Laserfiche WebLink
+ 1 <br /> 1� CAUTION <br /> ELECTRICAL PRECAUTIONS <br /> ■ Ensure all electrical conductors.are-at zero voltage potential-before installing or servicing this unit-. <br /> ■ Never break contact on a.circuit without using.the appropriate disconnect device. <br /> ■ Follow established lockout and.tagout procedures for-all electrical conductors prior to servicing. <br /> ■ Beware of power-.lines in the vicinity of the roof,.where.inadvertent.contact may result in electrocution,. <br /> personal injury,.or death. <br /> ■ When disconnecting source-or supply circuits, provide sufficient time as stated in the.power.electronics <br /> manufacturer's instruction manual in order to-ensure discharge of all conductors-in the circuit. <br /> • Always verify the integrity and proper installation-of the electrical components prior to energizing electrical. <br /> circuits. <br /> ■ Non-metallic enclosures do not provide.grounding means between conduit connections. The use of <br /> grounding hubs and,jumper wires are required. <br /> ■ Grounding must be sized per NEC requirements, and is the responsibility of the installer. <br /> MECHANICAL PRECAUTIONS <br /> ■ When drilling into an attic space, ensure that <br /> electrical wires, mechanical obstructions, or <br /> potential electrical hazards are removed from <br /> the vicinity and direction of the drill. <br /> ■ Do not install if the roof is wet, frosted, or <br /> covered by ice or snow. <br /> ■ If any part of this.product becomes damaged, • <br /> remove and.destroy the entirety of-the unit. <br /> Failure--to do so may result in fire, property <br /> damage, -personal injury, electrocution, or <br /> death. <br /> ■ Do not use the product to anchor fall protection <br /> equipment. <br /> www.soltection.com Soltection R]-1 Installation-Manual Page 5 <br />