|
GENERAL ELECTRICAL NOTES (ALL "E" DRAWINGS):
<br />1 A. REGULATORY REQUIREMENTS: PROVIDE ALL WORK TO MEET OR EXCEED MINIMUM REGULATORY REQUIREMENTS
<br />INCLUDING:
<br />FLORIDA BUILDING CODE: 2004 EDITION WITH 2O06 SUPPLEMENT
<br />FLORIDA FIRE PREVENTION CODE: 2006 EDITION
<br />ADVISE THE PROJECT A/E OF ANY CHANGES IN THE CONTRACT DOCUMENTS THAT MAY BE REQUIRED IN ORDER TO
<br />MEET CODE, PRIOR TO WORK (ORDERING, ROUGHING, OR INSTALLATION).
<br />B. COORDINATION: COORDINATE WITH OTHER WORK FOR AVAILABLE SPACE, SEQUENCE OF INSTALLATION, AND
<br />INSTALLATION REQUIREMENTS, PRIOR TO COMMENCING CONSTRUCTION. ADVISE THE PROJECT A/E OF ANY
<br />CHANGES IN THE CONTRACT DOCUMENTS THAT MAY BE REQUIRED FOR THE WORK TO BE PERFORMED.
<br />C. EXISTING FIELD CONDITIONS: THE CONTRACT DOCUMENTS INDICATE THE DESIGN INTENT USING AVAILABLE
<br />INFORMATION. THE CONTRACTOR IS TO ADVISE THE PROJECT A/E IF EXISTING CONDITIONS DIFFER FROM THOSE
<br />SHOWN. ALSO ADVISE THE PROJECT A/E IF CODE OR SAFETY CONFLICTS EXIST. THE CONTRACTOR IS REQUIRED
<br />TO VISIT THE SITE (PRIOR TO THE BID) TO BECOME FAMILIAR WITH CONDITIONS AND INSTALLATION DETAILS THAT
<br />WILL AFFECT HIS WORK. CHANGES IN THE CONTRACT SUM AND CONTRACT TIME WILL NOT BE ALLOWED FOR
<br />FAILURE TO INVESTIGATE FIELD CONDITIONS. ALL WORK IS NEW, UNLESS NOTED OTHERWISE.
<br />D. DEVICE LOCATIONS: COORDINATE THE LOCATIONS OF EXISTING LIGHTING FIXTURES, AND OTHER CEILING ITEMS IN
<br />THE FIELD. ALSO COORDINATE LOCATIONS OF NEW DEVICES AND OTHER EXISTING WALL ITEMS IN THE FIELD.
<br />LOCATE ALL CONDUITS AND WIRING IN FINISHED ROOMS OR SPACES WITHIN CONCEALED LOCATIONS (FURRED
<br />CHASES OR SUSPENDED CEILINGS, AS AVAILABLE), UNLESS SPECIFICALLY NOTED OTHERWISE.
<br />E. SIZES: WHEN A CONDUIT OR CONDUCTOR SIZE IS NOT INDICATED, SIZE THAT CONDUIT OR CONDUCTOR. USING
<br />THE LARGER ADJACENT UPSTREAM SIZE (IN ACCORDANCE WITH THE NEC), UNLESS A SMALLER SIZE HAS BEEN
<br />APPROVED BY THE PROJECT A/E. PROVIDE 1 /2 INCH MINIMUM CONDUIT SIZE, UNLESS SPECIFICALLY NOTED
<br />OTHERWISE. FOR SIZES NOT INDICATED ON PLANS, REFER TO RISER DIAGRAMS AND OTHER LOCATIONS IN THE
<br />CONTRACT DOCUMENTS (DRAWINGS AND SPECIFICATIONS) FOR INFORMATION.
<br />2 THE ELECTRICAL CONTRACTOR SHALL OBTAIN ALL PERMITS AND PAY SUCH FEES, AS MAY BE NECESSARY FOR
<br />INSPECTIONS, TESTS, AND OTHER SERVICES NECESSARY FOR THE COMPLETION OF THIS WORK.
