|
No.U41
<br />Design No. U465
<br />Design
<br />DIME N610N PLAN NOTES
<br />cpt'- 27
<br />September
<br />September 27, 2005
<br />Nonbearing Wall Rating - I HR.
<br />N.nbein g
<br />1/2 " GYPSUM
<br />1. THIS PLAIN 15 FOR DIMENSIONAL PURPOSES ONLY
<br />1v P
<br />J_•
<br />WALLBOARD
<br />METAL STUDS
<br />DOOR AT I& O.C.
<br />—RO OF DECK
<br />2. FOR DIMENSIONING PURPOSE5, METAL STUD WALL5 ARE DRAWN AT
<br />4" OR (o" LUIDE U.N.O. - 5LOCK WALLS ARE DRAWN AT 0" WIDE U.N.O.
<br />3. 5" BLOC WA L AND 6" ME T [) ALL ARE DIMEN51ONED TO
<br />FACE OF WALL 4" METAL STUD WALLS ARE DIMENSIONED TO
<br />CENTER OF WALL, U.N.O.
<br />(15N
<br />1. Floor and Ceiling Runners - (not shown) - Channel shaped runners, 3-5/8 in. wide (min), 1-1/4 in.
<br />legs, formed from min No. 25 MSG galv steel, attached to floor and ceiling with fasteners spaced 24
<br />------ -
<br />L
<br />-----------
<br />EXTEND WALL To UNDERSIDE OF
<br />ROOF DECK PER J.L. DESIGN U.4&5
<br />10'-411 1. 5'-411 2---1-1 12'-2"
<br />4. GENERAL CONTRACTOR TO NOTIFY ARCHITECT AFTER LAYOUT IS
<br />COMPLETE AND WALL TRACK 15 IN PLACE PRIOR TO FRAMING ANY
<br />WALLS
<br />in. OC max.
<br />2. Steel Studs - Channel shaped, 3-5/8 in. wide (min), 1-1/4 in. legs, 3/8 in. folded back returns, formed
<br />from min No. 25 MSG galv steel spaced 24 in. OC max.
<br />3. Batts and Blankets* - (Optional) - Mineral wool or glass fiber batts partially or completely filling
<br />stud cavity.
<br />See Batts and Blankets (BZJZ) category for names of Classified companies.
<br />I F
<br />STEEL CHANNEL
<br />5. GENERAL CONTRACTOR TO NOTIFY ARCHITECT OF ANY
<br />DI5C_fREf=,4NC;1E5 PRIOR TO WITH ANY WORK
<br />3A. Fiber, Sprayed* - As an alternate to Batts and Blankets (Item 3) - Spray applied cellulose material.
<br />The fiber is applied with water to completely fill the enclosed cavity in accordance with the application
<br />L_ _J
<br />JAMB ANCHOR
<br />oil
<br />instructions supplied with the product. Nominal dry density of 3.0 lb/ft3. Alternate application method:
<br />The fiber is applied with U.S. Greenfiber LLC Type AD 100 hot melt adhesive at a nominal ratio of
<br />one part adhesive to 6.6 parts fiber to completely fill the enclosed cavity in accordance with the
<br />one
<br />application instructions supplied with the product. Nominal dry density of 2.5 lb/ft3.
<br />U S GREEN FIBER L L C - Cocoon2 Stabilized or Cocoon-FRM. (Fire Rated Material)
<br />3B. Fiber, Sprayed* - As an alternate to Batts and Blankets (Item 3) and Item 3A - Spray applied
<br />cellulose insulation material. The fiber is applied with water to interior surfaces in accordance with the
<br />2 x 4 WOOD BUCK
<br />SEALANT
<br />HOLLOW METAL
<br />DOOR FRAME
<br />A
<br />/f,J
<br />x'/
<br />-1-1y
<br />— - - --—
<br />_4_ I
<br />application instructions supplied with the product. Applied to completely fill the enclosed cavity.
<br />N,
<br />Minimum dry density of 4.3 pounds per cubic ft.
<br />NU -WOOL CO INC - Cellulose Insulation
<br />nF- — — —
<br />4. Gypsum Board* - 5/8 in. thick, 4 ft wide, attached to steel studs and floor and ceiling track with I in.
