|
r-
<br />OUTLINE SPECIFICATION
<br />09 29 00 - GYPSUM BOARD
<br />09 68 00 - CARPETING / 09 6813 - TILE CARPETING / 09 6816 - SHEET CARPETING
<br />1. FIRE -TEST -RESPONSE CF-IARACTERISTICS: PROVIDE MATERIALS AND CONSTRUCTION IDENTICAL TO THOSE TESTED IN ASSEMBLY INDICATED
<br />1. SUBMIT SHOP DRAWINGS INDICATING CARPET LOCATIONS, DYE LOT LIMITATIONS, SEAMING PLAN, METHOD OF JOINING SEAMS, DIRECTION OF CARPET IN
<br />-PAINTING AND COATING
<br />00IT
<br />ACCORDING TO ASTM E 119 BYAN INDEPENDENT TESTING AND INSPECTING AGENCY.
<br />EACH ROOM OR AREA, AND TYPE AND LOCATION OT TRANSITION STRIPS. SUBMIT SAMPLES: 12X12 INCH SAMPLES IN EACH COLOR AND PATTERN. SUBMIT
<br />1. SMIT PRODUCT DATA FROM MANUFACTURER FOR PROPOSED USE. INCLUDE PRODUCT DESIGNATION AND GRADE OF EACH PAINT AND COATING
<br />1. SUBM0
<br />SAMPLE CK TRANSITION STRIPS, 4 INCHES LONG IN EACH COLOR
<br />TYPE, SURFACE PREPARATION MATERIALS AND PROCEDURES, AND PRODUCT ANALYSIS AND PERFORMANCE CHARACTERISTICS FOR EACH PAINT AND
<br />2. SOUND TRANSMISSION CHARACTERISTICS: PROVIDE MATERIALS AND CONSTRUCTION IDENTICAL TO THOSE TESTED IN ASSEMBLY INDICATED
<br />COATI NG TYPE.
<br />ACCORDING TO ASTM E 90 AND CLASSIFIED AC CORDING TO ASTM E 413 BY A QUALIFIED INDEPENDENT TESTING AGENCY.
<br />2. SEAMING MATERIALS: AS RECOMMENDED BY CARPET MANUFACTURER ADHESIVE WATERPROOF LATEX BASED CEMENT FORMULATED SPECIFICALLY
<br />:
<br />FOR INSTALLING CARPET, RECOMMENDED BY CARPET MANUFACTURER LEVELING COMPOUNDWHITE, PREMIXED, LATEX BASED.
<br />2. SUBMIT SAMPLES OF 8.9X11" INCH FOR EACH TYPE PAINT SHOWING COLOR AND LUSTER ON REPRESENTATIVE SUBSTRATE. SUBMIT 12X12 INCH
<br />3. GYPSUM WALLBOARD: ASTM C 36, TYPE AND THICKNESS INDICATED.
<br />TEXTURE SAMPLES ON GYPSUM BOARD BACKING.
<br />3. INSTALL CARPET IN ACCORDANCE WITH MANUFACTURERS INSTRUCTIONS AND CRI 104, SECTIONS 8-"DIRECT GLUE -DOWN," 9 "DOUBLE GLUE DOWN,"
<br />4. WATER-RESISTANT GYPSUM BACKNG BOARD: ASTM C 630/C 630M, WITH CORE TYPE AND IN THICKNESS INDICATED.
<br />10- UTILIZING CUSHION," 11-"STRETCH-IN ULIZING TAC KLESS STRIP," FOR SYSTEM INDICATED.
<br />3. PROVIDE 1 GALLON CON MINERS EXTRA STOCK OF EACH COLOR FINISH COAT TO THE C/MVER
<br />5. INTERIOR GALVANIZED METAL TRIM: ASTM C 1047.
<br />4. INSTALL CARPET TILE TO COMPLY WITH MANUFACTURERS INSTRUCTIONS AND C RI 104, SECTION 13, "CARPET MODULES (TILES)."