<br />3 CONTRACTOR SHALL VISIT THE SITE AND EXAMINE CONDITIONS OF THE PREMISES AND THE CHARACTER AND EXTENT OF
<br />WORK REQUIRED PRIOR TO SUBMISSION OF BIDS. ANY DIFFICULTIES IN COMPLYING WITH THE DRAWINGS AND
<br />SPECIFICATIONS SHALL BE BROUGHT TO THE ATTENTION OF THE ARCHITECT / ENGINEER BEFORE BIDDING.
<br />4 IT IS THE INTENT OF THESE DRAWINGS AND OTHER RELATED DOCUMENTS TO PRODUCE A COMPLETE AND FUNCTIONING
<br />ELECTRICAL SYSTEM. THE ELECTRICAL CONTRACTOR SHALL PROVIDE ALL LABOR, MATERIAL AND OTHER SERVICES AS
<br />MAY BE NECESSARY TO ACHIEVE THIS PRODUCT. IT SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR TO BRING TO
<br />THE ATTENTION OF THE ARCHITECT ANY DISCREPANCIES IN THE PLANS AND SPECIFICATIONS THAT WILL AFFECT THE
<br />WORK, PRIOR TO SUBMISSION OF HIS BID PRICE.
<br />5 IF, DURING THE COURSE OF THE WORK, THE CONTRACTOR EXPERIENCES A PROBLEM WITH THE PERFORMANCE OF THE
<br />INSTALLATION RELATIVE TO THE PLANS AND SPECIFICATIONS, THE NATIONAL ELECTRICAL CODE, OTHER APPLICABLE
<br />CODES AND GOVERNING DOCUMENTS, THE CONTRACTOR SHALL BRING THE PROBLEM TO THE ATTENTION OF THE
<br />ARCHITECT AND / OR THE ENGINEER FOR RESOLUTION PRIOR TO EXECUTION OF THE WORK.
<br />6 ALL MATERIAL SHALL BE NEW AND BEAR THE U.L. LABEL LISTED APPROVAL FOR ITS INSTALLED APPLICATION.
<br />7 ALL MAJOR COMPONENTS OF THE ELECTRICAL SYSTEMS, SUCH AS SAFETY DISCONNECT SWITCHES AND PANELBOARDS,
<br />SHALL BE BY THE SAME MANUFACTURER AND SHALL BE ONE OF THE FOLLOWING: SQUARE "D" COMPANY, GENERAL
<br />ELECTRIC, OR CUTLER —HAMMER.
<br />8 CIRCUIT BREAKERS USED FOR SWITCHING OF LIGHTING OR SIGN CIRCUITS SHALL BE APPROVED FOR SWITCHING DUTY
<br />AND SHALL BE MARKED "SWD" IN ACCORDANCE WITH N.E.C. ART. 240.83 (D).
<br />9 PROVIDE "LOCKING" TYPE DEVICES ON ALL CIRCUIT BREAKERS CONNECTED TO EMERGENCY AND NIGHT LIGHTING, SIGNS,
<br />FIRE ALARM, SECURITY SYSTEMS, AFTER HOUR DEPOSIT AND AUTOMATIC TELLER MACHINES.
<br />10 ALL SWITCHES, DUPLEX RECEPTACLES, AND TELEPHONE OUTLETS TO BE FLUSH MOUNTED, THROUGHOUT.
<br />11 ALL SERVICE EQUIPMENT SHALL BE GROUNDED IN ACCORDANCE WITH N.E.C. ARTICLE 250.
<br />12 ELECTRICAL CONTRACTOR SHALL COORDINATE WITH MECHANICAL CONTRACTOR FOR EXACT LOCATIONS OF HVAC
<br />EQUIPMENT.
<br />13 SEE REFLECTED CEILING PLAN FOR EXACT LOCATION OF LIGHT FIXTURES.
<br />14 ELECTRICAL PLANS ARE DIAGRAMMATIC. DO NOT SCALE DRAWINGS.
<br />15 CONSULT PLANS OF ALL OTHER TRADES FOR COORDINATION AND FOR RELATED AND ADJOINING WORK.