<br />it
<br />long, Type S steel screws spaced 8 in. OC. along edges of board and 12 in. OC in the field of the
<br />board. Joints oriented vertically and staggered on opposite sides of the assembly. When attached to
<br />item 6 (resilient channels) or 6A (furring channels), wallboard is screw attached to furring channels
<br />with I in. long, Type S steel screws spaced 12 in. OC.
<br />AMERICAN GYPSUM CO - Types AG-C, AGX-1
<br />BEIJING NEW BUILDING MATERIALS PUBLIC
<br />LTD CO - Type DBX- 1.
<br />BPB AMERICA INC - Types 1, EGRG, ProRoe Type X, ProRoc Type C.
<br />BPB CANADA INC - ProRoc Type C, ProRoc Type X or ProRoc Type Abuse -Resistant.
<br />CANADIAN GYPSUM COMPANY - Types AR, C, IP-AR, IP-XI, 1P-X2, IPC-AR, SCX, SHX,
<br />WRC or WRX.
<br />G-P GYPSUM CORP, SUB OF
<br />GEORGIA-PACIFIC CORP -Types 5,9, C, DAP, DD', DA, DGG, DS, GPFS6.
<br />LAY -IN ACOUSTICAL
<br />OR GYPSUM BOARD
<br />CEILING.
<br />--FSEE UL DESIGN NO. U465
<br />1
<br />5PREAKROOM 'U'L
<br />112
<br />OFFICE X9
<br />--------- J — - — - — -
<br />INTERIOR HEAD JAM5 DETAIL
<br />SCALE: 3" 1'-0"
<br />LAFARGE NORTH AMERICA INC - Types LGFC2, LGFC2A, LGFC6, LGFC6A, LGFC-C,
<br />LGFC-C/A.
<br />NATIONAL GYPSUM CO - Types FSK, FSK-C, FSK-G, FSW-C, FSW-G, FSW, FSW-3, FSW-5.
<br />PABCO BUILDING PRODUCTS L L C, DBA
<br />PABCO GYPSUM - Type PG-C or PG-9.
<br />PANEL REY S A - Type PRX.
<br />SIAM GYPSUM INDUSTRY (SARABURI) CO LTD - Type EX- I
<br />STANDARD GYPSUM L L C - Types FRX-6, VPBX-6, FRWRX-6, SHTGX-6, FRX-6 Exterior
<br />Gypsum Soffit Board, SG-C.
<br />TEMPLE -INLAND FOREST PRODUCTS CORP - Type X, Veneer Plaster Base - Type X, Water
<br />7
<br />IR-11 BLANKET INSULATION AT
<br />SOUND PROOF PARTITIONS ONLY.
<br />0
<br />(Z
<br />I
<br />TOI�Ef',
<br />r
<br />I Irb
<br />�
<br />EXAM
<br />all
<br />Rated -Type X, Sheathing -Type X, Soffit -Type X, TG-C.
<br />UNITED STATES GYPSUM CO - Type AR, C, FRX-,G, IP-AR, IP-XI, IP-X2, IPC-AR, SCX, SHX,
<br />WRC or WRX.
<br />USG MEXICO S A DE C V - Type AR, C, IP-AR, IP-XI, IP-X2, IPC-AR, SCX, SHX, WRC or
<br />3 5/&" OR 6" (SEE FLOOR PLAN)
<br />GALV. STEEL STUDS AT 16" O.C, 20
<br />GA.STUDS AT WALL MOUNTED
<br />Elf
<br />FT
<br />WRX.
<br />4A. Gypsum Board* - (As alternate to Item 4) - Nom 5/8 in. thick gypsum panels with beveled, square
<br />or tapered edges, applied vertically or horizontally. Vertical joints centered over studs and staggered
<br />one stud cavity on opposite sides of studs. Horizontal edge joints and horizontal buttjoints on opposite
<br />sides of studs need not be staggered or backed. Panels attached to steel studs and floor runner with I in.
<br />long Type S steel screws spaced 8 in. OC when applied horizontally, or 8 in. OC along vertical and
<br />bottom edges and 12 in. OC in the field when panels are applied vertically.