<br />4. FOR GYPSUM BOARD SURFACES, USE PRODUCT SHERWIN WILLIAMS DURATION HOME INTERIOR ACRYLIC LATEX. NO SUBSTITUTIONS UNLESS
<br />APPROVED BY ARCHITECT.
<br />6. EXTRUDED ALUMINUM TRIM: PROFILES AND DIMENSIONS INDICATED. FRYREGLET OORP.,GORDON, INC., PITTOON INDUSTRIES, OR APPROVED EQUAL.
<br />5, DO NOT THIN PAINT IN EXCESS OF MANUFACTURERS RECOMMENDATIONS.
<br />7. JOINT TREATMENT MATERIALS:
<br />6. APPLY PAINTS AND COATINGS WITHIN MINIMUM DRY FILM THICKNESS RANGE RECOMMENDED BY MANUFACTURER MATCH FINAL COAT OF PAINT TO
<br />a. GENERAL: PROVIDE MATERIALS OOMPLMNG WITH ASTM C 475, ASTM C 840, AND RECOMMENDATIONS OF MANUFACTURER OF BOTH GYPSUM BOARD
<br />AND JOINT TREATMENT MATERIALS FOR THE APPLICATION INDICATED.
<br />09 73 00 - FRP PANELS
<br />APPROVED DOLOR'
<br />b. JOINT TAPE: PAPER REINFORCING TAPE.
<br />PART 1 - GENERAL
<br />7. THE NUMBER OF COATS AND FILM THICKNESS REQUIRED IS THE SAME REGARDLESS OF THE APPLICATION METHOD. DO NOT APPLY SUCCEEDING
<br />c. SETTING -TYPE JOINT CCN�/POUNDS: CHEMICAL-HAF2DENING POWDER
<br />COATS UNTIL THE PREVIOUS COAT HAS CURED AS RECOMMENDED BY THE COATING MANUFACTURER SAND BETWEEN APPLICATIONS WHERE SANDING
<br />d. DRYING -TYPE JOINT COMPOUNDS: VINYL -BASED PRODUCTS.
<br />1.1 RELATED DOCUMENTS
<br />IS REQUIRED TO PRODUCE AN EVEN SMOOTH SURFACE IN ACCORDANCE WITH THE MANUFACTURER'S DIRECTIONS. SAND LIGHTLY BETWEEN EACH
<br />8. NON -LOAD -BEARING STEEL FRAMING INSTALLATION: ASTM C 754, AND ASTM C 840 REQUIREMENTS THAT APPLY TO FRAMING INSTALLATION.
<br />A EXTENT OF FRP PANEL SYSTEM WORK IS INDICATED ON THE DRAWINGS AND IN THE FINISH SPECIFICATIONS ON SHT
<br />SUCCEEDING ENAMEL OR VARNISH COAT.
<br />8. APPLY ADDITIONAL COATS AND BARRIER O OATS WHEN UNDERCOATS, STAINS, OR OTHER CONDITIONS SHOW THROUGH FINAL COAT OF PAINT UNTIL
<br />9. DEFLECTION COMPENSATION: PROVIDE DEFLECTION COMPENSATION AT THE TOP OF PARTITIONS EXTENDING TO STRUCTURE. METE-IOD SHALL
<br />1.3 QUALITYASSURANCE:
<br />PAINT FILM IS OF UNIFORM SHEEN, FINISH, COLOR, AND APPEARANCE. GIVE SPECIAL ATTENTION TO ENSURE THAT SURFACES, INCLUDING EDGES,
<br />COMPLY WITH UBC 1997 SECTION 706, "FIRE -RESISTIVE JOINT SYSTEMS AND SECTION 711, "SHAFT ENCLOSURES," AND UBC STANDARD 7.1, "FIRE TEST
<br />CORNERS, CREVICES, WELDS, AND EXPOSED FASTENERS, RECEIVE A DRY FILM THICKNESS EQUIVALENT TO THAT OF FLAT SURFACES.
<br />PROCEDURES."
