PROJECT SPECIFICATIONS
<br />PROJECT SPECIFICATIONS
<br />I. Keys - void construction keying or change out cylinders that utilize construction keying.
<br />081416 FLUSH WOOD DOORS
<br />1. Provide aluminum wall mullion end caps to match the color of existing window mullions
<br />13 49 `13 INTEGRATED X-RAY SHIELDING ASSEMBLIES
<br />Deliver at Date of Substantial Completion to Owner's Representative keys with each tagged
<br />A. Industry standards are those of the National Wood Window and Door Association (NWWDA)
<br />where partitions terminate at window mullions.
<br />00 21 13 INSTRUCTIONS TO BIDDERS
<br />00 50 00 GENERAL CONDITIONS
<br />indicating lock which key operates.
<br />and the Architectural Woodwork Institute (AWI). Fire -rated wood doors shall bear label of
<br />SECTION INCLUDES:
<br />Th inn f eq pe p
<br />e to t o this Bid r .nest is to obtain an offer to rform work to com lete a buildout located at
<br />. "
<br />"The n r I
<br />Ge e a Conditions o#.the Contract for Construction , AIA Document A201, 2017 edition, of
<br />testing and approval by independent testing agency, having been tested in accord with UBC
<br />Execution: Install framing at indicated spacing, plumb and rigid do accord with ASTM
<br />A. Construction of lead enclosure around x-ra treatment rooms and control rooms.
<br />Y
<br />the address listed n he cover sheet f r
<br />a t o a Stipulated Sum contract, in accordance with the
<br />the Amerran Institute of Architects, is hereby made a part of these Documents to the same
<br />FOR THE FOLLOWING MATERIAL SPECIFICATIONS, FOLLOW MANUFACTURERS
<br />7-2-1997 or UL 10-Gfor ratings fidicated.
<br />C754. Apply wallboard and fasten at intervals recommended by wallboard manufacturer.
<br />B. Lead sheet a lied to sum board.
<br />PP 9YP
<br />Contract Documents.
<br />extent as if,herein written out in full
<br />PRODUCT LITERATURE, SPECIFICATIONS, AND WRITTEN INSTRUCTIONS ON
<br />Apply embedding, filing and finishing coats of joint compound to all joints, with joint tape in
<br />C. Radiation treatment room view window frames.
<br />INSTALLATION UNLESS OTHERWISE NOTED.
<br />B. Door core: particleboard core wood doors. minimum five-ply,1-3/4" thickness. Core shall
<br />the embedding coat. Install sound attenuation blankets where indicated. Partitions
<br />D. Leaded glass.
<br />BID SUBMISSION
<br />have min. 28 pef density. Facing: shall be stain or paint grade birch "stained & paint as
<br />receiving sound attenuation blankets shall have acoustical sealant around perimeter of
<br />A. Bids signed and under seal, executed, and dated will be received at the office Sage Dental, as
<br />0120 00 PRICE AND PAYMENT PROCEDURES
<br />02 4100 BUILDING DEMOLITION
<br />indicated on drawings". Sizes: as indicated on drawings. Warranty: shall be lifetime for
<br />partition and penetrations on both sides of partition.
<br />LEAD SHEET AND ASSOCIATED MATERIALS
<br />noted in your bid solicitation documentation.
<br />" p
<br />A. Applications for Payment shall utilize AIA G702, Application and Certificate for Payment
<br />A. Regulatory: Conform to applicable codes for demolition of structures, safety of adjacent
<br />warpage, twist, delamination, and manufacturer's defects.
<br />A. Lead Sheet: ASTM B749, UNS Number L50049,1/32 inch minimum thickness.
<br />B. Offers submitted after the above time shall be returned to .the bidder unopened.
<br />including required continuation sheets. Data from the approved Schedule of Values shall be
<br />structures, noise control, and dust control. Obtain required permits, notify affected utility
<br />09 31 10 Porcelain Tile
<br />B. Gypsum Board: ASTM C1396/C1396M, paper/paper faced, square edges and square
<br />C. Amendments to the submitted offer will be permitted if received in writing prior to bid closing
<br />used.
<br />companies and comply with their requirements, conform to regulatory procedures when
<br />C. Lead Lined Doors: Equivalent to type, with bonded structural composite lumber core
<br />A. Install porcelain file per the TCA installation guidelines (Handbook for Tile Installation).
<br />ends; 48 inch by 96 inch size, 5/8 inch thick.
<br />and if endorsed by the same party or parties who signed and sealed the offer.
<br />hazardous or contaminated materials are discovered, and do not close or obstruct roadways
<br />(SCLC)
<br />Install tile only on sound substrates, maintaininig exposed surfaces free of setting
<br />C. Nails: Lead headed to twice thickness of sheet lead.
<br />B. Submit three copies of each application.
<br />without permits.
<br />with continuous lead sheet from edge to edge in center of core or between crossband and core;
<br />materials.
<br />CONTRACT TIME
<br />lead thickness.
<br />LEAD -LAMINATED GYPSUM BOARD
<br />A. Identify Contract Time in the Bid Form. The completion date in the Agreement shall be the
<br />C. When Architect or Owner's Representative requests substantiating information, submit data
<br />B. Cease operations immediately if hazardous or contaminated materials such as asbestos or
<br />B. Install a asion 'oints with sealant not less than 114 inch wide where tile work abuts
<br />xP 1
<br />A. Lead -Laminated G sum Board: Sin le un ierced la er of sheet lead com I 'n with
<br />YP 9 P Y P Yi 9
<br />Contract Time added to the commencement date.
<br />'ust' in dollar amounts in uestion.
<br />i �Y 9 4
<br />of chlorinated bi hen I PCB not reviousl rendered harmless are encountered contact
<br />P Y P Y { ), P Y
<br />D. Astra als for Non -Rated Double Doors: Steel T sha ed overla in and recessed at face
<br />9 P � PP g
<br />rests inin su
<br />a g rfaces such as perimeter walls, vurbs, .columns,. pipes, etc.
<br />ASTM B749 laminated to back of gypsum board complying with ASTM �C1396/C1396M;
<br />Architect and Owner in writing. Do not resume operations until directed, hazardous or
<br />edge.
