.at three,equally spaced Mule-Hide SA-TPO -120.0 inch wood screws,6-inch o.c. combination Underlayment Seam Plate rows in the center of the sheet. adhered Exterior Research and Design,LLC.d/b/a Trinity)ERD Evaluation Report M15060.06.09-R5 for FL12772-RS Certificate of Authorization#9503 6T"EDITION(2017)FBC NON-HVHZ EVALUATION Revision 5:09/11/2017 Prepared by: Robert Nieminen,PE-59166 Mule-Hide TPO-c Single Ply Roof Systems;(608)365-3111 Appendix 1,Page 4 of 27