20-22223 - Laserfiche WebLink

Browse Search

SA-DACT Dialer SA-232 RS-232 interface The SA-DACT provides communications between the control The SA-232 card provides an RS-232 in- SA-232 wiring GNDck wire) panel and the central station over a telephone line system. It terface with VS panels. It can be used for TXD(while aewire) TXD(white wire) transmits system status changes(events)to a compatible digital connecting a printer to the control panel RXD(red wire) alarm communicator receiver over the public switched telephone to print system events.The card also network.The dialer is capable of single, dual, or split reporting can be used for connecting a computer ®� of events to two different account and telephone numbers.The to download a configuration program Pr modem feature of the SA-DACT can also be used for uploading from the VS-CU to the control panel. and downloading panel configuration, history, and current status to a PC running the VS-CU. The RS-232 card is installed on the plas- tic assembly and connects to the main circuit board via a ribbon SA-DACT Phone line 2 cable. wiring To wall Phone line 1 phone Jack - SA-232 specifications Phone cables Operating voltage Standard EIA-232 (supplied) RJ31 jacks � _Terminal rating _ 12 to18 AWG(0.75 to 2.5 sq mm) The dialer phone lines connect to Operating environment connectors on the dialer's main Temperature 32 to 120°F(0 to 49°C) ® ® circuit board.Phone line 1 connects Humidity 0 to 93%RH,noncondensing at 90°F(32°C) to connector J4 and phone line 2 connects to connector J1. ?O XtEl:(moo SA-CLA Class A Module(VS1 only) o❑❑®e® 0 The SA-CLA card provides Class A capability for NAC wiring. o❑❑❑LJ a Its terminal block provides the wiring connection for NAC return ❑0Co$ Do wiring.The card is required for annunciator Class A wiring even though this wiring does not return to the SA-CLA card.The SA- The SA-DACT queues mes- CLA is compatible with VS1 control panels only.VS4 panels are sages and transmits them based on priority(alarm, supervisory, Class A Ready.The SA-CLA is installed directly to the control trouble, and monitor).Activations are transmitted before restora- panel circuit board using its plastic standoffs and plug connection. tions. SA-CLA specifications The SA-DACT is installed on the plastic assembly and connects to Operating voltage 24 VFWR _ the main circuit board via a ribbon cable. Operating current 3.75 A FWR total at 120/230 VAC 60 Hz SA-DACT specifications 3.0 A FWR total at 230 VAC 50 Hz 2.5 A max per circuit Phone line type One or two loop-start lines on a public, network _Circuit impedance 26 ohms,0.35uF switchedTerminal rating 12 to18 AWG(0.75 to 2.5 sq mm) Phone line connector RJ-31/ network 8� Operating environment Communication formats Contact ID(SIA DC-05) Temperature 32 to 120°F(0 to 49°C) Operating environment Humidity 0 to 93%RH,noncondensing at 90°F Temperature 32 to 120°F(0 to 49°C) (32°C) Humidity 0 to 93%RH,noncondensing at 90°F - (32°C) Compatible DACRs D16L-VS LED Display Expander(VS4 only) Receiver Models Formats The D16L-VS LED Display Expanders provide LED annuncia- Ademco 685 Contact ID tion for up to 16 zones. It provides two LEDs for each zone.Two FBII CP220 Contact ID D16L-VS LED display expanders can be installed in each VS4 Osborne-Hoffman OH 2O00 Contact ID panel. Bosch D6600 Contact ID Silent Knight 9800 Contact ID (3) (4) SG- LR , LR2� Contact ID (2)Sur Gard � 8oO nU �] 1� 81zo n R❑ o 7O � (1)LED 1 (sl (2)LED 2 (3)LED Expander 1 (4)LED Expander 2 (5)Alarm/non-alarm and trouble zone LEDs 0 Page 6 of 8 D A FA S H E C r V85005-0135 J Not to L"r, jac;o For Issue 1.3