<br />provide gypsum wall panel with fire resistant core, Type X, and surfaced with paper on
<br />INQUIRIES/ADDENDA
<br />D. Submit to the Architect or Owner's Representative for review and approval a Schedule of
<br />contaminated materials have been rendered harmless, and conditions are agreed to by Owner
<br />C. Mortar shall be latex-portland cement for this setting and shall comply with ANSI
<br />front, back, and long edges; UL rated.
<br />A. Direct questions to Tim Engelbert, email; tengelbert@randallpaulson.com
<br />Values, at least ten days prior to submitting first Application for Payment, utilizing AIA Document
<br />and Contractor in writing.
<br />E. Astragals for Fire -Rated Double Doors: Steel, T shaped, overlapping and recessed at face
<br />A118.5. For tiles larger than 14 inch by 14 inch, shall be medium bed latex-portland
<br />1. Size: 48 inch wide b her ht as indicated.
<br />Y 9
<br />B. Addenda may be issued during the bidding period. All Addenda become part of the Contract
<br />G703, "Continuation Sheet".
<br />edge, specifically for double doors.
<br />cement for medium=setting and shall comply with ANSI A118.15.
<br />2. Gypsum Board Thickness: 5/8 inch, minimum.
<br />Documents. Include resultant costs in the Bid Amount.
<br />C. Preparation: Provide and maintain temporary barriers and security devised as required to
<br />3. Lead Thickness: 0.0156 inch, minimum.
<br />C. Verbal answers are not binding on any party.
<br />E. Use Project Specification headings as basis for format for listing costs of work under Divisions
<br />protect property and people and to meet the requirements of the General Conditions. Protect
<br />F. Execution: install doors in respective frames using specified hardware. Doors shall operate
<br />D. Grout (coloras indicated on drawings):
<br />D. Clarifications re uested b bidders m t i
<br />q y us be n writing not less than 5 days before date set for
<br />02 - 49. Additional breakdown of work in certain sections ma also be sourced or re uired.
<br />Y P q
<br />existin landsca in a urtenances and structures that are not to be demolished. Prevent
<br />9 P g� PP
<br />without bindin or stickin at frames or floor. Maintain NWWDA and NFPA Na 80 standard
<br />g g
<br />1. Grout for r I in it h II
<br />po ce a t e s a be latex -modified cement, on accordabce with ANSI A118.7
<br />FABRICATION
<br />receipt of bids. The reply will be in the form of an Addendum, a copy of which will be forwarded
<br />movement or settlement of adjacent structures. Provide bracing and shoring. Mark location
<br />tolerances.
<br />2. Epoxy grout where indicated on drawings and shall comply with ANSI 118.3.
<br />A. Laminated Panels: Fabricate with monolithic sheet lead bonded between two sheets of
<br />to known recipients.
<br />of utilities.
<br />plywood; extend lead sheet 1 inch beyond one side and one end of panel perimeter.
<br />0130 00 ADMINISTRATIVE REQUIREMENTS
<br />G. Submit shop drawings indicating door species, finish, sizes, construction, and hardware
<br />E. Wet Areas (refer to TCA Installation Guidelines):
<br />B. Lead Laminated Gypsum Board: Fabricate with monolithic sheet lead bonded to one
<br />PRODUCT/ASSEMBLY/SYSTEM SUBSTITUTIONS
<br />A. Contractor shall schedule and administer pre -construction meeting, periodic progress
<br />D. Requirements: Minimize interference with adjacent structures and public or private access.
<br />locations.
<br />1. General wet areas on elevated slabs: Membrane shall meet ANSI 118.10 and have a
<br />surface of board, extend lead sheet 1 inch be and one side and one end of board.
<br />Y
<br />A. Substitute products will be considered if submitted as an attachment to the Bid Form. Approval
<br />meetings, and specially called meetings throughout the work progress.
<br />Maintain protected egress and access at all times. Obtain written permission from adjacent
<br />minimum thickness of 30 mil.
<br />to submit substitutions prior to submission of bids is not required.
<br />property Owners when demolition equipment will traverse or infringe upon their property.
<br />08 3100 ACCESS DOORS
<br />COMPONENTS AND ACCESSORIES
<br />B. In mi i n
<br />sub ss o of subs ituti ns r
<br />t o to oducts ifi i r
<br />s ec ed b dde s sh II in I i
<br />a c ude n their bid all than es
<br />P p g
<br />B. Re resentatives of contractor subc ntrac n li r h
<br />p o tors, a d supp e s s all attend on an as needed
<br />Cease operations immediately if adjacent structures appear to be in danger, contact Architect
<br />A. Non -rated flush. type access doors with trimless frames for tile, walls and ceiling shall be
<br />D. Extra Materials: furnish extra materials in fill -sized tiles, matching installed the in a
<br />A. Leaded Glass: ASTM C1036, clear, lead content equivalent to protection requirements
<br />r uired in the work and khan es to Contract Time and Contract Sum to accommodate such
<br />� 9
<br />basis. Contractor shall re area enda for meetin s make h si I rr m n r
<br />p p g g , p y ca a ange a ts, p estde,
<br />and authority having jurisdiction, do not resume operations until directed. Provide hoses .and
<br />Karp Associates Inc. or equivalant. The frame shall be 16 gauge steel, the door shall be 14
<br />quantity equal to 2 /o percent of the amount of each the type. installed.
<br />of adjacent lead sheet protection.
<br />substitutions. A later claim by the bidder for an addition to the Contract Time or Contract Sum
<br />record minutes, and distribute copies of minutes within three days to those in attendance, those
<br />water connection to sprinkle demolition area with water to minimize dust.
<br />gauge steel with continuous piano hinge spring type closer. Provide a flush screwdriver
<br />B. View Window Frames: Provide size as indicated in drawings.
<br />because of changes in work necessitated by use of substitutions shall not be considered.
<br />affected by decisions, the Owner's Representative, and the Architect, if he is involved during the
<br />operated locking, baked on enamel primer, size 8" by 8" minimum or as indicated on drawings..
<br />09 5100 ACOUSTICAL CEILINGS
<br />C. Radiation Protection Plaque: Wall mounted, designating lead thickness in wall, degree
<br />C. The submission shall provide sufficient information to determine acceptability of such products.
<br />construction.