<br />16 CONSULT ARCHITECTURAL AND STRUCTURAL PLANS AND DETAILS FOR CONSTRUCTION TYPE, HEADROOM, ROOM FINISHES,
<br />CEILINGS, ETC.
<br />17 ALL WORK SHALL BE DONE AT SUCH TIMES AND IN SUCH A MANNER AS WILL LEAST INTERFERE WITH THE
<br />MAINTENANCE AND OPERATION OF ALL RELATED OR AFFECTED SYSTEMS. ALL POWER OUTAGES SHALL BE COORDINATED
<br />WITH OWNER.
<br />18 THE CORRECT NUMBER OF WIRES MAY NOT BE INDICATED FOR ALL CIRCUITS, ONLY THOSE WHERE CLARIFICATION IS
<br />NECESSARY. THE ELECTRICAL CONTRACTOR SHALL PROVIDE ALL WIRES NECESSARY FOR THE PROPER FUNCTION OF
<br />THE SYSTEM.
<br />19 ALL EMPTY CONDUIT RUNS IN EXCESS OF 10 FT. SHALL BE PROVIDED WITH A PULL WIRE OR FISH TAPE / CORD.
<br />20 ALL BRANCH CIRCUIT CONDUCTORS FROM THE PANEL TO THE FIRST OUTLET SHALL BE INCREASED TO THE NEXT
<br />LARGER SIZE WHERE THE LENGTH OF THE HOME RUN EXCEEDS 100 FT. ON 120/208V CIRCUITS.
<br />21 CONTRACTOR SHALL BE RESPONSIBLE FOR PROPER SIZING OF ALL MOTOR OVERLOAD DEVICES (HEATERS) IN
<br />STARTERS BASED ON ACTUAL NAMEPLATE RATINGS ON THE MOTORS BEING INSTALLED.
<br />22 CONTRACTOR SHALL NOTE U.L. LABELS ON PACKAGE TYPE MECHANICAL EQUIPMENT. IF U.L. LABEL ON MECHANICAL
<br />EQUIPMENT CALLS FOR THE OVERCURRENT PROTECTIVE DEVICE TO BE FUSES, THE ELECTRICAL CONTRACTOR SHALL
<br />PROVIDE A FUSED DISCONNECT SWITCH WITH PROPER SIZE FUSES AT THE SWITCH LOCATION INDICATED ON DRAWINGS.
<br />23 CONTRACTOR SHALL VERIFY WIRE SIZES, C/B AND FUSE RATINGS FOR ALL HVAC EQUIPMENT, AND BRING TO THE
<br />ATTENTION OF THE ARCHITECT AND / OR THE ENGINEER ANY DISCREPANCIES AFFECTING THE WORK PRIOR TO
<br />PROCEEDING.
<br />24 HORSEPOWER RATINGS INDICATED ON DRAWING MAY DIFFER FROM ACTUAL EQUIPMENT FURNISHED. IF FURNISHED
<br />EQUIPMENT DIFFERS FROM RATINGS ON DRAWINGS, CONTRACTOR SHALL NOTIFY ARCHITECT AND / OR THE ENGINEER
<br />FOR APPROPRIATE ACTION TO BE TAKEN.
<br />25 PROVIDE APPROVED "HACR" TYPE CIRCUIT BREAKERS FOR ALL HEATING, AIR CONDITIONING, AND REFRIGERATION
<br />EQUIPMENT INDICATED FOR CONNECTION ON ELECTRICAL DRAWINGS.
<br />26 ALL DEVICES AND COVER PLATES SHALL BE CONSTRUCTED OF MOLDED NYLON MATERIALS. COLOR OF DEVICES AND
<br />MATCHING COVER PLATES SHALL BE AS SELECTED BY THE ARCHITECT.
<br />27 THE CONTRACTOR SHALL GUARANTEE ALL HIS WORK AND MATERIALS FOR A PERIOD OF ONE YEAR AFTER ACCEPTANCE
<br />BY OWNER.
