My WebLink
|
Help
|
About
|
Sign Out
Browse
Search
21-1630
Zephyrhills
>
Building Department
>
Permits
>
2021
>
21-1630
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
5/9/2022 11:43:10 AM
Creation date
5/9/2022 11:43:07 AM
Metadata
Fields
Template:
Building Department
Building Department - Doc Type
Permit
Permit #
21-1630
Building Department - Name
OTERO,JUAN & ELSIE
Address
37420 CASTLEBERRY AVE
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
36
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
OMEMO I etc. <br /> TABLE 2B:WIND CLASSIFICATIONS,STARTER STRIPS AND HIP&RIDGE <br /> Type Product FBC Table 1507.2.7.1 or R905.2.6.1 <br /> Starter Strip Shingle <br /> Starter Strips Starter Strip Plus ASTM D3161,Class F <br /> SRS TopShield Starter <br /> Berkshire Hip and Ridge Shingles with Sealant <br /> Hip&Ridge DuraRidge®Hip and Ridge Shingles with Sealant <br /> ASTM D3161,Class F <br /> Shingles ProEdge® <br /> WeatherGuard®HP Hip and Ridge Shingles <br /> 5.5.2 Refer to Owens Corning published information on wind resistance and installation limitations. <br /> 5.6 All components in the roof assembly shall have quality assurance audit in accordance with F.A.C. Rule 61G20-3. <br /> Refer to the Product Approval of the component manufacturer for components that are produced by a Product <br /> Manufacturer other than the report holder on Page 1 of this Evaluation Report. <br /> INSTALLATION:6. <br /> 6.1 GENERAL: <br /> 6.1.1 Roof deck, slope, underlayment and fasteners shall comply with FBC 1507.2 / R905.2 and the shingle <br /> manufacturer's minimum requirements. <br /> 6.1.2 Underlayment shall be acceptable to the shingle manufacturer and shall hold current Florida Statewide Product <br /> Approval,or be Locally Approved per Rule 61G20-3,per FBC Sections 1507.2.3,1507.2.4 or R905.2.3. <br /> 6.1.3 Fasteners shall be in accordance with the shingle manufacturer's published requirements, but not less than FBC <br /> 1507.2.6 or R905.2.5. Staples are not permitted. <br /> 6.1.4 Owens Corning asphalt shingles are acceptable for use in reroof(tear-off)or recover applications,subject to the <br /> limitations set forth in FBC Section 1511 or R908 and published installation instructions. <br /> 6.2 ACCESSORY STARTERS: <br /> 6.2.1 Installation of Starter Strip Shingle, Starter Strip Plus and SRS TopShield Starter shall comply with the Owens <br /> Corning current published instructions,using minimum five(5)nails per strip. <br /> Fdtundedavment Deck Fekundedayment Deck Selkdhered <br /> WeathetLoela") <br /> Self-adhered undcdayment <br /> WeatherLock° <br /> underlayment <br /> Drip <br /> - Drip edge <br /> edge Ddp edge Drip <br /> edge <br /> Naik located Naffs mated <br /> from eave r_r from cave <br /> htstaQ Test Self-searing adhesive Seleearmg adhesive <br /> Starter Strip positioned along cave hl fir <br /> st Starter Strip Plas positioned along cave <br /> shingle with \ with 6'removed \ <br /> it removed <br /> Starter Strip shingle overhangs eaves and rakes'/i=t/a" Scoter Strip Plus overhangs eaves and rakes t/4"—L4' <br /> Figure 1:Minimum Nailing,Starter Strip Figure 2:Minimum Nailing,Starter Strip Plus <br /> NEMO ETC,LLC Evaluation Report 037940.02.12-1111 <br /> Certificate of Authorization#32455 7-EDITION(2020)FBC NON-HVHZ EVALUATION F1.10674-1116 <br /> Owens Corning Asphalt Roof Shingles Revision 11:12/11/2020 <br /> Page 4 of 10 <br />
The URL can be used to link to this page
Your browser does not support the video tag.