<br />A. Install acoustical tile ceilings in compliance with ASTM C636. Secure hanger wires to
<br />of continuity, exceptions.
<br />D. Provide complete information on required revisions to other work to accommodate each
<br />0610 00 ROUGH CARPENTRY
<br />B. Fire -rated flush type access doors with trimless frames for tile, walls and ceiling shall be
<br />structure above with double saddle ties and limit to no more than 1/360 of span of
<br />proposed substitution.
<br />C. Owner and Architect may attend meetings to ascertain work is expedited consistent with
<br />A. Light framing lumber, 2" to 4" thick by 2" to 6" wide, shall be STANDARD grade, for
<br />Karp Associates Inc. or equivalant. Match adjacent construction up to 1-1/2 hr. wall and 3 hr.
<br />members. Support free edges of ceiling tile with edge angles attached to suspension
<br />INSTALLATION - COMPONENTS AND ACCESSORIES
<br />E. Provide products as specified unless substitutions are submitted in this manner and accepted.
<br />Contract Documents and construction schedules.
<br />blocking, bracing, and nailers.
<br />ceiling. The frame shall be 16 gauge steel and the door shall be 14 gauge steel with a core of
<br />system.
<br />A. Install components and accessories in accordance with manufacturer's instructions.
<br />mineral -fiber insulation enclosed in sheet metal and a continuous piano hinge spring type
<br />B. Install lead lined glazed frames as specified in section where frames are specified and
<br />SUBMISSION PROCEDURE
<br />D. Contractor shall apply Contractor's stamp, signed or iniitialed in blue ink, certifying that review,
<br />B. Provide concealed blocking, nailers, and supports for securing applied f xtures and fittings;
<br />closer. Provide a self-latc ping bolt operated by a flush screwdriver with interior release. Door
<br />B. Standard acoustical ceiling panels shall USG interiors Inc., Non -directional fissured
<br />in
<br />A. Bidders shall be solely responsible for the delivery of their bids in the manner and time
<br />approval, verification of products required, field dimensions, adjacent construction work, and
<br />specific items to be indicated on the drawings.
<br />to be baked on enamel primer and size 8" by 8" minimum or as indicated on drawings.
<br />design, size 24" by24" or 24" by 48", 5/8" thickness, tegular edges, color white, unless
<br />accordance with lead lining fabricator`s 'instructions.
<br />prescribed.
<br />coordination of information is in accordance with the requirements of the work and contract
<br />otherwise scheduled on drawings.
<br />C. Install lead lined doors as specified in the section where the doors are specified;
<br />B. Submit one copy of the executed offer on the Bid Forms provided, signed and sealed in a
<br />documents.
<br />C. Backboards at phone equipment shall be painted, 3 /4" fire treated plywood.
<br />08 7100 DOOR HARDWARE
<br />coordinate installation of door hardware.
<br />closed opaque envelope, clearly identified with bidder's name, project name and Owner's name
<br />All Exterior and interior doors shall comply with 2021 NFPA 101 Life Safety Code Florida
<br />C. Exposed ceiling suspension grid system shall be in heavy duty, 24" by 24" or 24" x 48"
<br />D. Install lead lined panels as indicated.
<br />on the outside.
<br />E. Submit sufficient quantities of project data and shop drawings for Architect or Owner's
<br />D. Nailing schedule shall be in accord with current edition of International Building Code.
<br />Specific Admendments. Doors shall be provided with handicap accessible hardware including
<br />module as indicated on drawings, cold -rolled steel, electro-galvanized, double web,15116"
<br />C. Improperly completed information, irregularities in bid bond, may be cause not to open the Bid
<br />Representative to retain two copies and for one copy to be retained by Contractor and turned
<br />levers, panic hardware, u-shape designed devices, closers, etc.
<br />flange width,1-112" height main tees, with low gloss, white paint. Edge molding minimum
<br />FIELD QUALITY CONTROL
<br />Form envelope and declare the bid invalid or informal
<br />over to the Owner at the completion of the Project.
<br />06 20 00 FINISH CARPENTRY
<br />0.020" thickness steel with 3/4" flange width, hemmed edge.
<br />A. Inspection and testing will be performed by a licensed radiologist technician in
<br />A. Not used
<br />coordination with regulatory agency requirements, to ascertain compliance of installation
<br />BID INELIGIBILITY
<br />F. Submit sufficient quantities of samples for Architect or Owner's Representative to retain one
<br />A. Coordinate and install millwork provided by Tenant, and as indicated on drawings.
<br />D. If applicable, Provide foam or neoprene spacers in space between top of partition and
<br />regarding radiation passage or leakage.
<br />A. Bids that are unsigned, improperly signed or sealed, conditional, illegible, obscure, contain
<br />copy. Review of submittals is only for conformance with design concept of Project and
<br />B. Obtain each type of hardware from a single manufacturer. Hardware suppliershall be a
<br />ceiling at ceiling height sound walls.
<br />arithmetical errors, erasures, alterations, or irregularities of any kind, may at the discretion of the
<br />information in Contract Documents.
<br />B. Qualifications: Installer must have a minimum of five years experience in the same field
<br />recognized architectural door hardware supplier that employs an experienced architectural
<br />DIVISIONS 21, 22, & 23 MECHANICAL AND ELECTRICAL
<br />Owner, be declared unacceptable.
<br />and be able to demonstrate successful projects that meet the specified AWI grade.
<br />hardware consultant (AHC) who is available to Owner, Architect, and Contractor for
<br />A. See engineering drawings for specifications.
<br />B. Bid Forms, Appendices, and enclosures that are improperly prepared may, at the discretion of
<br />G. Maintain an orderly f le of submittals bearing the Architect's or Owner's Representative's
<br />consultation. Submit proposed hardware schedule developed by AHC organized into hardware
<br />09 65 00 RESILIENT FLOORING
<br />Owner, be declared unacceptable.
<br />review stamp for the Project duration at Project site and deliver to Owner as part of Project
<br />C. Source Quality Control: Obtain materials for each type, including veneer doors, from a
<br />sets for each door or opening to Owner's Representative for review and approval prior to
<br />A. Do not start work until work of other trades, including painting, has been substantiall Y
<br />C. Bids are by invitation, only from selected bidders. Bids from unsolicited bidders may be
<br />closeout documents.
