|
A
<br />L; te r tid- -mml 1 0 num i e le d CH
<br />A�%&
<br />S"Fecifica-Ition Sheelf,
<br />loft
<br />" 2" 0 2`- 6
<br />1. PRODUCT NAME
<br />CertainTeed Fiber Glass Insulation for
<br />Metal Building Insulation 202-96
<br />2. MANUFACTURER
<br />CertainTeed Corporation
<br />P.O. Box 860
<br />Valley Forge, PA 19482-0105
<br />Phone: (610) 341-7000
<br />k800) 233-8990
<br />Fax: (610) 341-7571
<br />Fax -On -Demand: (800'. 947-0057
<br />vVebsite: www.certainteed.com
<br />3. PRODUCT DESCRIPTION
<br />Basic Use: CertainTeed Fiber Glass
<br />I,Aetal Building Insulation 202-96 is a
<br />flexible blanket insulation furnished in
<br />rolls and intended to be laminated on
<br />one side with a suitable vapor retarder.
<br />it is used as' a thermal and acoustical
<br />insulation in the roofs and sidewalls of
<br />pre-engineered metal buildings and
<br />post frame Construction.
<br />Benefits. Metal Building Insulation
<br />reduces transmission of exterior sound
<br />to the interior of the building and
<br />absorbs reverberating sounds within
<br />the building.
<br />Composhion and Materials: Com-
<br />posed of inorganic glass fibers bond-
<br />ed with a thermoset resin to form a
<br />uniformly textured yellow blanket
<br />insulation.
<br />Limitations. T11his product is designed
<br />for use in interior (weather protected)
<br />walls and roofit, of pre-engineered metal
<br />buildings. It should be laminated on a
<br />first -in, first -out basis and should be
<br />kept dry at all times during processing
<br />0
<br />and end use. After lamination, packag-
<br />ing should not exceed a 5.51 cum-
<br />pression ratio. For additional informa-
<br />tion, please refer to the appendix of the
<br />NAIMA 202-96 (Rev. 20b01 standard.
<br />Sizes: Standard available sizes as
<br />noted in the table on the back.
<br />Contact CertainTeed for non-stan-
<br />clard sizes,
<br />4. TECHNICAL DATA
<br />Applicah?e Standards:
<br />• Model Building Codes:
<br />— ICC
<br />• Material Standards:
<br />— ASTM C991 Type I
<br />— NAIMA 202-46 (Rev. 20W)
<br />Fire Reskance:
<br />• Fire Hazard Classification:
<br />— UL 723, ASTM E84, NIFPA 255
<br />Max. Flarrie Spread Index: 25
<br />Max. Smoke Developed Index: 50
<br />— CAN/ULC-S1 02-M88
<br />THERMAL PERFORMANCE
<br />Nominal Thicknm
<br />R-Value
<br />Prior to Laminating
<br />Non-combustible:
<br />— ASTM El 36
<br />Meets requirements
<br />PhysicaflCheinical Properties:
<br />in.
<br />mrn
<br />R
<br />RSI
<br />3 Vis
<br />86
<br />10
<br />1.76
<br />33/4
<br />95
<br />11
<br />1.94
<br />131
<br />4-3/r;
<br />I I 1
<br />2,29
<br />Thermal Resistance:
<br />ASTM C3 18 and/or ASTM C1 77
<br />at 75F (24*0 mean temperature.
<br />51A
<br />133
<br />16
<br />2.82
<br />6�M
<br />162
<br />SOUND TRANSMISSION
<br />Construclion Type
<br />TransmiWon. Los in d8 at the Cic e Frequencies
<br />STC
<br />125
<br />1 250
<br />500
<br />1000
<br />2000
<br />4000
<br />R!Iing
<br />No Insulation
<br />1��
<br />19
<br />24
<br />10
<br />12
<br />24
<br />R-10 Faced 202-96 Insulation
<br />12
<br />16
<br />26
<br />37
<br />45
<br />49
<br />29
<br />Over the Purlins
<br />o
<br />R- 19 Faced 202-96 Insulation
<br />13
<br />20
<br />30
<br />41,
<br />49
<br />51
<br />32
<br />?e
<br />over the Forlins
<br />202-96 insulation Over
<br />& 80tWeCTI the PUFlin5 to Fill
<br />14
<br />24
<br />34
<br />44
<br />53
<br />56
<br />36
<br />tl�e Cavity (R-25 Combined)
<br />No Insulation
<br />12
<br />14
<br />119
<br />i 9
<br />20
<br />27
<br />21
<br />R-10 Faced 202-96 insulation
<br />13
<br />16
<br />25
<br />32
<br />37
<br />46
<br />28
<br />Ove the Girts
<br />R-13 Faced 202-96 Insulation
<br />13
<br />17
<br />26
<br />33
<br />38
<br />47
<br />29
<br />Over the Girts
<br />z
<br />R-!3 Faced 202-1)6 Insulation
<br />Over the Girts 3�1s"Steel Studs
<br />26
<br />40
<br />5 1
<br />61)
<br />64
<br />61
<br />511
<br />on 24" Centers with J�?" Gy
<br />1 p
<br />Board on interior.
