Laserfiche WebLink
L <br /> ROCK-IT CLIP SS 'I nSTa LL •Ac=entatfte6fmouEr��ocati�N <br /> 4afion Roy <br /> 1 Locate_all.parts <br /> •Locate'the Rock It.Clip SS,micro-inverter/power optimizer,and-the section of the module fram_ a in which <br /> you.will be-mounting the-micro=inverter/power optimizer. <br /> See fig.A foracceptable mounting locations. <br /> 2.install the Rock-it Clip SS <br /> • Slide the-Rock-lt Clip SS onto the lip of the module frame. <br /> • Slide the micro-inverter/power optimizer.into the opposite-lip of the.Rock:lt Clip SS. <br /> • Tighten the bolt to-1 50 in-lb minumum to clamp.the Rock-It Clip.SS to the module frame and the. <br /> micro-inverter/power optimizer to the Rock-It Clip SS: <br /> • .Ensure that the-lip on the clip is tight against the frame and that the micro-inverter/power optimizer flange is <br /> tight against the clip flange to avoid-rotation during tightening. <br /> ROCK-IT .CLIP 2.O inSTaLL <br /> Inverter Flange <br /> Module Frame <br /> Rock--Clip-2.0 <br /> 1 Locate ail parts <br /> -Locate the Rock-it Clip 2:0,micro-inverter/power optimizer,and the section of the module-frame in which you <br /> will be mounting the micro-inverter/power optimizer. <br /> 2_-Install the Rock-it Clip 2.0.(See below detail). <br /> • Slide the Rock-It Clip'2A onto the lip of the micro-inverter/power optimizer. <br /> •_Slide the-rriicro=inverter/power.optimizer into the opposite lip of the-module frame. <br /> • Tighten the.bolt to 1.50 in-lb.to clamp the Rock-It Clip 2.0 to the module frame and the micro-inverter/power <br /> optimizer to the Rock-It Clip 2.0. <br /> • Ensure that-the lip on the clip is tight.against.the frame and that the micro-inverter/power optimizer flange is <br /> tight against the clip flange to avoid rotation during tightening. <br /> www.ecofastensolar.com info@eco%stensolarcom 877-859-3947 7 <br />