<br />single manufacturer or source so as to ensure matching of quality, color, grain, and finish.
<br />ordering hardware.
<br />completed. Flooring shall be installed prior to the installation of millwork or casework.
<br />returned.
<br />H. Maintain at the site for the Owner, one record copy of drawings and specifications, addenda,
<br />D. Quality standards for the following types of architectural woodwork, "Premium Grade"
<br />C. Material and finishes: Coordinators - 600 (USP), Other items 630 (US32D) or 626 (US26D)
<br />B. Resilient tile flooring materials shall be installed with adhesives, as recommended by
<br />FEES FOR CHANGES IN THE WORK
<br />change orders, construction change directives, approved shop drawings, product data, and
<br />except as modified, as follows:
<br />if not commercially available.
<br />the tile manufacturer, and in a manner to produce a smooth and even finished surface
<br />A. Include in the Bid Form, the overhead and profit fees on own Work and Work by
<br />samples, field test reports, and RFI documents.
<br />with tile in tight jointed accurately aligned manner. All in accordance with manufacturer's
<br />subcontractors, applicable for Changes in the Work, whether additions to or deductions from
<br />1. Standing trim, running trim, and rails: AWI Section 300, Custom Grade.
<br />D. Warranty door hardware for one-year period and door closers for ten-year period.
<br />directions.
<br />the Work on which the Bid Amount is based.
<br />I. Store in Contractor's field office in file cabinets or racks for storage of documents. Using
<br />record documents for construction purposes is prohibited. Label each document "PROJECT
<br />2. Architectural cabinets, laminate dad: AWI Sections 400 for Flush Overlay and 400B,
<br />E. Hinges, provide full mortise hinges, heavy duty ball bearing butts with non -rising stainless
<br />C. Lay tile square with room axis, unless noted otherwise on the drawings. Lay edge tiles
<br />BID FORM SIGNATURE
<br />RECORD" in neat large printed letters.
<br />Premium Grade.
<br />steel pins, exterior doors non -removable pins, 4112" by 41/2" unless otherwise required for
<br />of same style as field with width varying to maintain full size tiles in field. Edge tiles shall
<br />A. The Bid Form shall be signed by the bidder, as follows:
<br />proper operation, 3 hinges per door leaf minimum, Continuous hinge to be placed on doors
<br />not be smaller than half the width of the field tile.
<br />1. Sole Proprietorship: Signature of sole proprietor in the presence of a witness who
<br />J. If applicable, on drawings legibly mark to record actual construction including depth of
<br />3. Architectural cabinet tops: AWI Sections 400 for High Pressure Decorative Laminate tops
<br />4'-0" wide and over doors. Aluminum hinge at all non -rated doors, stainless steel hinge at
<br />will also sign. Insert the words "Sole Proprietor" under the signature. Affix seal.
<br />foundations, vertical and horizontal locations of underground utilities, field changes of dimension
<br />and 400C, Custom Grade.
<br />rated doors. Acceptable manufacturers are Hager Hinge Company, Lawrence Brothers,
<br />D. Just prior to final completion, apply wax as recommended by the manufacturer.
<br />2. Partnership: Signature of all partners in the presence of a witness who will also sign.
<br />or detail, and any other changes including change orders.
<br />Stanley Works and Marker Products,100/300 series. Overhead door stops to be Glynn-
<br />Machine buff floors for final inspection.
<br />Insert the word "Partner" under each signature. Affix seal to each signature.
<br />4. Shelving: AWI Section 600, Custom Grade.
<br />Johnson or equal.
<br />3. Corporation: Signature of a duly authorized signing officer(s) in their normal
<br />E. Extra Materials: Furnish not less than one box for each 40 boxes for each type, color,
<br />signatures. Insert the officer's capacity in which the signing officer acts, under each
<br />01 3216 CONSTRUCTION PROGRESS SCHEDULE
<br />5. Paneling: AWI Section 700
<br />F. Lock cylinders and keying, supplier will meet with Owner to finalize keying requirements.
<br />pattern and size installed. I less than 40 boxes installed, supply one box of each.
<br />signature. Affix the corporate seal. If the bid is signed by officials other than the
<br />A. Promptly after award of Contract, Contractor shall prepare and submit to Architect or Owner's
<br />Master key the locks to Owner's current or new system. Cylinders shall be manufacturer's
<br />president and secretary of the company, or the president/secretary/treasurer of the
<br />Representative estimated construction progress schedules for construction activities.
<br />6. Miscellaneous ornamental items: AWI Section 700.
<br />standard 6-pin tumbler cylinders, constructed from brass/bronze, stainless steel or nickel silver.
<br />09 66 00 RESILIENT SHEET FLOORING
<br />company, a copy of the by-law resolution of their board of directors authorizing them to
<br />Furnish 2 change keys for each lock and 6 master keys.
<br />A. Do not start work until work of other trades, including painting, has been substantially
<br />do so, must also be submitted with the Bid Form in the bid envelope.
<br />B. Progress schedules shall include complete sequence of activity, dates for beginning and
<br />7. Stile and rail doors: AWI Section 1400.
<br />completed. Flooring shall be installed prior to the installation of millwork or casework.
<br />4. Joint Venture: Each party of the joint venture shall execute the Bid Form under their
<br />completion of each element; show accumulated percentage of each item's completion and total
<br />G. Locksets, latchsets, and specialty locks shall be Best 9k, heavy-duty commercial cylindrical
<br />respective seals in a manner appropriate to such party as described above, similar to
<br />percentage of work completed.
<br />8. Factory Finishing: AWI Section 1500.
<br />type, 2 3/4" backset. Lever to be Best 14D. Furnish locksets and latchsets with sufficient
<br />B. Resilient sheet flooring materials shall be installed with adhesives, as recommended by
<br />the requirements of a Partnership.
<br />strike lip to protect door trim. Other acceptable manufacturers are Schlage, Russwin/Corbin,
<br />the tile manufacturer,'and in a manner to produce a smooth and even finished surface
<br />C. Submit initial schedule with 15 days of Contract award. Submit revisions as needed to show
<br />E. Comply with applicable AWI quality standards. Field verify all dimensions for accurate fit.
<br />and Sargent and Company.