<br />A FIRE PERFORMANCE CHARACTERISTICS: PROVIDE FRP PANEL SYSTEM THAT IS IDENTICAL TO THOSE TESTED FOR THE FOLLOWING FIRE
<br />PERFORMANCE CHARACTERISTICS, ACCORDING TO ASTM TEST METHOD INDICATED, BY UL ONE OTHER TESTING AND INSPECTING AGENCY ACCEPTABLE TO
<br />AUTHORITIES HAVI NG JURISDICTION.
<br />9. BEFORE APPLICATION OF FINISH CXZ4TS, APPLY A PRIME COOT OF MATERIAL AS RECOMMENDED BY THE MANUFACTURER TO MATERIAL THAT IS
<br />10. GYPSUM BOARD INSTALLATION: CXNvPLY WITH ASTM C 840 AND GA-216.
<br />REQUIRED TO BE PAINTED OR FINISHED AND HAS NOT BEEN PRIME COATED BY OTHERS. CLEAN AND TOUCH-UP PRIME PAINT WELDS AND OTHER
<br />11. WATER-RESISTANT GYPSUM BACKING BOARD: INSTALL WITH 1/4-INCH (6.4-MM) GAP WHERE PANELS ABUT OTHER CONSTRUCTION OR PENETRATIONS.
<br />B. SURFACE BURNING CHARACTERISTICS: AS FOLLOWS, TESTED PERASTM E 84.
<br />DAMAGED AREAS OF SHOP PRIMED ITEMS.
<br />12. LEVELS OF GYPSUM BOARD FINISH: PROVIDE THE FOLLOWING LEVELS OF GYPSUM BOARD FINISH PER GA-214.
<br />1. FLAME SPREAD: 25 OR LESS.
<br />10. COMPLETELY COVER TO PROVIDE AN OPAQUE, SMOOTH SURFACE OF UNIFORM FINISH, DOLOR, APPEARANCE, AND OOVERAGE. CLOUDINESS,
<br />SPOTTING, HOLIDAYS, LAPS, BRUSH MARKS, RUNS, SAGS, ROPINESS, OR OTHER SURFACE IMPERFECTIONS WILL NOT BE ACCEPTABLE.
<br />a. LEVEL 1 FOR CEILING PLENUM AREAS, CONCEALED AREAS, AND WHERE INDICATED, UNLESS A HIGHER LEVEL OF FINISH IS REQUIRED FOR FIRE-
<br />RESISTIVE-RATEDASSEMBLIES AND SOUND-RATEDASSEMBUES.
<br />2. SMIOKEDEVELOPED: 450ORLESS.
<br />11. PAINT INTERIOR SURFACES OF DUCTS, WHERE VISIBLE THROUGH REGISTERS OR GRILLES, WITHAFLAT, NONSPECULARBLACK PAINT.
<br />b. LEVEL 2 WHERE WATER-RESISTANT GYPSUM BACKING BOARD PANELS FORM SUBSTRATES FOR TILE, AND WHERE INDICATED.
<br />c. LEVEL 4 FOR GYPSUM BOARD SURFACES UNLESS CT IERWISE INDICATED.
<br />1.4 SUBMITTALS:
<br />12. PAINT BACK SIDES OF ACCESS PANELS AND REMOVABLE OR HINGED COVERS TO MATCH EXPOSED SURFACES.
<br />d. LEVEL 5 FOR GYPSUM BOARD SURFACES WHERE INDICATED TO RECEIVE SMOOTH FINISH AND; OR WALL WASH LIGHT FIXTURES.
<br />A MANUFACTURERS DATA: SUBMIT MANUFACTURERS DETAILED MATERIALS AND INSTALLATION SPECIFICATIONS AND OTHER DATA FOR FRP PANEL
<br />13. DRYWALL STIPPLE ENAMEL FINISH: ROLL AND REDISTRIBUTE PAINT TO AN EVEN AND FINE "ORANGE PEEL" TEXTURE. LEAVE NO EVIDENCE OF
<br />SYSTEM.
