Laserfiche WebLink
Cox Fire Protection <br /> Fitting Submittal <br /> Welded Fittings <br /> All welded fittings shall be in accordance with Section 6.5.2.2 through 6.5.2.6, NFPA 13-2016 <br /> Edition. Welded sprinkler pipe shall be shop welded. <br /> Manufacturers of welded outlets may vary. All fittings shall be of the same manufacturer for a <br /> single project. <br /> Acceptable Manufacturers may include: <br /> • Aegis technologies <br /> • Sigma Piping Products <br /> • Anvil/Merit <br /> • Smith Cooper <br /> All welded fittings shall be installed in strict accordance with the guidelines of NFPA 13 and <br /> therefore requires no special submittal of specific manufacturer's installation instructions. <br /> Grooved Fittings <br /> All grooved joints shall contain cut, rolled, or cast grooves that are dimensionally compatible with <br /> the couplings, per Section 6.5.3.1 of NFPA 13-2016 Edition. All grooved couplings and fittings <br /> shall be listed in compliance with standardized groove specifications. <br /> Manufacturers may vary. All fittings shall be of the same manufacturer for a single project. <br /> Acceptable Manufacturers may include: <br /> • Victaulic/Firelock <br /> • Anvil <br /> • Titus <br /> All grooved fittings shall be installed in strict accordance with the guidelines of NFPA 13 and <br /> therefore requires no special submittal of specific manufacturer's installation instructions. <br />