<br />with tight, heat -welded joints, in an accurately sligned manner per the manufacturer's
<br />SELECTION AND AWARD OF ALTERNATES
<br />major changes inscope or other identifiable changes.
<br />directions.
<br />A. Bids will be evaluated on the total of the base bid price and all of the Alternates. After
<br />F. Wood Treatment: Where fire -retardant treated woodwork is indicated, use approved fire-
<br />H. Surface mounted door closers shall be LCN Closers, 401 Or series. Provide closers as shown
<br />.
<br />determination of the successful bidder, consideration will be given to which Alternates will be
<br />D. Contractor shall submit samples, shop drawings, and product data to Architect or Owner's
<br />retardant treatment that will not adversely affect the desired finish and appearance.
<br />on door schedule. Powder coat finish to match adjacent door hardware.
<br />C. Edging strips shall be installed at exposed edges of resilient sheet flooring and at doors
<br />included in the Work.
<br />Representative as required by the specification sections below. ,
<br />where thresholds are not called out for/
<br />G. Project Conditions: Stabilize humidity and temperature at normal operating conditions at
<br />I. Stops and Holders: overhead door stop shall be Glynn -Johnson series 90 and/or 100, wall
<br />ACCEPTANCE OF OFFER
<br />least seven (7) days prior to installation and thereafter.
<br />stop to be Burnes 565 and floor stop to be 535. Where practical use wall stops unless noted
<br />D. Resilient base to be installed in compliance with manufacturer's recommendations.
<br />A. Owner reserves the right to accept or reject any or all offers.
<br />0140 00 TESTING LABORATORY SERVICES
<br />otherwise on drawings. Other acceptable manufacturers are Rockwood Manufacturing and
<br />B. After acceptance by Owner, Architect on behalf of Owner, will issue to the successful bidder, a
<br />A. Contractor shall employ and pay for services of independent testing laboratory acceptable to
<br />H. Installation: Meet AWI standards for premium construction for tolerances. Scribe and cut
<br />H.B. Ives. Provide stops at all doors.
<br />E. Flash cove base to be 6" high with top edge strip and made from a minimum of 12 inch
<br />written Bid Acceptance.
<br />Architect or Owner's Representative to perform specified services and testing.
<br />work to fit adjoining work, refinish cut surfaces and repair damaged finish at cuts. Anchor
<br />wide strips. Use premanufactured cove strip at base of cove. Cap top of formed cove base
<br />casework to anchors or blocking built-in or directly attached to substrate. Secure to grounds,
<br />J. Flush bolts shall be Von Duprin 9847/9947 series with 3/4" throw, complete with dust -proof
<br />with the specified cove cap.
<br />00 50 00 CONTRACTING FORMS AND SUPPLEMENTS
<br />stripping, and blocking with countersunk concealed fasteners and blind nailing as required for
<br />bottom and top strike plate. Other acceptable manufacturers are Von Duprin, H.B. Ives and
<br />0143 30 SPECIAL INSPECTIONS
<br />a complete installation.
<br />Baldwin.
<br />F. Just prior to final completion, apply wax as recommended by the manufacturer.
<br />AGREEMENT AND CONDITIONS OF THE CONTRACT
<br />A. If required for the project, the Owner will retain the services of a qual�ed licensed Architect or
<br />A. The Agreement is based on AIA A101.
<br />Engineer to serve as'Special lnspector(s)' to perform inspections pursuant to the Statement of
<br />I. Lumber (Verify all species selections with drawings):
<br />K. Kickplates shall be Rockwood Manufacturing, K1050 series. kickplates shall not more than
<br />G. Extra Materials: Furnish not less than 5 lineal yards or 2% of total project material,
<br />B. The General Conditions are based on AIA A201.
<br />Special Inspections scheduled on the drawings. Approved Special Inspectors) shall provide
<br />1-1/2" less than door width on stop side and not more than 1/2" less than door width on pull
<br />which ever is greater. .
<br />testing and verification reports to Owner, architect, building official, and structural engineer of
<br />1. Exposed and semi -exposed painted millwork and trim: Custom Grade Poplar or Custom
<br />side. Armor plates to be shall be Rockwood Manufacturing, K105OA-6 series.
<br />FORMS
<br />record which indicate the inspected work was done in conformance with approved construction
<br />Grade White Pine, kiln dried.
<br />09 68 00 CARPET
<br />A. Use the following forms for the specified purposes unless otherwise indicated elsewhere in the
<br />documents.
<br />L. Thresholds shall be National Guard Products Inc., #425, extruded smooth mill finish. Other
<br />Submit 3 samples, minimum 12"x12" of all specified carpet finishes and manufacturer's
<br />Contract Documents.
<br />2. Interior standing and running trim: Custom Grade Poplar or Custom Grade White Pine, kiln
<br />acceptable manufacturers are Reese and Zero Weatherstripping Company. Provide at all
<br />product literature.
<br />B. Bond Forms:
<br />01 50 00 TEMPORARY FACILITIES, CONTROLS, AND UTILITIES
<br />dried. Shapes shown are by'Randall Brothers'. Install in single, unjointed lengths for
<br />exterior doors.
<br />1. Bid Bond Form: AIA A310.
<br />A. Temporary construction office - provide all temporary facilities as required to build this project
<br />openings and runs less than 16'-0". Stagger joints in adjacent members. Cope at returns,
<br />A. Carpet shall be as specified on drawings. Installation method to be direct -glued per
<br />2. Performance and Payment Bond Form: AIA A312.
<br />with sufficient space for Contractor's personnel, telephone/fax, and office space complete with
<br />miter at comers.
<br />M. Weatherstripping shall be National Guard Products Inc., #133 SA door seals and #200SA
<br />manufacturer recommendations. .
<br />C. Post -Award Certificates and Other Forms:
<br />desk and layout board.
<br />door bottom seals. Other acceptable manufacturers are Reese and Zero Weatherstripping
<br />1. Certificate of Insurance Form: ACORD Certificate of Insurance 25.
<br />J. Hardware
<br />Company. Provide at all hollow metal exterior doors.
<br />B. Fill cracks in concrete slab 1/16" wide or wider and depressions 1/8" deep or deeper
<br />a. Supplemental Attachment: AIA G715
<br />B. Temporary storage facilities - if required, provide with weathertight, secure storage sheds or
<br />1. Door and drawer pulls to be 4" matt nickel stainless steel.