<br />ROLLING SUCH AS LAPS, IRREGULARITY IN TEXTURE, SKID MARKS, OR OTHER SURFACE IMPERFECTIONS.
<br />09 3000 - TILING
<br />B. SAMPLES: SUBMIT SAMPLE NOT LESS THAN 12" X 12" IN SIZE OF COLOR, GRADE AND FINISH OF FRP PANEL SYSTEM REQUIRED. SAIVPLE TO INCLUDE
<br />1. TILE PRODUCTS: AS INDICATED ON DRAWINGS AND SCHEDULES.
<br />TRIM
<br />14. FINISH EXTERIOR DOORS ON TOPS, BOTTOMS, AND SIDE EDGES SAME AS EXTERIOR FAGS.
<br />2. WATERPROOFING AND CRACK -SUPPRESSION MEMBRANE: MANUFACTURER'S STANDARD PRODUCT THAT COMPLIES WITH ANSI All 18.10; NOBLE
<br />C MA NTENANCE DATA SUBMIT MANUFACTURERS CARE AND MAINTENANCE DATA, INCLUDING REPAIR AND CLEANING INSTRUCTIONS FOR SYNTHETIC
<br />COMPANY (THE); NOBLESEAL TS, CHLORINATED -POLYETHYLENE -SHEET.
<br />MARBLE MATERIAL.
<br />10 26 00 CORNER GUARDS
<br />3. PORTLAND CEMENT MORTAR (THICKSET) INSTALLATION MATERIALS: ANSI A108.1A
<br />1.5 DELIVERY, STORAGE AND HANDLING:
<br />1. PROVIDE PRINTABLE CORNER GUARDS: 0.50 INCH THICK PLASTIC, SURFACE MOUNTED, 3/4" WINGS AS MANUFACTURED BY WALLPROTEX, ST CF-IARLES, IL,
<br />4. DRY -SET PORTLAND CEMENT MORTAR (THI N SET): ANSI A118.1.
<br />A PROTECT FRP PANELS AND ACCESSORY ITEMS FROM DAMAGE DURING LOADING, SHIPMENT, DELIVERY AND STORAGE. USE NON -STAINING MATERIALS
<br />OR APPROVED EQUAL. PROVIDE CORNER GUARDS COMPLETE WTH ADHESIVE TAPE ANCHORS.
<br />FOR BLOCKING AND PACKING. STACK UNITS AT THE SITE IN ACCORDANCE WTH FABRICATORS RECO M11VENDATIONS.
<br />5. LATEX-PORTLAND CEMENT MORTAR (THIN SET): ANSI A118.4.
<br />2. HEIGHT: 48", UNLESS OTHERWISE INDICATED.
<br />PART 2 - PRODUCTS
<br />6. CHEMICAL -RESISTANT, WATER -CLEANABLE, TILE -SETTING AND-GRCUTTNG EPDXY. ANSI A118.3.
<br />3. FINISH SURFACE: ORANGE PEEL TEXTURE, FACTORY TREATED FOR FIELD FINISHING.
<br />2.1 MATERIALS:
<br />7. POLYMER -MODIFIED TILE GROUT: ANSI All 18.7, COLOR AS INDICATED.
<br />A FRP PANEL SYSTEM: GLASLINER FRP
<br />8. ONE -PART, MILDEW -RESISTANT SILICONE: ASTM C 920; TYPE S; GRADE NS; CLASS 25; FORMULATED WITH FUNGICIDE, INTENDED FOR IN-SERVICE
<br />EXPOSURES OF HIGH HUMIDITY AND EXTREME TEMPERATURES.
<br />1. THICKNESS: 0.0901NCT-I.
<br />9. ANSI TILE INSTALLATION STANDARDS: COMPLY WITH PARTS OF ANSI A108 SERIES "SPECIFICATIONS FOR INSTALLATION OF CERAMIC TILE" THATAPPLY TO
<br />2. SURFACE TEXTURE: SMOOTH GEL COAT.
<br />TYPES OF SETTING AND GROUTING MATERIALS AND TO METHODS INDICATED IN CERAMIC TILE INSTALLATION SCHEDULES.
