|
DOOR v UARDWARE 604EDULE
<br />NO.
<br />SIZE
<br />TYPE
<br />MATERIAL
<br />FRAME
<br />I4DWE
<br />FINI614
<br />REMARKS
<br />101
<br />3'-0" X 7'-0" X 1 3/4"
<br />A
<br />WOOD
<br />I
<br />I
<br />STAIN
<br />--
<br />102
<br />3'-0" X 7'-0" X 1 3/4"
<br />A
<br />WOOD
<br />1
<br />2
<br />STAIN
<br />--
<br />104
<br />3'-0" X 7'-0" X 1 3/4"
<br />A
<br />WOOD
<br />1
<br />2
<br />STAIN
<br />--
<br />108
<br />3'-0" X 7'-0" X 1 3/4"
<br />A
<br />WOOD
<br />I
<br />I
<br />STAIN
<br />COORDINATE WITH CHAIR LIFT MANUFACTURER
<br />201A
<br />3'-0" X 7'-0" X 1 3/4"
<br />A
<br />WOOD
<br />I
<br />I
<br />STAIN
<br />COORDINATE WITH CHAIR LIFT MANUFACTURER
<br />201E
<br />3'-0" X 7'-0" X 1 3/4"
<br />A
<br />WOOD
<br />I
<br />I
<br />STAIN
<br />REUSE EXISTING DOOR IN THIS LOCATION.
<br />202
<br />3'-0" X 7'-0" X 1 3/4"
<br />A
<br />WOOD
<br />I
<br />1
<br />STAIN
<br />--
<br />203
<br />PR 3' -0" X 7' -0" X 1 3/4"
<br />A
<br />WOOD
<br />I
<br />I
<br />STAIN
<br />--
<br />HARDWARE LEGEND
<br />HARDWARE SET #1
<br />HARDWARE SET #2
<br />PASSAGE SET
<br />PRIVACY SET
<br />1 1/2 PAIR BUTT HINGES
<br />1 1/2 PAIR SPRING LOADED HINGES
<br />DOOR STOP, FLOOR MOUNTED
<br />DOOR STOP, FLOOR MOUNTED
<br />SILENCERS (3 PER FRAME MIN.)
<br />SILENCERS (3 PER FRAME MIN.)
<br />DOOR TYPES FRAME TYPE5
<br />SCHD. DIM.
<br />O_
<br />W
<br />z
<br />j
<br />W
<br />Q
<br />\
<br />W
<br />J
<br />\
<br />D
<br />0
<br />W
<br />\'
<br />W
<br />A
<br />SOLID CORE
<br />WOOD
<br />SCHD. DIM.
<br />N
<br />z
<br />O
<br />co
<br />W
<br />_J
<br />W
<br />z
<br />I
<br />HOLLOW METAL
<br />FINISH SCHEDULE
<br />RM NO.
<br />ROOM NAME
<br />FLOOR
<br />BASE
<br />WALLS
<br />CLG
<br />REMARKS
<br />NORTH
<br />EAST
<br />SOUTH
<br />WEST TYPE
<br />HT
<br />101
<br />MENS LOCKER ROOM
<br />LVT-I
<br />B-I
<br />P-1
<br />P-1
<br />P-1
<br />P-1
<br />C-1
<br />9'-0"
<br />--
<br />102
<br />SHOWER ROOM
<br />LVT-I
<br />B-I
<br />P-3
<br />P-3
<br />P-3
<br />P-3
<br />--
<br />9'-0"
<br />GYPSUM BOARD CEILING
<br />103
<br />WOMENS LOCKER ROOM
<br />LVT-I
<br />B-I
<br />P-1
<br />P-1
<br />P-1
<br />P-1
<br />C-1
<br />9'-0"
<br />--
<br />104
<br />SHOWER ROOM
<br />LVT-I
<br />B-I
<br />P-3
<br />P-3
<br />P-3
<br />P-3
<br />--
<br />9'-0"
<br />GYPSUM BOARD CEILING
<br />105
<br />WOMENS RESTROOM
<br />EXIST
<br />B-I
<br />P-3
<br />P-3
<br />P-3
<br />P-3
<br />C-1
<br />EXIST
<br />--
<br />106
<br />MENS RESTROOM
<br />EXIST
<br />B-1
<br />P-3
<br />P-3
<br />P-3
<br />P-3
<br />C-1
<br />EXIST
<br />--
<br />107
<br />CORRIDOR
<br />EXIST
<br />B-I
<br />P-1
<br />P-1
<br />P-1
<br />P-1
<br />C-1
<br />OPEN
<br />--
<br />108
<br />CHAIR LIFT
<br />EXIST
<br />B-I
<br />P-1
<br />P-1
<br />P-1
<br />P-1
<br />C-1
<br />OPEN
<br />--
<br />201
<br />BREAK ROOM
<br />EXIST
<br />B-1
<br />P-1
<br />P-1
<br />P-1
<br />P-1
<br />C-1
<br />EXIST
<br />--
<br />202
<br />SEATING AREA
<br />EXIST
<br />B-I
<br />P-1
<br />P-1
<br />P-1
<br />P-1
<br />C-1
<br />EXIST
<br />--
<br />203
<br />MECHANICAL CLOSET
<br />EXIST
<br />B-I
<br />P-1
<br />P-1
<br />P-1
<br />P-1
<br />--
<br />OPEN
<br />--
<br />-- --- — -- — ....
