Laserfiche WebLink
Cox Fire Protection <br /> Fitting Submittal <br /> All fittings to be used on this project meets or exceeds the requirements of one or more of the <br /> following standards as required by Section 6.4 of NFPA 13-2016 edition: <br /> ASME B16.4 Cast Iron Threaded Fittings, Class 126 and 260 <br /> ASME B16.3 Malleable Iron Threaded Fittings, Class 150 and 300 <br /> ASME B16.9 Factory-Made Wrought Steel Buttweld Fittings <br /> ASME B16.25 Buttwelding End for Pipe, Valves, Flanges, & Fittings <br /> ASTM A 234 Specification for Piping Fittings of Wrought Carbon Steel and <br /> Alloy Steel for Moderate and Elevated Temperatures <br /> Threaded Fittings <br /> All threaded fittings shall have threads cut to ASME B1.20.1, Pipe Threads, General Purpose <br /> (Inch), per Section 6.5.1.1 of NFPA 13-2016 Edition. <br /> Manufacturers may vary. All fittings shall be of the same manufacturer for a single project. <br /> Acceptable Manufacturers may include: <br /> • AnvilStar <br /> • Anvil <br /> • Smith Cooper <br /> • Vanderwater International <br /> • BIS <br /> All threaded fittings shall be installed in strict accordance with the guidelines of NFPA 13 and <br /> therefore requires no special submittal of specific manufacturer's installation instructions. <br />