Laserfiche WebLink
M IAM I-DADE MIAMI-DADE COUNTY <br /> PRODUCT CONTROL SECTION <br /> 11805 SW 26 Street,Room 208 <br /> DEPARTMENT OF REGULATORY AND ECONOMIC RESOURCES(RER) Miami,Florida 33175-2474 <br /> BOARD AND CODE ADMINISTRATION DIVISION T(786)315-2590 F(786)315-2599 <br /> NOTICE OF ACCEPTANCE (NOA) vnvw.miamidadL.gov/building <br /> PGT Industries,Inc. <br /> 1070 Technology Drive <br /> North Venice,FL 34275 <br /> SCOPE:This NOA is being issued under the applicable rules and regulations governing the use of construction <br /> materials. The documentation submitted has been reviewed and accepted by,Miami-Dade County RER - <br /> Product Control Section to be used in Miami Dade County and other areas where allowed by the Authority <br /> Having Jurisdiction(AHJ). <br /> This NOA shall not be valid after the expiration date stated below. The Miami-Dade County Product Control <br /> Section(In Miami Dade County)and/or the AHJ(in areas other than Miami Dade County)reserve the right to <br /> have this product or material tested for quality assurance purposes. If this product or material fails to perform <br /> in the accepted manner,the manufacturer will incur the expense of such testing and the AHJ may immediately <br /> revoke,modify,or suspend the use of such product or material within their jurisdiction. RER reserves the right <br /> to revoke this acceptance if it is determined by Miami-Dade County Product Control Section that this product <br /> or material fails to meet the requirements of the applicable building code. <br /> This product is approved as described herein and has been designed to comply with the Florida Building Code, <br /> including the High Velocity Hurricane Zone. <br /> DESCRIPTION: Series "DH-5460"PVC Double Hung Window—N.I. <br /> APPROVAL DOCUMENT: Drawing No. MD-DH5460-01 titled"Double Hung Window Installation- <br /> NI", sheets 1 through 12 of 12, dated 05115115,with revision C dated 03/11/20,prepared by manufacturer, <br /> signed and sealed by Anthony Lynn Miller,P.E.,bearing the Miami-Dade County Product Control Revision <br /> stamp with the Notice of Acceptance number and expiration date by the Miami-Dade County Product <br /> Control Section. <br /> MISSILE IMPACT RATING: None <br /> LABELING: Each unit shall bear a permanent label with the manufacturer's name or logo, city, state, <br /> model/series, and following statement: "Miami-Dade County Product Control Approved", unless otherwise <br /> noted herein. <br /> RENEWAL of this NOA shall be considered after a renewal application has been filed and there has been no <br /> change in the applicable building code negatively affecting the performance of this product. <br /> TERMINATION of this NOA will occur after the expiration date or if there has been a revision or change in <br /> the materials,use,and/or manufacture of the product or process.Misuse of this NOA as an endorsement of any <br /> product,for sales,advertising or any other purposes shall automatically terminate this NOA.Failure to comply <br /> with any section of this NOA shall be cause for termination and removal of NOA. <br /> ADVERTISEMENT: The NOA number preceded by the words Miami-Dade County,Florida,and followed <br /> by the expiration date may be displayed in advertising literature. If any portion of the NOA is displayed,then <br /> it shall be done in its entirety. <br /> INSPECTION: A copy of this entire NOA shall be provided to the user by the manufacturer or its distributors <br /> and shall be available for inspection at the job site at the request of the Building Official. <br /> This NOA renews and revises NOA#17-0630.09 and consists of this page 1 and evidence pages E-1,E-2, <br /> E-3 and E-4, as well as approval document mentioned above. <br /> The submitted documentation was reviewed by Carlos M.Utrera,P.E. <br /> NOA No.20-0401.05 <br /> MIAMFD4DE COUNTY Expiration Date: September 17,2025 <br /> Approval Date:July 30,2020 <br /> Page 1 <br />