<br />P-1 3 Faced 202-,36 Unsulation.
<br />Over the G irts 3 5/�3r, Steel Studs
<br />on 24" Centers with R-1 I Batts
<br />31 1 43 55 68 73 75
<br />54
<br />& lh' Gyp. Board on Interior.
<br />[Sound
<br />Transmission Class (STC) in accordance ASTM E90
<br />.- Pocf consiruction is 24ga.
<br />standing searn roof with 8�'Z purlins or) 5' centers
<br />- W all Construction is 26ga. wall panels screwed to 6' Z girts placed on 7' centers
<br />I
<br />interior metal furring wall studs were 3%' by 25ga. on 24' centers
<br />• Acoustical Performance:
<br />— See the tables on front and below.
<br />• Water Vapor Sorption:
<br />— (ASTM C1 104)
<br />No greater than 5.0% by weight.
<br />• Corrosiveness.
<br />— (ASTM C665)
<br />Meets requirements for steel,
<br />copper and aluminum.
<br />• Odor Emission:
<br />— (ASTM (2-1304)
<br />Fass
<br />• Fungi Resistance-
<br />- (ASTM C1 104)
<br />Nss Test
<br />Qudity Assurance: Certa-InTeed wis
<br />the first fiber glass insulation manufac-
<br />turer to have its manufacturing plant,
<br />R & D center and corporate headquar-
<br />ters registered to ISO 9001-2000
<br />standards.
<br />MINA 2-02 6 SW�W-
<br />ft
<br />5. INSTALLATION
<br />The vapor retarder on Metal Building
<br />Insulation 202-96 should be installed
<br />towards the conditioned spaces in the
<br />building. The insulation is normally
<br />applied over or between the structural
<br />members of the building and held in
<br />place by the covering sheets or insula-
<br />tion support system. When using high
<br />R-value systems, it is recommended
<br />that the cavity betvveen the exterior
<br />metal sheet and the faced fiber glass
<br />insulation should be completely filled.
<br />6. AVAILABILITY AND COST
<br />Manufactured and sold throughout the
<br />United States and Canada. For avail-
<br />ability and cost, contact your local
<br />distri6or or calf CertainTeed Sales
<br />Support Group in Valley Forge, PA, at
<br />�800) 233-8990.
<br />7. WARRANTY
<br />Inasmuch as CertainTeed has no con-
<br />trol over installation design, instal attion
<br />workmanship, accessory materials, or
<br />conditions of applications, Certaidl�eed
<br />does not warrant the performance or
<br />results of any installation containing its
<br />products.
<br />8. MAINTENANCE
<br />An inspection and preventative main-
<br />tenance program for the insulation and
<br />vapor retarder system is recommended
<br />to ensure optimum performance.
<br />9. TECHNICAL SERVICES
<br />Technical assistance can be obtained
<br />either from, the local CertainTeed
<br />sal�s ri��presentative, or by calling
<br />CertainTeed Sales Support Group in
<br />Valley Forge, PA, (800) 233-8990.
<br />10. FILING SYSTEMS
<br />- CertainTeed Pub. No. 30-25-031
<br />ii Additional product information
<br />ava e upon reque t.
<br />SOUND ABSORPTION — UNFACED
<br />Absorption Coefficients & octave Band Frequencies (Hz)
<br />Nom, Thickness
<br />1
<br />250
<br />Soo
<br />100D
<br />2000
<br />4000
<br />NRC
<br />—i
<br />-n-
<br />---
<br />;—m
<br />10
<br />3,&
<br />86
<br />�-q
<br />OM
<br />1.02
<br />0.94
<br />-7.
<br />0-96
<br />_� _93
<br />0.98
<br />0-95
<br />11
<br />33/4
<br />95
<br />0.39
<br />om
<br />775, —
<br />9_2
<br />0.95
<br />13
<br />ft0_
<br />0.53
<br />0,97
<br />1.1014
<br />0_901
<br />0.95
<br />0.95
<br />16
<br />51)
<br />133
<br />0.67
<br />1.05
<br />1_021
<br />0192
<br />98
<br />0.98
<br />M9
<br />1.00
<br />19
<br />119
<br />6,
<br />63M
<br />q
<br />�162
<br />'62
<br />0,89
<br />1
<br />1.0 -
<br />1 Olt
<br />05
<br />—
<br />Sournd absorption tested in accordancewith ASTNAC423 using Type A mounting per ASTNII E795�
<br />P_
<br />Nominal
<br />Thickness
<br />AVAILABLE SIZES
<br />Widths
<br />Lengths
<br />value
<br />in.
<br />mm
<br />in.
<br />in
<br />—
<br />10
<br />_77.