<br />28 IT SHALL BE THE RESPONSIBILITY OF THE ELECTRICAL CONTRACTOR TO COORDINATE SERVICE REQUIREMENTS FOR
<br />POWER AND TELEPHONE UTILITIES.
<br />29 PROVIDE A #10 NEUTRAL CONDUCTOR FOR ALL MULTIWIRE RECEPTACLE BRANCH CIRCUITS.
<br />30 FOR ALL EQUIPMENT RATED 100 AMPS OR LESS, E.C. SHALL PROVIDE TERMINATIONS WHICH ARE LISTED FOR USE AT
<br />75 DEGREES C OR PROVIDE WIRING SIZED USING THE 60 DEGREE C AMPACITY.
<br />31 RECEPTACLES ON SEPARATE CIRCUITS SHALL BE RATED 20 AMP, 120 VOLT.
<br />32 WIRE AND CABLE SHALL BE COPPER, TYPE THHN/THWN, MINIMUM #12 AWG.
<br />33 PANELBOARD DIRECTORIES SHALL BE UPDATED TO REFLECT ALL WORK DONE AS PART OF THIS PROJECT.
<br />34 ALL NEW BRANCH CIRCUITS SHALL BE EQUIPPED WITH A MINIMUM #12 AWG GREEN EQUIPMENT GROUND CONDUCTOR.
<br />35 CONDUIT RUN UNDERGROUND SHALL BE PVC SCHEDULE 40. ALL BUILDING WIRING SHALL BE RUN IN METALLIC
<br />CONDUIT. INTERIOR CONDUIT SHALL BE EMT. EXTERIOR CONDUIT SHALL BE IMC OR RMC.
<br />36 FOR IG RECEPTACLES, PROVIDE 2#12 GREEN GROUND WIRES IN BRANCH CIRCUIT BACK TO PANELBOARD.
<br />37 — 49 NOT USED.
<br />50 OPEN / CLOSED LANE SIGNS ARE CONTROLLED BY SWITCHES AT THE DRIVE / THRU TELLER LOCATION. THE ATM
<br />SIGN STAYS ON CONTINUOUSLY.
<br />51 SEE SWITCHING STATION DETAIL THIS SHEET.
<br />52 4#12, 1/2"C TO LIGHTING TERMINAL BLOCK LTB.
<br />53 LIGHTING TROUGH T-1 WITH LIGHTING CONTACTORS AND TIME CLOCK. SEE TROUGH T-1 DETAIL THIS SHEET.
<br />54 LABEL SWITCH "LOBBY LIGHTING". PROVIDE 2#12, 1/2"C TO LIGHTING TERMINAL BLOCK LTB.
<br />SPROVIDE J—BOX WITH BLANK COVER ABOVE THE HUNG CEILING (13'8" AFF) FOR CONNECTION TO SIGN BY OTHERS.
<br />56 CONNECT BATTERY CHARGE CIRCUIT AHEAD OF SWITCHING.
<br />57 MOUNT PHOTOCELL ON NORTH FACING PARAPET WALL.
<br />58 PROVIDE CONNECTION TO SIGN. COORDINATE CONNECTION WITH SIGN SUPPLIER.
<br />59 — S NOT USED.
<br />70 FOR AHD POWER, MOUNT 70" AFF TO BOTTOM OF BOX.
<br />71 PROVIDE CONNECTION (USE FLEXIBLE CONDUIT) TO MECHANICAL FAN (WITH PLUG—IN MOTOR USED AS DISCONNECT).
<br />ROUTE POWER TO TIME CLOCK.
<br />72 PROVIDE CONNECTION (USE FLEXIBLE CONDUIT) TO MECHANICAL FAN (WITH PLUG—IN MOTOR USED AS DISCONNECT).
<br />ROUTE POWER THROUGH MECHANICAL WALL DEVICE (THERMOSTAT OR WALL TIMER).
<br />73 MOUNT RECEPTACLES INSIDE CABINET. COORDINATE INSTALLATION WITH MILL WORK PROVIDER.
<br />74 PROVIDE 4" SQUARE JUNCTION BOX ABOVE CEILING FOR EACH LANE.