<br />3. WIDTH: 4'-0" WIDE X LONGEST POSSIBLE LENGTH TO ELIMINATE VERTICAL JOINTS.
<br />10. TCA INSTALLATION GUIDELINES: TCNS "HANDBOOK FOR CERAMIC TILE INSTALLATION." COMPLY WITH TCA INSTALLATION METHODS INDICATED IN CERAMIC
<br />TILE INSTALLATION SCHEDULES.
<br />4. FIRE RESISTANCE: CRASS C.
<br />5. COLOR: SELECTED BY ARCHITECT
<br />09 5100 - ACOUSTICAL CEILINGS
<br />B. SEALANTS: PROVIDE TYPES AS RECOMMENDED BY THE MANUFACTURER OF FRP PANELS. MUST BE VOC COMPLIANT AND LESS THAN 250 G/L. COLOR
<br />1. PANELS AND SUSPENSION SYSTEMS: SEE FINISH LEGEND AND SCHEDULE FOR PRODUCT SELECTIONS, COLORS, AND LOCATIONS.
<br />TO MATCH PANELS, PROVIDE BETWEEN PANELS, UNLESS OTHERWISE INDICATED.
<br />2. INSTALL ACOUSTICAL PANEL CEILINGS TO COMPLY WITH ASTM C 636 REQUIREMENTS, MANUFACTURERS WRITTEN INSTRUCTIONS, AND OISCAS "CEILING
<br />C. ATTACHMENT DEVICES: PROVIDE TYPE AS RECOMMENDED BY THE FRP PANEL MANUFACTURER AND AS REQUIRED TO SUIT WALL CONSTRUCTION TO
<br />SYSTEMS HANDBOOK"
<br />WHICH THE PANELS ARE TO BE APPLIED. EXPOSED NYLON RIVIT FASTENERS SHALL MATCH COLON OF PANELS SELECTED.
<br />D. TRIM: PROVIDE PANELING COMPLETE WITH TRIM FOR INSIDE AND OUTSIDE CORNERS AND TOP CAPPING STRIPS AND DIVIDER BARS.
<br />09 6513 -RESILIENT BASE AND ACCESSORIES
<br />PART 3 - DRCUTION
<br />1. RESILIENT BASE STANDARD: ASTM F 1861.
<br />A MATERIAL REQUIREMENT: TYPE TV
<br />B. MANUFACTURING METHOD: GROUP 1
<br />3.1 INSTALLATION:
<br />C. STYLE: STANDARD TOP SET COVE
<br />A INSTALL SYSTEM IN ACCORDANCE WITH FRP MANUFACTURER'S INSTRUCTIONS.
<br />2. MINIMUM THICKNESS: 1/8"
<br />B. PANELS SHALL BE INSTALLED PLUMB, LEVEL, TRUE TO LINE, AND INCORRECT RELAIICNNSHIP TO ADJACENT VVtORK UNLESS OTHERWISE APPROVED BY
<br />THE ARCHITECT, HORIZONTAL JOINTS BETWEEN PANELS SHALL NOT BE ACCEPTABLE.
<br />3. HEIGHT: 4"
<br />C. VERTICAL SEAMS SHALL BE SEALED TO MATCH PANEL COLOR, USE OF TRIM SHALL NOT BE PERMITTED.
<br />4. FINISH: MATTE
<br />C. PROTECT SURFACES FROM DAMAGE. REPLACE DAMAGED 1IVORK.
<br />5. INSTALLATION MATERIALS
<br />A TROWELABLE LEVELING AND PATCHING COMPOUNDS: LATEX -MODIFIED, PORTLAND CEMENT BASED OR BLENDED HYDRAULIC -CEMENT -BASED
<br />FOKMIULATION PROVIDED OR APPROVED 13Y MANUFACTURER FCKAPPLIC:ATIONNS INDICATED.