<br />E36E,48E,60, 77H,2�914,
<br />�1219, 1524, 1829
<br />too
<br />3015
<br />—9!;
<br />3 6, 43, 60, 72
<br />1 914, 1219, 1524, 1829
<br />1510
<br />30�5
<br />13
<br />41M
<br />—711
<br />36, 48, 60, 72
<br />914, 1219,11524,1829
<br />75
<br />22.9
<br />16
<br />51,14
<br />133
<br />36, 48, 60, 72
<br />1 914, 1219, 1524� 1829
<br />50
<br />152
<br />19
<br />6 3/
<br />162
<br />�203
<br />3 1::
<br />4,1829
<br />50
<br />15.2
<br />8
<br />1
<br />1 3 6, 41,_60, 72
<br />9144, 1219,15,24, 1829
<br />___L
<br />Non-standard widths are available and 5Lblect to an upcharge on an individual basis determined by
<br />manufacturer's capability, quantity, lead times and packaging availability. IR-25is made to order.
<br />ISO
<br />NAIMA
<br />ASK ABOUT OUR OTHER CERTAINTEED PRODUCTS AND SYSTEMS:
<br />EXTERIOR: ROOFING - SIDING - WINDOWS - FENCE - RAILING - TRIM DECKING FOUNDATIONS PIPE
<br />INTERIOR: INSULATION - WALLS - CEILINGS
<br />CertainTeed Corporation Professional: 800-233-8990
<br />PO, Box 860 Consurner: 800-782-8777
<br />Valley F-orge7 PA 19482 wwwcertaintecd.com
<br />Q 9/07 (�,,airTeej co�,(, ',on, Pn
<br />. rted in USA
<br />Code: 30-2-1-1)(13 Mnal Building Insulation
<br />FACING COMPOSITION
<br />DESCRIPTION
<br />VALUES (ENGLISH)
<br />VALUES (METRIC)
<br />White Film
<br />Polypropylene
<br />0.0015 inch
<br />38.1 micron
<br />Adhesive
<br />Flame Resistant
<br />Reinforcing
<br />Tri-directional
<br />5 / inch (MD)
<br />20 / 100 mm (MD)
<br />Fiberglass/Polyester
<br />4 / inch (XD)
<br />16 / 1 OG mm (XD)
<br />Kraft
<br />Natural
<br />I I lbs i 3000 ft2
<br />18 g / M2
<br />PHYSICAL PROPERTIES
<br />TEST METHOD
<br />VALUES (ENGLISH)
<br />VALUES (METRIC)
<br />Basis Weight
<br />Scale
<br />17 lbs / 1000 ft'
<br />83g/ml
<br />Permearce (WJTR)
<br />ASTM E96
<br />0.09 parm
<br />5.17 ng / N's
<br />Procedure A
<br />(grains/hr,ft2in Hg)
<br />Bursting Strength
<br />ASTM D774
<br />60 psi
<br />4.2 kg I CM2
<br />Puncture Resistance
<br />ASTM C 1136
<br />125 beach units
<br />3,7 Joules
<br />Tensile Strength
<br />ASTM C1 136
<br />40 lbs/inch width (MD)
<br />7,0 kN I rn (MD)
<br />30 lbs/inch width (XD)
<br />5.3 kN / m (XD)
<br />Caliper / Thickness
<br />Micrometer
<br />0.008 inch
<br />203 micron
<br />Accelerated Aging
<br />30 Days @
<br />No Corrosion
<br />No Corrosion
<br />95% RH, 120-F (49-C)
<br />No Delamination
<br />No Delamination
<br />Low Temperature Resistance
<br />ASTM D1790
<br />Remains Flexible
<br />Remains Flexible
<br />-40-F (-40-C)
<br />No Delamination
<br />No Delamination
<br />High Temperature Resistance
<br />4 hours @
<br />Remains Flexible
<br />Remains Flexible
<br />240-F (11 16-C)
<br />No Delamination
<br />No Delamination
<br />Water Immersion
<br />24 hours @ 73'F (23'C)
<br />No Delamination
<br />No Delamination
<br />Moid Resistance
<br />ASTM C6651 C1338
<br />No Growth
<br />No Growth
<br />Dimensional Stability
<br />ASTIM D1204
<br />025%
<br />0.25%
<br />Light Reflectance
<br />ASTM C523
<br />85%
<br />85% 1
<br />FIRE TESTING
<br /><::@>
<br />AST M E84 / UL 723
<br />CAN ULC-SI02M
<br />BS 476
<br />APPRINED
<br />Film Side Kraft Side
<br />Film Side Kraft Side
<br />class
<br />Flame Spread
<br />10 15
<br />15 15
<br />0
<br />Smoke Developed
<br />10 5
<br />30 45
<br />Surface
<br />Physical Properties based upon statistical averages, Welgint I I nimlless +/- 1 U1113
<br />"LAMTEC" AND "WMP" ARE REGISTERED TRADEMARK$ OF LAMTEC CORPORATION
<br />501ORiverRoad Mount Bethel, Pennsylvania 18343-5610, U3.&
<br />Phone: (570) 897-8200 Fax: (570) 897-6081 Web: www.lamtec.com
<br />8/10
<br />R. S. HANLEY
<br />DIESIGN SIERVICr=5 INC:,
<br />MOE31LE/ OFFIC-FE a52-20ro-Ee2l
<br />OFFIC;r= FAX 352-508-2342
<br />F 0 f5OX 1325 SAN ANTONIO
<br />FLA, 3351ro
<br />EMAIL. ha,nIeSOro-aembarqmaTI.com
<br />
|