Laserfiche WebLink
ROCK-IT CLIP SS inSTa.LL AccePt.a5�z5,oim,ugLucatfois , <br /> r° t�c <br /> I �-- .2'Llin.from <br /> l . JuncaonBoy <br /> I <br /> 1 Locate all parts <br /> -Locate the Rock-It Clip SS,micro-inverter/power optimizer,and the section of:the module frame in which <br /> you will be mounting the micro-inverter/power optimizer. <br /> See fig.A for acceptable mounting locations. <br /> 2 Install.the Rock-It Clip SS <br /> • Slide the Rock-It Clip SS onto the lip of the module frame. <br /> • Slide the micro-inverter/power optimizer into the-opposite lip-Of the Rock-It Clip_SS. <br /> • Tighten the bolt-to 1-50 in=1b minumum to clamp the Rock-It Clip SS to the module frame and the <br /> micro-inverter/power optimizer to the Rock-It Clip SS. <br /> • Ensure that the lip on the clip is tight against the frame and that the micro-inverter/power optimizer flange is <br /> tight against the clip flange to avoid rotation during tightening. <br /> ROCK-IT CLIP 2.O inSTaLL <br /> Panel G.lass <br /> Inverter Flange <br /> e <br /> A <br /> Module Frame <br /> Rock-I1:401p 2.0 <br /> 1 Locate all parts <br /> -Locate the Rock-it Clip 2.0,micro-inverter/power.optimizer,and the section of the module frame in which you <br /> will be mounting the micro-inverter/power optimizer. <br /> 2 Install.the Rock-At Clip 2.0(See below detail). <br /> • .Slide the Rock-It Clip 2.0 onto the lip of the micro-inverter/power.optimizer. <br /> • Slide the micro-inverter/power optimizer into the opposite lip of the module frame. <br /> • Tighten the bolt to 150 in-lb to clamp the Rock-It Clip 2.0 to the module frame.and the micro-inverter/power <br /> optimizer to the-Rock-It Clip 2.0. <br /> • Ensure that the lip on the clip is tight against the frame and that the micro-inverter/power optimizer flange is <br /> tight against the clip flange to avoid rotation during tightening.- <br /> www.ecofastensolar.com info@ecofastensolar.com 877-859-3947 7 <br />