<br />END CN SECTION 097300
<br />B. ADHESIVES: WATER-RESISTANT TYPE RECOMMENDED BY MANUFACTURER TO SUIT RESILIENT PRODUCTS AND SUBSTRATE CONDITIONS INDICATED.
<br />6. RESILIENT BASE INSTALLATION
<br />A COMPLY WITH MANUFACTURERS WRITTEN INSTRUCTIONS FOR INSTALLING RESILIENT BASE.
<br />B. APPLY RESILIENT BASE TO WALLS, COLUMNS, UMN.S, PILASTERS, CASEWORK AND CABINETS IN TOE SPACES, AND OTHER PERMANENT FIXTURES IN ROOMS
<br />AND AREAS WHERE BASE IS REQUIRED.
<br />C. INSTALL RESILIENT BASE IN LENGTHS AS LONG AS PRACTICABLE WITHOUT GAPS AT SEAMS AND WITH TOPS OF ADJACENT PIECES ALIGNED.
<br />D. TIGHTLY ADHERE RESILIENT BASE TO SUBSTRATE THROUGHOUT LENGTH OF EACH PIECE, WITH BASE IN CONTINUOUS CONTACT WITH HORIZONTAL AND
<br />VERTICAL SUBSTRATES.
<br />E. DO NOT STRETCH RESILIENT BASE DURING INSTALLATION.
<br />09 6516 -RESILIENT SHEET FLOORING
<br />1. RESILIENT SHEET FLOCKING OOMPLIES WITH FLOORSOORE STANDARD.
<br />2. LO W-VOCADHESIVE
<br />3. ADHESIVE ARE LOVV EMITTING FOR LEED
<br />4. SEAMING METHOD: STANDARD
<br />5. INSTALLATION MATERIALS:
<br />A TROIVELABLE LEVELING AND PATCHING COK/POIJNDS.
<br />B. ADHESIVES.
<br />C. SEAMLESS.INSTALLATIONAOCESSORIES.
<br />09 6519 -RESILIENT TILE FLOORING
<br />1.1 PRODUCTS
<br />A GENERAL:
<br />1. RESILIENT TILE FLOORING COMPLIES WITH FLOORSCORE STANDARD.
<br />2. LOW-VOC ADHESIVE AND SEALANT.
<br />B. VINYL COMPOSITION FLOOR TILE:
<br />1. SIZE: 12 BY 12 INCHES (305 BY 305 NM.
<br />C. INSTALLATION MATERIALS:
<br />1. TROWELABLE LEVELING AND PATCHING COMPOUNDS.
<br />2. ADHESIVES.
<br />3. SEA\/LESS-INSTALLATIONNACCESSC)PJES.
<br />4. FLOOR POLISH.
<br />1.2 FLOORTIL E INSTALLATION
<br />A LAY TILES SQUARE WITH ROOM AXIS
<br />B. FOR STATIC DISSIPATIVE TILE, GROUND CROPPER PER MFR RECOMMENDATIONS
<br />Project
<br />H UMANA- ZEPHYRH I LLS,
<br />FLORIDA - GUIDANCE
<br />CENTER
<br />7920 GALL BLVD.
<br />ZEPHYRHILLS, FLORIDA 33541
<br />Prepared for
<br />HUMANA INC.
<br />Contract No: 12.01622.00
<br />H IC'i
<br />One Tampa City Center, Suite 1800
<br />Tampa, FL 33602 USA
<br />t +1 813 229 0300 f +1 813 223 7116
<br />FL Reg: AAC001139
<br />All reproduction & intellectual property rights reserved © 2012
<br />-In Association with
<br />SDM Consulting Engineers
<br />MEP Engineer
<br />135 Almeria Ave.
<br />Coral Cables, FL 33134
<br />305.446.2788
<br />Key Plan
<br />Professional Seals
<br />Jonathan Rae License # AR0094342
<br />Drawn by Author Reviewed by Checker
<br />Project No 12.01622.00
<br />Sheet Title:
<br />OUTLINE SPEC.
<br />Original drawing is 36 x 24 Do not scale contents of this drawing
<br />Sheet Number
<br />
|