Laserfiche WebLink
Cox Fire Protection <br /> Hanger Submittal <br /> All Hangers to be used on this project meets or exceeds the requirements standards required by <br /> Section 9.1 of NFPA 13-2016 Edition. <br /> All sprinkler piping shall be supported from the building structure. The components of hanger <br /> assemblies shall that attach directly to the building structure and pipe shall be listed. Hanger <br /> spacing shall not exceed the limits provided in NFPA 13-2016 Edition. <br /> Hanger Rod <br /> All threaded rod shall meet the requirements of NFPA 13-2016 Edition, Section 9.1.2. <br /> Manufacturers may vary. All rod shall be of the same manufacturer for a single project. <br /> Acceptable Manufacturers may include: <br /> • Erico <br /> • Caddy <br /> • Anvil <br /> • Vulcan <br /> • FPPI <br /> Concrete Fasteners <br /> Concrete Fasteners shall be a listed insert set in concrete or list post-installed anchor. <br /> Manufacturers may vary. All fasteners shall be of the same manufacturer for a single project. <br /> Acceptable Manufacturers may include: <br /> • Sammy <br /> • Hilti <br /> • Red Head <br /> • Lansdale <br /> • Simpson <br /> • FPPI <br /> All fasteners shall be installed in strict accordance with the guidelines of NFPA 13 and therefore <br /> requires no special submittal of specific manufacturer's installation instructions. <br />