<br />75 PROVIDE CONNECTION TO DRIVE—THRU CUSTOMER UNIT.
<br />76 MOUNT RECEPTACLES ON OWNER FURNISHED DATA RACK. COORDINATE LOCATION WITH OWNER.
<br />77 OUTLETS TO BE MOUNTED HORIZONTALLY. COORDINATE OUTLET LOCATION WITH OWNER FURNISHED FLAT SCREEN TV
<br />BRACKET.
<br />78 3/4"C WITH RG-6 COAX CABLE TO SATELLITE CONTROLLER. PROVIDE 5' SLACK CABLE.
<br />79 3/4"C WITH RG-6 COAX CABLE TO STB. PROVIDE 5' SLACK CABLE AT EACH END.
<br />80 ALL COAX CABLE TERMINATIONS BY A/V SATELLITE EQUIPMENT INSTALLER.
<br />81 PROVIDE CONNECTION (USE FLEXIBLE CONDUIT) TO MECHANICAL FAN (WITH PLUG—IN MOTOR USED AS DISCONNECT).
<br />CONNECT TO LIGHTING CIRCUIT AHEAD OF _SWITCHING. ROUTE POWER THROUGH MECHANICAL WALL DEVICE
<br />(THERMOSTAT OR WALL TIMER).
<br />82 3" TELEPHONE SERVICE CONDUIT. SEE "MAIN TELEPHONE TERMINAL BOARD (MTB)" THIS DRAWING.
<br />83 PROVIDE 6" SQ. JUNCTION BOX MOUNTED IN KNEE SPACE.
<br />84 COORDINATE LOCATION WITH BANK. MOUNT ABOVE CANOPY CEILING.
<br />85 PROVIDE 3/4" CONDUIT FOR VIDEO TO JUNCTION BOX AT TELLER WINDOW.
<br />86 PROVIDE 3/4" CONDUIT FOR AUDIO AND CONTROL TO JB-1. Y
<br />87 LOCATION OF SATELLITE DISH CONTROLLER INSIDE MILLWORK.
<br />88 CONNECT TO VAULT VENTILATOR.
<br />SCONNECT TO VAULT LIGHT CIRCUIT. MOUNT ABOVE VAULT DOOR.
<br />90 MOUNT RECEPTACLE ABOVE CEILING FOR DYE PACK UNIT.
<br />91 FOR IRRIGATION CONTROLLER, COORDINATE EXACT LOCATION WITH IRRIGATION CONTRACTOR.
<br />92 PROVIDE DISCONNECT SWITCH AND MAKE CONNECTION TO ELECTRIC WATER HEATER UTILIZING LIQUIDTIGHT FLEXIBLE
<br />L C N IT
<br />93 PROVIDE FLUSH MOUNT JUNCTION BOX FOR POWER CONNECTION TO PREWIRED OFFICE FURNITURE. UTILIZE FLEXIBLE
<br />CONDUIT. PROVIDE CONNECTION WITH 3 PHASE WIRES, 2 NEUTRALS AND 1 GROUND. COORDINATE WIRING
<br />CONNECTION WITH OFFICE FURNITURE SUPPLIER PRIOR TO ROUGHING. REVERIFY WALL LOCATION FOR CONNECTION TO
<br />OFFICE FURNITURE.
<br />94 PROVIDE FLUSH MOUNT JUNCTION BOX FOR TELECOMMUNICATIONS CONNECTION TO PREWIRED OFFICE FURNITURE.
<br />UTILIZE FLEXIBLE CONDUIT. COORDINATE CONNECTION WITH OFFICE FURNITURE SUPPLIER PRIOR TO ROUGHING.
<br />REVERIFY WALL LOCATION FOR CONNECTION TO OFFICE FURNITURE.
<br />95 PROVIDE CONNECTION TO ROOFTOP UNITS PACKAGED DISCONNECT USING LIQUIDTIGHT FLEXIBLE CONDUIT. ROUTE
<br />CONDUIT WITHIN UNIT TO AVOID ROOF PENETRATION.
<br />96 PROVIDE (2) 1" CONDUITS TO DATA RACK.
