Laserfiche WebLink
ROOF CAP SHEET <br /> PARADIENE 30 FIR TG * s1plast' <br /> Commercial Product Data Sheet <br /> Product Description COMMERCIAL PRODUCT INFORMATION <br /> Paradiene 30 FR TG is a high performance, torch grade Unit: Roll <br /> modified bitumen finish ply designed for use in homogeneous <br /> multi-layer modified bitumen roof membrane systems. Coverage: 0.75 Square (7.0 m2) <br /> Paradiene 30 FR TG consists of a lightweight random fibrous <br /> glass mat impregnated and coated with high quality styrene- Coverage Weight <br /> butadiene-styrene (SBS) modified bitumen, and surfaced with Per Square: Min: 112 lb (5.4 kg/mZ) <br /> ceramic granules. The back surface is coated with a high <br /> performance modified asphalt adhesive layer specifically Roll Length: Min: 25.25 ft (7.70 m) <br /> formulated for torch applications. The adhesive layer is <br /> manufactured using a special process that embosses the Roll Width: Avg: 3.28 ft (1.00 m) <br /> surface with a grooved pattern to provide optimum burnoff of <br /> the plastic film and maximize application rates. Thickness: Avg: 138 mils (3.5 mm) <br /> Paradiene 30 FR TG is available with Siplast RoofTag RFID Thickness at Selvage: Avg: 118 mils (3.0 mm) <br /> roof asset technology on a Special-Made-To-Order basis. See Min: 114 mils (2.9 mm) <br /> Roofrag Commercial Product Data Sheet for more information. Selvage Width: Avg: 2.75 in (70 mm) <br /> Product Uses <br /> Paradiene 30 FR TG is the finish ply of the Siplast Paradiene Selvage Surfacing: Burn-off Polyolefin Film <br /> 20 TG/30 TG System and is lapped 3 inches(7.6 cm)side and <br /> end. Siplast Paradiene 20 TG/30 TG Systems are torch Top Surfacing: No. 11 ceramic granules, standard color finish <br /> applied to approved substrates. Contact Siplast for specific is #A-720 Bone White. Contact Siplast for other available <br /> approval on product uses. colors. <br /> Product Approvals Back Surfacing: Polyolefin Film <br /> Contact Siplast for specific information regarding FM Class 1 <br /> windstorm resistance classifications. Lines: A laying line is placed 3 in (7.6 cm) from selvage edge <br /> of the material. The line color for this material is orange. <br /> Paradiene 30 FR TG is classified by Underwriters Laboratories <br /> for use in cULus Classified Siplast Paradiene 20 TG/30 FR TG Packaging: Rolls are wound onto a compressed paper tube. <br /> Roof Systems. Siplast Paradiene 20 TG/30 FR TG has been The rolls are placed upright on ends opposite the selvage on <br /> classified by Underwriters Laboratories as a Class A roofing pallets cushioned with corrugated cardboard and are adhered <br /> system over non-combustible, insulated non-combustible, and with adhesive at the labels. The top of the palleted rolls is <br /> insulated combustible decks and as a Class B roofing system covered with Kraft paper. The palleted material is protected by <br /> over combustible decks. a heat shrink polyethylene shroud. <br /> Paradiene 30 FR TG meets or exceeds the requirements of Pallet: 41 in X 48 in(104 cm X 122 cm)wooden pallet <br /> ASTM D6163 Type I, Grade G and CSA A123.23-15 Type A, Number Rolls Per Pallet: 25 <br /> Grade 1 for SBS-modified bituminous sheet materials using Number Pallets Per Truckload: 18 <br /> glass fiber reinforcements. Minimum Roll Weight: 84 lb(38.1 kg) <br /> Siplast Roof Systems also have received the approval of many Storage and Handling: All Siplast roll roofing products should <br /> regional and local authorities. Please contact Siplast for be stored on end on a clean flat surface. Care should be taken <br /> specific information as required. that rolls are not dropped on ends or edges and are not stored <br /> in a leaning position. Deformation resulting from these actions <br /> will make proper installation difficult. All roofing should be <br /> stored in a dry place, out of direct exposure to the elements, <br /> Current copies of all Siplast Commercial Product Data Sheets are and should not be double stacked. Material should be handled <br /> posted on the Siplast Web site at www.Siplast.com. in such a manner as to ensure that it remains dry prior to and <br /> during installation. <br /> WHITE GRANULAR SURFACE <br /> TORCH APPLIED Rev6/2019 <br /> Siplast 1000 Rochelle Blvd. 201 Bewicke Ave.,Suite 208 Customer Service in North America <br /> Irving,TX 75062-3940 North Vancouver,BC,Canada V7M 3M7 1.800.922.8800 www.siplast.com <br />