<br />d
<br />I
<br />EXIST TO
<br />-- REMAIN �
<br />,� 1 ;j , ;
<br />._ A .. _ 1
<br />�...
<br />r
<br />u EXIST TO
<br />REMAIN
<br />a
<br />au
<br />LVT-I I EXIST TO EXIST TO
<br />LVT-I E REMAIN REMAIN
<br />I
<br />- .. 1
<br />l
<br />LVT-I
<br />LVT-I
<br />l
<br />\ t
<br />FIN15" FLOOR PLAN
<br />SCALE, 1/8" = 1'-0"
<br />DOOR AND HARDWARE NOTES
<br />I. ALL NEW DOORS SHALL BE STAIN GRADE FLUSH WOOD
<br />DOORS W/ HOLLOW METAL FRAMES TO MATCH BUILDING
<br />STANDARD.
<br />2. ALL HARDWARE SHALL BE LEVER ACTION, SCHLAGE OR
<br />APPROVED EQUAL TO MATCH BUILDING STANDARD.
<br />FINISH LEGEND
<br />FLOORING
<br />MATERIAL:
<br />LUXURY VINYL TILE
<br />LVT-I
<br />MANUFACTURER,
<br />TO BE DETERMINED
<br />COLOR,
<br />TO BE SELECTED BY TENANT
<br />WALL EASE
<br />MATERIAL,
<br />4" COVED VINYL, 6" IN TOILET ROOM(S)
<br />B-I
<br />MANUFACTURER,
<br />JOHNSONITE OR APPROVED EQUAL
<br />COLOR,
<br />TO BE SELECTED BY TENANT
<br />PAINT
<br />MATERIAL,
<br />PAINT, LOW LUSTER
<br />P-1
<br />MANUFACTURER,
<br />BENJAMIN MOORE OR APPROVED EQUAL
<br />COLOR,
<br />TO BE SELECTED BY TENANT
<br />MATERIAL,
<br />PAINT, SEMI -GLOSS OIL BASED ENAMEL
<br />P-2
<br />MANUFACTURER,
<br />BENJAMIN MOORE OR APPROVED EQUAL
<br />COLOR,
<br />TO BE SELECTED BY TENANT
<br />LOCATION,
<br />DOOR FRAMES, METALS
<br />MATERIAL:
<br />PAINT, EPDXY
<br />P-3
<br />MANUFACTURER,
<br />BENJAMIN MOORE OR APPROVED EQUAL
<br />COLOR,
<br />TO BE SELECTED BY TENANT
<br />LOCATIONS,
<br />RESTROOMS AND WET AREAS
<br />CEILING
<br />MATERIAL,
<br />2' X 4' ACOUSTICAL PANEL CEILING TILE
<br />C-1
<br />MANUFACTURER,
<br />USG OR APPROVED EQUAL
<br />STYLE,
<br />TO BE SELECTED BY TENANT
<br />PROVISIONS FOR BARRIER FREE DOORS
<br />PULL SIDE x
<br />PUSH SIDE
<br />C 18 min.
<br />E 24 preferred E
<br />�c l
<br />NOTE: x - 12 I IF THE
<br />DOOR HA TN A
<br />CLOSER AND A LATCH.
<br />(A) FRONT APPROACHES
<br />PULL SIDE I
<br />x USN SIDE
<br />NOTE, x = 36 IN MINIMUM NOTE, y,--, 48 JIN MIN. IF
<br />IF y = 60 IN x = 42 IN DOOR NA TH A
<br />MINIMUM IF y = 54 IN. LATCH AND A CLOSER.
<br />(b) HINGE SIDE APPROACHES
<br />PULL SIDE PUSH SIDE
<br />24 min.
<br />c
<br />E x 24 m n.
<br />� y
<br />NOTE, y = 54 IN MINIMUM NOTE 48 IN MIN. IF
<br />IF THE DOOR HAS A THE DOO S A
<br />CLOSER. CLOSER.
<br />(C) LATCH SIDE APPROACHES
<br />NOTE, ALL DOORS IN ALCOVES SHALL COMPLY WITH THE
<br />CLEARANCES FOR FRONT APPROACHES.