<br />97 SURFACE MOUNT OUTLET. RUN SURFACE METAL RACEWAY VERTICALLY TO ABOVE CEILING.
<br />98 SURFACE MOUNT OUTLET. RUN SURFACE METAL RACEWAY HORIZONTALLY TO CONDUIT UP IN WALL.
<br />99 COORDINATE MOUNTING HEIGHT OF JUNCTION BOX WITH SURROUND.
<br />00 CONDUIT TO ABOVE CEILING.
<br />101 MOUNT OUTLET HORIZONTALLY.
<br />10 MOUNT THIS RECEPTACLE AND TV OUTLET IN RECESSED ELECTRICAL BOX. LEVITON PRODUCT #4717—REB.
<br />0� 2#12, 1#12 G, 1/2"C TO TIME CLOCK.
<br />1 D 60" AFF TO CENTER OF BOX.
<br />FAI
<br />ELECTRICAL SYMBOL LEGEND
<br />HOMERUN TO PANELBOARD. NUMBER OF ARROWS INDICATES NUMBER OF CIRCUITS.
<br />CONDUIT RUN CONCEALED IN WALL OR ABOVE CEILING.
<br />/ CONDUIT RUN CONCEALED IN OR BELOW FLOOR OR UNDERGROUND.
<br />CONDUIT RUN EXPOSED
<br />SERVICE OR EQUIPMENT GROUND.
<br />❑
<br />JUNCTION BOX FLUSH MOUNTED UNLESS INDICATED OTHERWISE.
<br />=
<br />PANELBOARD (SURFACE MOUNTED).
<br />°
<br />TELEPHONE EQUIPMENT BACKBOARD, SEE TELEPHONE AND SATELLITE SCHEMATIC NOTES.
<br />A
<br />RECESSED FLUORESCENT LIGHTING FIXTURE. LETTER INDICATES TYPE.
<br />DARKENED HALF IN ANY LIGHTING FIXTURE SYMBOL SHOWN HEREIN INDICATES
<br />A
<br />THAT FIXTURE SHALL CONTAIN A SELF—CONTAINED BATTERY PACK
<br />DARKENED HALF IN ANY LIGHTING FIXTURE WITH NL SYMBOL SHOWN HEREIN INDICATES
<br />Zid
<br />THAT FIXTURE IS ON UNSWITCHED NIGHT LIGHTING SYSTEM, W/SELF—
<br />CONTAINED BATTERY PACK AND INVERTER
<br />O
<br />CEILING MOUNTED INCANDESCENT OR FLUORESCENT OR HID FIXTURE.
<br />®
<br />CEILING MOUNTED EXIT LIGHT. SINGLE FACE, BLACKENED AREA REPRESENTS FACE.
<br />WALL MOUNTED EXIT LIGHT. SINGLE FACE, BLACKENED AREA REPRESENTS FACE.
<br />SINGLE POLE SWITCH IN FLUSH OUTLET BOX, 48 INCHES ABOVE FINISHED FLOOR,
<br />UNLESS HEIGHT IS OTHERWISE NOTED ON PLAN.
<br />3
<br />THREE—WAY SWITCH IN OUTLET BOX, 48 INCHES ABOVE FINISHED FLOOR.
<br />WALL MOUNTED TYPE MOTION DETECTOR SWITCH IN FLUSH MOUNTED OUTLET BOX,
<br />D1
<br />48" ABOVE FINISHED FLOOR. LITHONIA MODEL #LIRW MVOLT.
<br />WALL MOUNTED TYPE MOTION DETECTOR SWITCH IN FLUSH MOUNTED OUTLET BOX,
<br />D2
<br />48" ABOVE FINISHED FLOOR. LITHONIA MODEL #LIRW DS MVOLT.
<br />T
<br />TWIST TIMER, TORK #A506H
<br />125—VOLT, 15A, 3 WIRE DUPLEX RECEPTACLE IN FLUSH OUTLET BOX, 18 INCHES ABOVE
<br />FINISHED FLOOR. SEE GENERAL NOTE 31.