<br />with crack filler. -Remove or level ridges or high spots. Lay carpet with pattern or direction
<br />2. Schedule of Values Form: AIA G703.
<br />trailers, type and size required for particular storage. Locate where directed by Owner.
<br />2. Concealed hinges to be Grade 2 (Institutional duty),170 degree opening
<br />08 80 00 GLAZING
<br />running in same direction. T-seams in doorways are prohibited.
<br />3. Application for Payment Forms: AIA G702 with AIA G703 (for Contractors).
<br />3. Drawer Slides to be full extentions slides;1001b per slide per standard drawer,1501b per
<br />Provide glazing systems capable of withstanding normal thermal movement and wind and
<br />D. Clarification and Mod cation Forms:
<br />C. Electrical service - eletrical for construction purposes may be obtained from Owner's present
<br />slide per standard file drawer and 2501b per laterial file drawer.
<br />impact loads (where applicable) without failure, including loss or glass breakage attributed to
<br />C. Carpet to carpet transitions at doors shall occur directly under door in the closed
<br />1. Architect's Supplemental Instructions Form: AIA G710.
<br />facility, coordinate with Owner's Representative. Provide temporary lighting for construction
<br />4. Door and drawer locks: provide elbow catches on un-keyed leaf of paor of doors. If
<br />the following: defective manufacture, fabrication, installation, failure of sealants or gaskets to
<br />position.
<br />2. Construction Change Directive Form: AIA G714.
<br />purposes as required by OSHA or local code.
<br />electronic push button, provide battery operated with low battery indicator,
<br />remain watertight and airtight, deterioration of glazing material and otherdefects in
<br />3. Change Order Form: AIA G701.
<br />5 Shelf standards to be same coloras cabinet interior.
<br />construction.
<br />D. Provide rubber/vinyl transition strips at all carpet to hard floor finish conditions unless
<br />E. Closeout Forms:
<br />D. Telephone/Fax - provide telephone, telephone message service and fax service to the
<br />otherwise noted. Color to match adjacent rubber /vinyl baseor, at wood base conditions,
<br />1. Certificate of Substantial Completion Form: AIA G704.
<br />temporary construction office.
<br />07 21 00 THERMAL INSULATION
<br />A. Clear wired glass:1/4" thick polished both sides, diamond mesh and listed by U.L as fire
<br />as selected by Architect from manufacturer's standard selections.
<br />2. Contractor's Affidavit of Release of Liens Form: AIA G706A
<br />A. Batt insulation shall be fiberglass batts width equal to framing spacing, kraft face, ASTM
<br />resistive.
<br />3. Consent of Surety to Final Payment Form: AIA G707.
<br />E. Temporary heat and ventilation - If a ground up building, provide temporary heat in enclosed
<br />C665, Type II, Class C,1.0 perm rating, R-13 in walls.
<br />E. Extra Materials: Furnish extra materials described below that match products installed
<br />spaces to provide 50o F. minimum until time finishing work begins. After building is totally
<br />B. Fire rated clear glass: Thickness varies - see wall rating or door label for fire rating. Ultra-
<br />and that are packaged with protective covering for storage and identified with labels
<br />enclosed and installation of finishes begins, maintain spaces in range of 60o F to 80o F, unless
<br />B. Rigid extruded polystyrene insulation shall be extruded, closed cell, CFC-12 free,
<br />clear fire rated glass laminated with intumescent intedayer. Permanent U.L label to be
<br />describing contents.
<br />product manufacturer for a particular product calls for more stringent requirements. Interior
<br />polystyrene boards meeting ASTM C578, Type IV for use in perimeter and other applications,
<br />displayed.
<br />renovation within an existing building, maintain spaces in range of 60o F to 80o F, unless product
<br />thickness 2" or as scheduled on drawings.
<br />1. Carpet: Full width rolls equal to 5 percent of amount installed for each type indicated,
<br />manufacturer for a particular product calls for more stringent requirements.
<br />C. Clear float glass:114" thick unless noted otherwise on the drawings, grade "B" fully
<br />but not less than 10 sq. yd..
<br />C. Sound insulation - refer to Section 09 21 16 Gypsum Board Assemblies.
<br />tempered, style "I" uncoated.
<br />F. Water service - water for construction purposes may be obtained from Owner's present
<br />-
<br />facility, coordinate with Owner's Representative.
<br />D. Provide continuous 1 /4" foam tape filler where walls meet window mullions. Provide
<br />D: Glass schelving: 3/8" thick, grade "B" fully tempered, style "I" uncoated with eased and
<br />09 90 00 PAINTING
<br />double foam tape fill at demising wall between tenants, intersecting partitions and demising
<br />polished edges.
<br />See drawings for information. For purpose of establishing a quality standards, Sherwin-
<br />G. Sanitary toilet facilities - provide and maintain temporary toilet facilities and enclosures for
<br />walls.
<br />Williams Company Best Grade is to be specified.
<br />construction personnel. Using permanent new or existing facilities in the builing is prohibited by
<br />E. Clear tempered float glass:1/4" or 1/2" thick polishes sides; refer to drawings for thickness.
<br />construction personnel.
<br />07 84 00 FIRE STOPPING
<br />A. Tint prime coats to 1/3 shade of top coat.
<br />Provide firestopping as required to maintain ratings at all penetrations through rated walls,
<br />Incorporate glazing tape, glazing compounds, setting blocks, spacers and glazing gaskets
<br />H. Project sign - order and erect or position sign as requested by Owner's Representative, or as
<br />partitions, floors amd floor -ceiling assemblies.
<br />recommmended or accepted by both the glass manufacturer and the manufacturer of the
<br />B. The number of coats specked are the mininum required. First coat to be primer,
<br />indicated in the Construction Documents. Coordinate location with Owner's Representative.
<br />product into which the glazing product is to be installed.
<br />second and third coat to be finish coat. The surface of all materials that are to be painted
<br />07 90 05 SEALANTS AND CAULKS
<br />shall be completely hidden. Coverage shall be complete and meet manufacturer's
<br />Exterior joints and all other openings in the building shall be caulked, gasketed,
<br />09 2116 GYPSUM BOARD ASSEMBLIES
<br />standards for finish.
