Laserfiche WebLink
Page 3 of 7 <br /> ® STANDARD RESPONSE <br /> • DRY PENDENT STANDARD 41KING4ORIFICE SPRINKLERS <br /> The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058 <br /> Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com <br /> Visit the Viking website for the latest edition of this technical data page. <br /> 7. AVAILABILITY <br /> The Viking Standard Response Dry Pendent Sprinkler is available through a network of domestic and international distributors.See <br /> The Viking Corporation web site for the closest distributor or contact The Viking Corporation. <br /> 8. GUARANTEE <br /> For details of warranty, refer to Viking's current list price schedule or contact Viking directly. <br /> ME <br /> Sprinkler Temperature Sprinkler Nominal Maximum Ambient Bulb Color <br /> G�lassification , Tempe tuAre Ra�tt'ng' Ceiifi <br /> ng Teperature? <br /> Ordinary 155°F 68°C 100 °F 38 °C Red <br /> d' °F (72 -C) 150 'F(65 'Q ____)a1JJQw <br /> Intermediate 200°F (93 °C) 150°F(65 °C) Green <br /> 19 ue <br /> Sprinkler Finishes: Brass, Chrome, White Polyester, and ENT <br /> Corrosion-Resistant Coating'':White Polyester and ENT in all temperature ratings <br /> Footnotes <br /> 'The sprinkler temperature rating is stamped on the deflector. <br /> z Based on NFPA-13.Other limits may apply,depending on fire loading,sprinkler location,and other requirements of the Authority Having Jurisdiction. <br /> Refer to specific installation standards. <br /> 'The corrosion-resistant Polyester and ENT coatings have passed the standard corrosion test required by the approving agencies indicated <br /> in the Approval Charts.These tests cannot and do not represent all possible corrosive environments.Note:These coatings are NOT cor- <br /> rosion proof.Prior to installation,verify through the end-user that the coatings are compatible with or suitable for the proposed environ- <br /> ment. Polyester and ENT coatings are applied to the exposed exterior surfaces only. Note that the spring is exposed on sprinklers with <br /> Polyester and ENT coatings. <br /> 4 When installed in some corrosive environments,the Polyester finish may change color.This natural discoloration over time is not in itself <br /> an indication of corrosion and should not be treated as such.All sprinklers installed in corrosive environments should be replaced or <br /> tested as described in NFPA 25 on a more frequent basis. <br /> Wrench 07565W/Bxx <br /> must be used for <br /> Installing recessed I <br /> dry sprinklers Step 2, Carefully press <br /> Step 1i Carefully — xxA 1/2' ratchet the wrench upward and <br /> slide the wrench Is required (not ��__ turn slightly to ensure <br /> sideways around the available from Viking), engagement with the <br /> the sprinkler deflector sprinkler wrench flats. <br /> Figure 2: Wrench 07565WIB for Adjustable Recessed Dry Pendent Sprinklers <br /> Form No. F_071591 18.06.21 Rev 18.1 <br />