<br />125—VOLT, 15A, 3 WIRE DOUBLE DUPLEX RECEPTACLE IN FLUSH OUTLET BOX,
<br />18" ABOVE FINISHED FLOOR. SEE GENERAL NOTE 31.
<br />125—VOLT, 15A, 3 WIRE DOUBLE DUPLEX RECEPTACLE IN FLUSH OUTLET BOX, 48 INCHES
<br />ABOVE FINISHED FLOOR, 6 INCHES ABOVE DESK/COUNTERTOP, OR 2 INCHES ABOVE
<br />COUNTERTOP BACKSPLASH AS REQUIRED BY CONDITION, OR AS NOTED. SEE GENERAL NOTE 31.
<br />125—VOLT, 15A, 3 WIRE DUPLEX RECEPTACLE IN FLUSH OUTLET BOX, 48 INCHES
<br />ABOVE FINISHED FLOOR, 6 INCHES ABOVE DESK/COUNTERTOP, OR 2 INCHES ABOVE
<br />COUNTERTOP BACKSPLASH AS REQUIRED BY CONDITION, OR AS NOTED. SEE GENERAL NOTE 31.
<br />EEC
<br />125—VOLT, 30A, SIMPLEX RECEPTACLE IN FLUSH OUTLET BOX, COORDINATE MOUNTING.
<br />SEE GENERAL NOTE 31.
<br />125—VOLT, 15A, 3 WIRE GROUND FAULT INTERRUPTER TYPE DUPLEX RECEPTACLE IN
<br />GFI
<br />FLUSH OUTLET BOX, 18 INCHES ABOVE FINISHED FLOOR, OR AS NOTED. SEE GENERAL NOTE 31.
<br />125—VOLT, 15A, 3 WIRE DUPLEX RECEPTACLE WITH STAINLESS STEEL WEATHERPROOF COVER,
<br />WP
<br />18 INCHES ABOVE FINISHED FLOOR, OR AS NOTED. SEE GENERAL NOTE 31.
<br />125—VOLT, 15A, 3 WIRE ISOLATED GROUND TYPE RECEPTACLE IN
<br />IG
<br />FLUSH OUTLET BOX, 18 INCHES ABOVE FINISHED FLOOR, OR AS NOTED. SEE GENERAL NOTE 36.
<br />125—VOLT, 15A, 3 WIRE ISOLATED GROUND TYPE RECEPTACLE IN FLUSH OUTLET BOX MOUNTED
<br />EWC
<br />UP IN EWC CABINET, 18 INCHES ABOVE FINISHED FLOOR, OR AS NOTED. SEE GENERAL NOTE 31..
<br />PROVIDE NEW WALKER RFB4 SERIES CAST IRON FLOOR BOX, FOR CONCRETE ON GRADE,
<br />•
<br />®
<br />WITH S36BBT—CAL COVER PLATE. COORDINATE COLOR WITH OWNER. PROVIDE WITH TWO DUPLEX
<br />N5-15R OUTLETS. STUB 1"EC FROM COMMUNICATIONS COMPARTMENTS TO ACCESSIBLE CEILING SPACE
<br />OR AS INDICATED ON DRAWINGS.
<br />FLUSH OUTLET BOX FOR WALL —MOUNTED TELEPHONE 48 INCHES ABOVE FINISHED
<br />FLOOR, 6 INCHES ABOVE COUNTERTOP, OR AT HEIGHT INDICATED ON PLAN, WITH
<br />3/4" CONDUIT TO 6" ABOVE ACCESSIBLE CEILING.
<br />d
<br />TELEPHONE/DATA OUTLET, 4" X 4" OUTLET BOX WITH A 1 GANG COVER WITH (1) 3/4"
<br />CONDUIT TO 6" ABOVE ACCESSIBLE CEILING. DEVICE TO BE 18" AFF OR AS NOTED.