<br />01 60 00 PRODUCT REQUIREMENTS
<br />weatherstripped, or sealed in an approved manner (ref. Florida Bulking Code - Engergy
<br />All gypsum board systems shall be in accordance with recommendations and instructions
<br />A. Provide new products unless specifically required or permitted by Contract Documents.
<br />Conservation).
<br />published by U.S. Gypsum Company's "Gypsum Construction Handbook", latest edition.
<br />C. Doors and frames shall be sprayed, not rolled or brushed.
<br />Seal all sound partitions with acoustical sealant at base, head, perimeter and all openings.
<br />A. Non-loadbearing metal framing materials: Metal framing shall be cold -rolled, galvanized
<br />D. Paint materials shall be applied in accordance with the manufacturer's directions on the
<br />01 70 00 EXECUTION AND CLOSEOUT REQUIREMENTS
<br />A. Silicone sanitary sealant, SSS-1, one part silicone rubber, mildew and stain resistant,
<br />steel studs and runners, stud gauge as required by manufacturer's product data for heights and
<br />container label. Materials shall be evenly spread and smoothly flowed -on without runs,
<br />A. Clean-up during construction - execute cleaning procedures to ensure building interior, project
<br />ASTM C920, Type S, Grade NS, Class 25. Use at plumbing fixture perimeters mounted on
<br />conditions of use; maximum deflection of I/240; sizes indicated.
<br />sags, dry spray or other film defects.
<br />site, and adjacent properties are maintained free from debris and rubbish. Maintain site, both
<br />walls and top and edges of backsplashes at countertops.
<br />exterior and interior, in clean and orderly condition. Provide covered, on -site containers for
<br />B. Gypsum board: Exterior gypsum sheathing shall be moisture and fire resistant type,
<br />E. Extra Materials: Supply for each finish coating material, color and finish specified, one
<br />waste collection.
<br />B. Two-part non -sag polyurethane sealant, PSV2-1, two-part polyurethane based sealant with
<br />thickness as indicated, with square edges. Standard gypsum board shall be 5/8" thickness,
<br />gallon of coating material, marked with color and finish identification.
<br />separate prepackaged color agent to achieve colors, ASTM C920, Type M, Grade NS, Class
<br />tapered edges. Fire retardant gypsum board shall be Type'X', 5/8" thickness, tapered edges.
<br />B. Final cleaning - clean finish surfaces in accord with manufacturer's product data and
<br />25. Use at exterior and interior door and window frames perimeter.
<br />Provide Dens -Shield DS012 gypsum board (or equal) at all non -tile wet walls. Provide Dens-
<br />10 26 00 WALL PROTECTION SYSTEM
<br />requirements specified in sections not more than 48 hours prior to Date of Substantial
<br />Shield DS001 gypsum board (or equal) at all wet walls to receive ceramic tile. Minimize butt
<br />A. Products to be specified are by Construction Specialties unless noted otherwise.
<br />Completion. Remove dust, debris, oils, stains, fingerprints, and temporary labels from exposed
<br />C. Acrylic -latex caulk, ALCA, flexible paintable, non -staining, non -bleeding acrylic emulsion,
<br />end joints, especially in highly visible locations. Use screws for attachment of all gypsum
<br />interior and exterior finish surfaces, include washing and polishing interior and exterior glazing
<br />ASTM C834. Use at interior non -working cosmeticjoints between similar and dissimilar
<br />board.
<br />B. Corner Guards to be surface mounted consisting of snap -on plastic cover installed over
<br />materials, vacuum carpeted and.soft surfaces. Broom clean paved surfaces. Install new clean
<br />adjacent materials.
<br />continuous extruded aluminum retainer. Extruded plasrtic to be a minimum of 0.078 inch
<br />set of HVAC system filters not more the 48 hours prior to Date of Substantial Completion. Clean
<br />C. Acoustic partitions: 3 5/8" x 20 GA metal studs at 16" o.c. with denim batt acoustic
<br />wall thickness. Mounting height shall start on top of base and continue up to 5'-0" aff.
<br />plumbing fixtures. Replace used lamps and bulbs and clean lighting fixtures to "like -new"
<br />D. Butyl caulk, BC-1, one part butyl rubber caulk, ASTM C1085, black. Use continuous
<br />insulation. Sheath with 1/2" sound board with applied mass loaded vinyl sound barrier adhered
<br />condition.
<br />double bead at sill or threshold of exterior swinging doors.
<br />with Green glue. Provide 314" gypsum wall board metal clips @ 16" on center, horizontal,
<br />C. Chair rail to be extruded rigid plastic with a minimum of 0.078 inch wall thickness.
<br />screwed to mass loaded vinyl. Overlay with 5/8" gypsum wall board applied to dips, provide
<br />C. Submit operation and maintenance manuals - submit at issuance of Date of Substantial
<br />E. Backer rod, compressible rod stock closed cell foam, open cell foam, soft cell foam, or
<br />level 5 finish.
<br />D. Wall Protection Panels to be semirigid panel with a minimim sheet size of 48 inches by
<br />Completion or 15 days prior to final inspection whichever date is earlier. Submit in duplicate, in 8
<br />neoprene foam, type recommended by sealant manufacturer for material compatibility and
<br />96 inches by 0.040 inch sheet thickness.
<br />112" x 11 inch format in D size ring binders with plastic covers. Internally divide with permanent
<br />conditions encountered.
<br />D. Acoustic ceilings: 6" x 20 GA metal joists, or as otherwise indicated on drawings at 16" o.c.
<br />page dividers logically organized. Include:
<br />with denim batt acoustic insulation. Sheath with 1/2" sound board with applied mass loaded
<br />10 28 00 TOILET AND BATH ACCESSORIES
<br />081100 STEEL DOORS AND FRAMES
<br />vinyl sound barrier adhered with Green glue. Provide 3/4" gypsum wall board metal dips @
<br />A. Products specified are by Bobrick Washroom Equipment Inc. Acceptable
<br />1. Part 1- Directory: list names, addresses, telephone numbers of Architect, Contractor,
<br />A. Exterior steel doors and frames to be Building Standard.
<br />16" on center, horizontal, screwed to mass loaded vinyl. Overlay with 5/8" gypsum wall board
<br />manufacturers included American Specialties Inc. and Bradley Washfountain Company.