<br />CANADIAN GYPSUM COMPANY - Types AR, C, 1P-AR, 1P-XI, IP-X2, IPC-AR, SCX, SHX,
<br />WRC or WRX.
<br />EQUIPMENT
<br />25 GA. GALV. STEEL CHANNEL
<br />FASTEN TO SLAB AT 24" O.C.
<br />FLOOR SLAB
<br />0
<br />OFFICE
<br />7!
<br />;t
<br />CL.
<br />108 EXAM
<br />UNITED STATES GYPSUM CO - T ype AR, C, FRX-G, IP-AR, IP-XI, IP-X2, IPC-AR, SCX, SHX,
<br />10-11
<br />WRC or WRX.
<br />L -------------------- i
<br />USG MEXICO S A DE C V - Type AR, C, IP-AR, IP-XI, IP-X2, IPC-AR, SCX, SHX, WRC or
<br />WRX.
<br />4B. Gypsum Board* - (As an alternate to Items 4 or 4A) - Nom 3/4 in. thick, 4 ft wide, installed as
<br />-211 5'-4" 10'-2"
<br />described in Item 4A with screw length increased to 1-1/4 in.
<br />CANADIAN GYPSUM COMPANY - Types AR, 1P-AR.
<br />UNITED STATES GYPSUM CO - Types AR, IP-AR.
<br />USG MEXICO S A DE C V - Types AR, IP-AR_
<br />5. Joint Tape and Compound - Vinyl, dry or premixed joint compound, applied in two coats to joints
<br />EXAM -------------------
<br />118
<br />NOT USED
<br />TYP. OW-1-11Z FIRS RATED PARTITION
<br />and screw heads; paper tape, 2 in. wide, embedded in first layer of compound over all joints. As an
<br />alternate, nominal 3/32 in. thick gypsum veneer plaster may be applied to the entire surface ofO
<br />Classified veneer baseboard. Joints reinforced.
<br />SCALE: 3" 1'-0"
<br />SCALE: 1 1/2" 1'-011
<br />6. Resilient Channel - (Optional -Not Shown) - 25 MSG galv steel resilient channels spaced vertically
<br />max 24 in. OC, flange portion attached to each intersecting stud with 1/2 in. long typo S-12 panhead
<br />steel screws.
<br />6A. Steel Framing Members (Not Shown)* - As an alternate to Item 3, furring channels and resilient
<br />sound isolation clip as described below;
<br />NUIP.5E
<br />STATION 31-2,
<br />&d J —
<br />10(0
<br />c000000CO
<br />oc0000l
<br />......o.00000l
<br />l0000000000002
<br />o...
<br />1.o.o.o.000.o.1
<br />.......
<br />loo.o.o.o.%0-1
<br />a. Furring Channels - Formed of No. 25 MSG galv steel, 2-3/8 in. wide by 7/8 in. deep, spaced 24 in.
<br />OC perpendicular to studs. Channels secured to studs as described in Item b. Ends of adjoining
<br />channels are overlapped 6 in. and tied together with double strand of No. 18 SWG galv steel wire near
<br />each end of overlap. As an alternate, ends of adjoining channels may be overlapped 6 in. and secured
<br />together with two self -tapping #6 framing screws, min. 7/16 in. long at the midpoint of the overlap,
<br />with one screw on each flange of the channel.
<br />b. Steel Framing Members* - Used to attach furring channels (Item a) to studs (Item 1). Clips spaced
<br />48 in. OC., and secured to studs with 1-5/8 in. wafer or hex head Type S steel screw through the center
<br />grommet, Furring channels are friction fitted into clips.
<br />PAC INTERNATIONAL INC - Type RSIC-I.
<br />*Bearing the UL Classification Mark
<br />20 GA. STEEL CHANNEL
<br />FASTEN TO STRUCTURE
<br />ABOVE
<br />3 5/8" 25 GA.
<br />GALV, STEEL
<br />STUDS AT &'-V
<br />O.C.
