Laserfiche WebLink
s <br /> PGT Industries,Inc. <br /> NOTICE OF ACCEPTANCE: EVIDENCE SUBMITTED <br /> 1. Evidence submitted under NOA# 17-0630.09 <br /> A. DRAWINGS <br /> 1. Manufacturer's die drawings and sections. <br /> (Submitted under NOA No. 15-0812.03) <br /> 2. Drawing No. MD-DH5460-01 titled "Double Hung Window Installation - NI", sheets <br /> 1 through 12 of 12, dated 05115115, with revision B dated 06/06/17, prepared by <br /> manufacturer, signed and sealed by Anthony Lynn Miller,P.E. <br /> B. TESTS <br /> 1. Test reports on: 1)Uniform Static Air Pressure Test,Loading per FBC, TAS 202-94 <br /> 2) Large Missile Impact Test per FBC, TAS 201-94 <br /> 3) Cyclic Wind Pressure Loading per FBC, TAS 203-94 <br /> along with marked-up drawings and installation diagram of a PVC sliding glass door, a <br /> PVC fixed window and an aluminum sliding glass door, using: Kodispace 4SG TPS <br /> spacer system, Duraseal® spacer system, Super Spacer®NXTTM spacer system and XL <br /> EdgeTM spacer system at insulated glass, prepared by Fenestration Testing Laboratory, <br /> Inc., Test Reports No. FTL-8717,FTL-8968 and FTL-8970, dated 11/16/15, 06/07/16 <br /> and 06/02/16 respectively, all signed and sealed by Idalmis Ortega,P.E. <br /> (Submitted under previous NOA No. 16-0714.08) <br /> 2. Test reports on: 1)Air Infiltration Test, per FBC, TAS 202-94 <br /> 2)Uniform Static Air Pressure Test, Loading per FBC TAS 202-94 <br /> 3)Water Resistance Test,per FBC, TAS 202-94 <br /> 4) Forced Entry Test,per FBC 2411.3.2.1, and TAS 202-94 <br /> 5) Large Missile Impact Test per FBC, TAS 201-94 <br /> 6) Cyclic Wind Pressure Loading per FBC, TAS 203-94 <br /> along with marked-up drawings and installation diagram of series 5460 and series <br /> 5560 PVC double hung windows,prepared by Fenestration Testing Laboratory, Inc., <br /> Test Report No. FTL-8006, dated 04/27/15, signed and sealed by Idalmis Ortega,P.E. <br /> (Submitted under NOA No. 15-0812.03) <br /> C. CALCULATIONS <br /> 1. Anchor verification calculations and structural analysis, complying with FBC-511 <br /> Edition (2014) and FBC 6th Edition (2017), dated 07/30/15 and updated on 08/29/17, <br /> prepared by manufacturer, signed and sealed by Anthony Lynn Miller, P.E. <br /> (Submitted partially under NOA No. 15-0812.03) <br /> 2. Glazing complies with ASTM E1300-09. <br /> Carlos M.Utrera,P.E. <br /> Product Control Examiner <br /> NOA No.20-0401.05 <br /> Expiration Date: September 17,2025 <br /> Approval Date:July 30,2020 <br /> E-1 <br />