<br />TELEPHONE/DATA OUTLET, 4" X 4" OUTLET BOX WITH A 1 GANG COVER WITH (1) 3/4"
<br />CONDUIT TO 6" ABOVE ACCESSIBLE CEILING. DEVICE TO BE 48" AFF, 6" ABOVE
<br />DESK/COUNTERTOP, OR 2" ABOVE COUNTERTOP BACKSPLASH AS REQUIRED BY CONDITION,
<br />OR AS NOTED.
<br />TV
<br />FLUSH OUTLET BOX AND TELEVISION COVERPLATE 48 INCHES ABOVE FINISHED
<br />FLOOR, 6 INCHES ABOVE COUNTERTOP, OR AT HEIGHT INDICATED ON PLAN, WITH
<br />3/4" CONDUIT TO 6" ABOVE ACCESSIBLE CEILING.
<br />0
<br />CONNECTION TO FRACTIONAL HORSEPOWER ELECTRIC MOTOR.
<br />P
<br />PHOTOELECTRIC CELL. MOUNT NORTH FACING ON PARAPET WALL. PROVIDE TORK #2101
<br />ILCI ELECTRICALLY HELD LIGHTING CONTACTOR.
<br />FAI
<br />S®
<br />SURGE SUPPRESSOR
<br />❑'
<br />NON —FUSIBLE DISCONNECT SWITCH IN NEMA-1 ENCLOSURE.
<br />PROVIDE NUMBER OF POLES AS REQUIRED,
<br />VOLTAGE RATING AS REQUIRED. 3R INDICATES NEMA-3R ENCLOSURE.
<br />FUSIBLE DISCONNECT SWITCH IN NEMA-1 ENCLOSURE.
<br />PROVIDE NUMBER OF POLES AS REQUIRED, FUSE SIZE AS INDICATED,
<br />VOLTAGE RATING AS REQUIRED. 3R INDICATES NEMA-3R ENCLOSURE.
<br />O
<br />SECURITY SYSTEM OUTLET. NUMERAL IDENTIFIES OUTLET. SEE SECURITY SYSTEM BOX LEGEND.
<br />Ol
<br />DRAWING NOTES SYMBOL
<br />ASTB
<br />ALARM SYSTEM TERMINAL BOARD
<br />EC
<br />EMPTY CONDUIT WITH PULLCORD
<br />FPN
<br />FUSE PER NAMEPLATE
<br />GFI
<br />GROUND FAULT INTERRUPTER
<br />IG
<br />ISOLATED GROUND
<br />MTB
<br />MAIN TELEPHONE TERMINAL BOARD
<br />NF
<br />NON —FUSED
<br />NL
<br />NIGHT LIGHTING
<br />STB
<br />SATELLITE TERMINAL BOARD
<br />WP
<br />WEATHERPROOF
<br />NATIONAL SALES CONTRACT: ALL LIGHTING FIXTURES, PANELBOARDS,
<br />DISCONNECT SWITCHES, CONTACTORS, AND SIMILAR EQUIPMENT SHALL
<br />BE PURCHASED THROUGH WACHOVIA NATIONAL SALES CONTRACT.
<br />CONTACT ERIC SWANN (704-587-4025/eric.swannOgexpro.com) OR
<br />ERICA BRAWLEY (704-587-4018/Erica.Brawley®gexpro. com) AT
<br />GEXPRO SUPPLY IN CHARLOTTE, NC FOR PRICING.
<br />OWNER REVISIONS 07/17/09
<br />ARCHITECTURAL ENGINEERING INCORPORATED
<br />3442 EAST LAKE ROAD, PALM HARBOR, FL 34685
<br />CONSULTING ENGINEERS (727) 784-1472
<br />CERTIFICATE OF AUTHORIZATION: FL 3886
<br />W. RONALD MCILVEEN FL PE 30270
<br />ELEMENTS State License #AA0002341
<br />PARCEL
<br />US ROUTE 301
<br />ZEPHYRHILLS, FLORIDA
<br />Droving No./Dote 02.055.0
<br />PROD NO. 0I--071 , 081: 26
<br />Drowin Titie/Scole/Drown by 'SEE
<br />ELECTRICAL
<br />LECEND,NOTES,SCHE.DU ._E.S
<br />SCALE:I~ ONE
<br />
|