<br />FINI514 NOTES
<br />I. ALL FINISHES TO BE SELECTED BY TENANT AND
<br />APPROVED BY OWNER.
<br />2. COORDINATE AND VERIFY ALL FINISHES AND
<br />LOCATIONS WITH TENANT.
<br />3. CONTRACTOR TO PROVIDE MATERIALS AND SAMPLES
<br />TO BE APPROVED BY OWNER AND TENANT PRIOR TO
<br />ORDERING.
<br />4. ALL WALLS TO BE SANDED AND PRIMED PRIOR TO
<br />RECEIVING PAINT.
<br />5. ALL WALLS TO BE PAINTED SHALL RECEIVE (2) TWO
<br />COATS MIN. OF LATEX PAINT, OR MORE AS REQUIRED
<br />FOR COMPLETE COVERAGE, IN A LOW LUSTER FINISH
<br />COLOR OVER (1) COAT PRIMER OF SIMILAR COLOR.
<br />6. ALL HM DOOR AND/OR WINDOW FRAMES SHALL
<br />RECEIVE (2) COATS OF SPECIFIED OIL -BASED ENAMEL
<br />(P-2) OVER (1) COAT FACTORY PRIMER.
<br />7. MEZZANINE TO RECEIVE NO NEW FLOOR FINISH.
<br />EXISTING TO REMAIN.
<br />8. DOORS - ALL EXISTING INTERIOR DOORS TO RECEIVE
<br />NEW FINISH IN AREA OF WORK.
<br />DOOR AND 14AP-DXVARE COMPLIANCE NOTES
<br />I. ALL DOORS OVER 7'-0" A.F.F. SHALL HAVE 2 PAIR BUTT
<br />HINGES.
<br />2. HANDLES, PULLS, LATHES, LOCKS, AND OTHER
<br />OPERATING DEVICES ON ACCESSIBLE DOORS SHALL HAVE
<br />A SHAPE THAT IS EASY TO GRASP WITH ONE HAND AND
<br />DOES NOT REQUIRE TIGHT GRASPING, TIGHT -PINCHING, OR
<br />TWISTING OF THE WRIST TO OPERATE. LEVER -OPERATED
<br />MECHANISMS, PUSH -TYPE MECHANISMS, AND U-SHAPED
<br />HANDLES ARE ACCEPTABLE DESIGNS.
<br />3. HARDWARE REQUIRED FOR ACCESIBLE DOOR PASSAGE
<br />SHALL BE MOUNTED NO HIGHER THAN 48 INCHES ABOVE
<br />FINISHED FLOOR.
<br />4. BOTH SIDES OF ALL DOORS SHALL HAVE THE SAME
<br />ELEVATION WITH NO MORE THEN 1/2" DIFFERENCE ON
<br />EITHER SIDE.
<br />5. THE FORCES REQUIRED TO FULLY OPEN FIRE -RATED
<br />(LABELED) DOORS SHALL NOT EXCEED A 15 LBF TO RELEASE
<br />THE LATCH, A 30 LBF TO SET THE DOOR IN MOTION AND A
<br />15 LBF TO OPEN THE DOOR TO THE MINIMUM REQUIRED WIDTH.
<br />THESE FORCES BEING APPLIED TO THE LATCH STILE.
<br />6. EXTERIOR SWINGING DOORS SHALL BE OPENABLE BY A
<br />FORCE OF NOT MORE THAN 8.5 POUNDS APPLIED TO THE
<br />LATCH STILE.
<br />7. PROVIDE BUILDING STANDARD DOOR STOPS, HINGES AND
<br />SILENCERS AT ALL DOORS.
<br />8. NON -RATED INTERIOR SWINGING DOORS SHALL BE
<br />OPENABLE BY A FORCE OF NOT MORE THAN FIVE (5)
<br />POUNDS APPLIED TO THE LATCH STILE.
<br />C14ANC4E IN LEVEL COMPLIANCE
<br />I. CHANGES IN LEVEL OF 1/4 INCH HIGH MAXIMUM SHALL BE
<br />PERMITTED TO BE VERTICAL.
<br />2. CHANGES IN LEVEL BETWEEN 1/4 INCH NIGH MINIMUM AND
<br />1/2 INCH HIGH MAXIMUM SHALL BE BEVELED WITH A SLOPE
<br />NOT STEEPER THAN 1:2.
<br />3. A CHANGE IN LEVEL OF 1/2 INCH IS PERMITTED TO BE 1/4
<br />INCH VERTICAL PLUS 1/4 INCH BEVELED, HOWEVER, IN NO
<br />CASE MAY THE COMBINED CHANGE IN LEVEL EXCEED 1/2
<br />INCH. CHANGES IN LEVEL EXCEEDING 1/2 INCH MUST COMPLY
<br />WITH RAMPS OR CURB RAMPS REQUIREMENTS PER THE
<br />MOST CURRENT ACCESSIBILITY CODE.