<br />subcontractors, major equipment suppliers, and local service for major equipment.
<br />applied to clips, tape and spackle all joints. Finish with batt insulation and acoustical ceiling tile
<br />Use ANSI Type 304 stainless steel for all parts except mounting kits for grab bars.
<br />B. Materials include steel, ASTM A366, cold rolled steel sheet free of scale, pitting, or surface
<br />system as indicated on drawings.
<br />2. Part 2 - Operation and Maintenance Instructions: arrange by system further subdivided by
<br />defects; exterior frames and doors, ASTM A525, zinc coated, coating designation G60; and
<br />B. Toilet and bath accessories schedule: as indicated on drawings.
<br />specification section and include significant design criteria, equipment list, component parts list,
<br />primer, one coat manufacturer's standard baked -on enamel rust -inhibitive primer to pin hole
<br />E. Joint tape, perforated type recommended for board type use. Joint compound, ready mixed
<br />operating instructions, maintenance instructions, and actual
<br />free.
<br />tape embedment and topping compounds, type recommended for board type use.
<br />C. Submit catalog cuts and data sheets indicating size, material and finish, complete
<br />parts list, and installation procedures for each accessory.
<br />3. Part 3 - Project Documents and Certificates: include shop drawings and product data, air
<br />C. Frame construction shall be factory primed, pressed steel, frames for doors and other
<br />F. Sound Attenuation Blankets: for partition and ceiling cavities, sound blankets shall be
<br />balance reports, certificates, and photocopies of warranties and bonds.
<br />indicated openings. Exterior door frames shall be 16 gauge, face welded, seamless with joints
<br />unfaced mineral -fiber blanket insulation manufacturered from slag wool or rock wool with
<br />filled and weatherstripping per Section 08710. Interior frames shall be knock down "KD" type
<br />thermosetting resins to comply with ASTM C665. Blankets shall have a minimum density of
<br />10 44 00 FIRE PROTECTION SPECIALTIES
<br />D. Certificates from governing code authorities indicating construction has been inspected as
<br />frames, and 16 gauge. All frames shall have labels for labeled openings as required, with
<br />2.5 pcf,1-1/2" thickness.
<br />A. Extinguishers shall be multi -purpose dry chemical extinguisher, ten lbs., UL rating
<br />required by laws or ordinances and building is approved for occupancy.
<br />standard rubber, neoprene, or silicone silencers.
<br />4A-60B:C, with bracket supporting extinguisher top and bottom, holding extinguisher off
<br />G. Tape fill, and sand exposed joints, edges, and comers to produce smooth surface ready to
<br />finished wall surface if not located in cabinet.
<br />E. Warranties - provide executed warranty in writing, indicate Date of Substantial Completion and
<br />D. Provide manufacturer's standard frame anchors for attachment to studs at 2'-0" o.c. max or
<br />receive finishes. Feather coats of joint compound so that camber is maximum 1132 inch.
<br />warranty expiration date. Warranty period begins on Date of Substantial Completion and
<br />fraction thereof on each jamb.
<br />Surfacing material to be U.S. Gypsum Company, Sheetrock First Coat.
<br />B. Fire extinguisher cabinets shall be semi -recessed, sized to fit extinguishers, minimum
<br />continues for one year unless otherwise indicated in individual specification sections or otherwise
<br />18 gauge steel cabinet, door and trim material, prefinished white painted. Door shall be
<br />provided by individual manufacturers' warranties.
<br />E. Door construction for exterior units shall be Grade II, Heavy Duty, seamless composite
<br />H. Accessories include corner reinforcement, Unimast Inc. SHEETROCK No. 800. Metal jamb,
<br />duo vertical panel, with tempered glass, with full length piano hinge, roller catch, and pull,
<br />construction,16 gauge material, with 20 PSI compressive strength foamed -in -place
<br />ceiling and casing "U" and "J" shaped trim providing edge protection and neat finished edges,
<br />and lettering FIRE EXTINGUISHER in red pressure sensitive vinyl lettering running
<br />F. Record Documents - provide set of Record Documents with final Application for Payment.
<br />polyurethane core.
<br />Unimast Inc. SHEETROCK Trim No. 801 series. Resilient channel, Unimast Inc. RC-1
<br />vertical.
<br />Resilient Channel, 25 gauge galvanized steel.
<br />G. Tools, equipment, spare parts, extra material, and related items as required in specification
<br />F. Submit manufacturer's product data and shop drawings indicating door and frame
<br />C. Locate at 48" AFF, one per every 75 linear feet of travel distance, one per every 3,000
<br />sections at final Application for Payment.
<br />elevations, sections, materials, gauges, finishes, fabrication and erection details, location of
<br />SF, or per Fire Marshal's direction.
<br />finish hardware by dimension, and details of openings and louvers.
<br />H. Fire extinguishers - verify extinguishers are charged and ready for use, provide attached tag
<br />D. All extinguishers in finished areas shall be set in cabinets.
<br />indicating date tested and by whom.
<br />G. Provide metal drip at exterior door frames which have no altemative cover.
<br />0-15-2021
<br />Roswell Mill
<br />05-AMill Street, Suite 200
<br />Roswell, Georgia 30075
<br />t 110.650.1550 f 770.650.7559
<br />e-mail arc5itects@randallpaulson.com
<br />' 1� 1
<br />These plans and specifications are the property of Randall•Poulson Architects,
<br />Incorporated. these documents may not he copied, reproduced, used or
<br />implemented in any way, in part or in whole, without the written consent0
<br />8andalltanlsonkchitects,Incorporated. AN common law rights of copyright are
<br />horok specifically roseraed.
<br />FLORIDA REGISTRATIONNA0003296
<br />TENANT
<br />BUILD -OUT
<br />at .
<br />ZEPHYRHILLS
<br />for
<br />U.S. HIGHWAY 301 & PRETTY
<br />POND ROAD,
<br />ZEPHYRHILLS, FLORIDA 33541
<br />Print Record
<br />Revisions
<br />Date Project No.
<br />14 JUNE 2021 2021217.00
<br />Sheet Title
<br />SPECIFICATIONS
<br />Sheet No.
<br />r•
<br />■Released for Construction
<br />❑Not Released for Construction
<br />
|