<br />Q
<br />•— I EXAM ------------
<br />IIC5 105
<br />— - — - — -
<br />EXAM
<br />103
<br />104
<br />0
<br />UL DESICOX"N" NO. U465
<br />SCALE: 3" V-0"
<br />12 x 12" S.S. PASS THRU
<br />SPECIMEN CABINET
<br />"505RICK 5-505"
<br />L
<br />EXAM
<br />121
<br />3 5/5" METAL STUD
<br />FRAMING AT I(011 O.C.
<br />FIRE BLOCKING AS PER F15C "III
<br />F _i�9 ------
<br />LA I
<br />IC
<br />1/2 G.W.B.
<br />L LAY -IN ACOUSTICAL
<br />OR GYPSUM 50AFRP
<br />CE IL ING.
<br />---------
<br />RECEPTION
<br />TOILET)) I 1 102
<br />122
<br />—I I I L___j
<br />4; 11
<br />P4%-TW1FJJ CADINEET DETAIL
<br />SCALE: 1 1/2" 1'-0"
<br />1/2" x 46" WIDE G.W.B. APPLIED
<br />HORIZONTALLY OR VERTICALLY,
<br />CORNER JOINTS OVER STUDS,
<br />0000000
<br />000.00000.o.o,
<br />I ... —.1
<br />l000c000000000,
<br />0000000
<br />STAGGER 16" O.C. OPPOSITE SIDES.
<br />ATTACH TO STUDS AND RUNNERS
<br />WITH I" LONG TYPE "5" SCREWS AT
<br />1
<br />e_ W-21' 4'-4
<br />THE JOINTS 4 RUNNER CHANNELS
<br />oc0000.
<br />000.o.o.o.o.o-
<br />1/2" TO 3/4" FROM EDGES OF G.W.B.
<br />SCREWS SHALL BE SPACED 63" O.C.
<br />ALONG EDGES OF BOARD AND 1211
<br />O.C. IN THE FIELD, COVER - JOINTS
<br />%ocoocooccoo.
<br />%0000000c000,
<br />0000000
<br />o...
<br />WAITW.2 Li
<br />101
<br />WITH TAPE AND JOINT COMPOUND
<br />PER GA - WP - 1200. INCREASE
<br />METAL STUD THICKNE55 AS
<br />301-51,
<br />REQUIRED FOR PLUMBING AND
<br />ELECTRICAL.
<br />FIRE BLOCKING AS PER FBC -111
<br />3 5/8" OR 6" (SEE FLOOR PLAN)
<br />GALV. STEEL STUDS AT 1611 O.C, 20
<br />GA.STUPS AT WALL MOUNTED
<br />EQUIPMENT
<br />R-11 BLANKET INSULATION AT
<br />SOUND PROOF PARTITIONS ONLY.
<br />25 GA. GALV. STEEL CHANNEL
<br />FASTEN TO SLAB AT 24" O.C.
<br />FLOOR SLAB
<br />OINTERIOR
<br />UALL PARTITION (TYP.)
<br />(DI
<br />OIMENSIOCNIEP
<br />FLOOR
<br />PLAN
<br />SCALE: 1 1/2" a P-01'
<br />SCALE:
<br />3116" - I'-011
<br />REVISIONS
<br />BY
<br />00
<br />CY)
<br />co Ni
<br />�6
<br />0
<br />W cil r--
<br />C\,
<br />Co
<br />� to
<br />- z
<br />00
<br />2
<br />C4
<br />r
<br />0
<br />E"
<br />0, -
<br />2
<br />Obi
<br />00
<br />C)
<br />6
<br />r
<br />0
<br />0
<br />0
<br />C
<br />0
<br />E LL
<br />M <
<br />-C
<br />o >
<br />C
<br />0
<br />0 UJ
<br />LL_
<br />Z
<br />Date: 04. 15. 13
<br />Scale: AS NOTED
<br />Project Mgr: AAY
<br />Drawn: DC
<br />Job: 13-08b
<br />Sheet
<br />A1b
<br />HAProjectsTrojects 2013\13008 - FMC Dialysis Ctr- Eiland\04-CD\13008b -FMC Dialysis CtT\04-Architectural\A01b-D1M FLPL.dwg, 4/16/2013 9:11:37 AM, DC
<br />
|