<br />FINI514 MATERIAL COMPLIANCE NOTES
<br />I. ALL WALL AND CEILING FINISH MATERIALS INCLUDING
<br />VINYL AND RUBBER BASE, SHALL BE CLASSIFIED IN
<br />ACCORDANCE WITH ASTM E-84 AND SHALL COMPLY WITH
<br />CLASS B INTERIOR FINISH WITH FLAME SPREAD 26-75, AND
<br />SMOKE DEVELOPED 0-450. EXCEPT AS NOTED BELOW.
<br />2. ALL EXPOSED WOOD TRIM REGARDLESS OF FINISH, SHALL
<br />BE OF A SPECIES OTHER THAN PINE AND IN NO CASE
<br />SHALL THE FLAME SPREAD CLASSIFICATION EXCEED 200
<br />AND SMOKE DEVELOPED 0-450, AS A CLASS ' C' INTERIOR
<br />FINISH MATERIAL.
<br />3. MATERIALS LESS THAN 1/28 INCH THICK WHICH ARE
<br />CEMENTED TO THE SUBSTRATE WHICH HAVE FLAME
<br />SPREAD CHARACTERISTICS NO GREATER THAN PAPER OF
<br />1/28 INCH THICKNESS DO NOT HAVE TO BE CLASSIFIED IN
<br />ACCORDANCE WITH ASTM E-84.
<br />4. MATERIALS SUCH AS CARPETING HAVING A NAPPED,
<br />TUFTED, LOOPED, OR SIMILAR SURFACE WHEN APPLIED TO
<br />WALL OR CEILING SHALL MEET THE REQUIREMENTS OF A
<br />CLASS 'A' INTERIOR FINISH.
<br />5. INTERIOR FINISH MATERIAL SHALL BE CEMENTED OR
<br />OTHERWISE FASTENED IN PLACE SO THAT THEY WILL NOT
<br />READILY BECOME DETACHED WHEN SUBJECTED TO ROOM
<br />TEMPERATURES OF 300 DEGREES F. FOR 25 MINUTES.
<br />6. FLOORING MATERIALS SHALL HAVE A MINIMUM OF CLASS
<br />II INTERIOR FLOOR FINISH RATING AS CLASSIFIED IN
<br />ACCORDANCE WITH NFPA
<br />7. CARPET INCLUDING PAD, WHEN SPECIFIED, SHALL COMPLY
<br />WITH CLASS II INTERIOR FINISH REQUIREMENTS NOTED
<br />ABOVE.
<br />8. IF CARPET OR CARPET TILE IS USED ON A GROUND OR
<br />FLOOR SURFACE, THEN IT SHALL BE SECURELY ATTACHED,
<br />HAVE A FIRM CUSHION, PAD, OR BACKING, OR NO CUSHION
<br />OR PAD, AND HAVE A LEVEL LOOP TEXTURED LOOP, LEVEL
<br />CUT PILE, OR LEVEL CUT/UNCUT PILE TEXTURE. THE
<br />MAXIMUM PILE HEIGHT SHALL BE 1/2 INCH, EXPOSED EDGES
<br />OR CARPET SHALL BE FASTENED TO FLOOR SURFACES
<br />AND HAVE A TRIM ALONG THE ENTIRE LENGTH OF THE
<br />EXPOSED EDGE. CARPET EDGE TRIM SHALL COMPLY WITH
<br />303 CHANGES IN LEVEL SECTION OF THE FLORIDA BUILDING
<br />CODE, ACCESSIBILITY.
<br />9. GROUND AND FLOOR SURFACES ALONG ACCESSIBLE
<br />ROUTES AND IN ACCESSIBLE ROOMS AND SPACES,
<br />INCLUDING FLOORS, WALKS, RAMPS, STAIRS, AND CURB
<br />RAMPS SHALL BE STABLE, FIRM, SHALL HAVE A SLIP
<br />RESISTANT FINISH, AND SHALL COMPLY WITH 302 FLOOR OR
<br />GROUND SURFACES AND 303 CHANGES IN LEVEL OF THE
<br />FLORIDA BUILDING CODE, ACCESSIBILITY.
<br />FARMER
<br />ARCHITECTURE
<br />Daniel H, Farmer, AJA
<br />License # AR1 7 0
<br />941 Lake Baldwin Lane
<br />Orlando, ndo, L 32814
<br />321.4413320
<br />.lUz 3 A 2020
<br />U
<br />0
<br />O
<br />0�
<br />CL
<br />O
<br />M
<br />"'
<br />Z
<br />0r)
<br />L
<br />�
<br />O
<br />�
<br />p
<br />�
<br />O
<br />�
<br />_j
<br />G
<br />Q
<br />z-JI
<br />w
<br />Q
<br />ra
<br />
|