6627 Fort King Rd (4) - Laserfiche WebLink

Browse Search

Gamewell FIRE CONTROL INSTRUMENTS by Honeywell Description The Gamewell-FCI Velociti® Series addressable output supervised control module (AOM-2SF) allows a Gamewell-FCI analog addressable fire alarm control panel to switch an external power supply, such as a DC supply or audio amplifier (up to 80 VRMs) to notification appliances. The AOM-2SF notification appliance circuit can be wired either Class A (Style Z) or Class B (Style Y). It also super- vises the wiring to the connected loads and reports their status to the panel as NORMAL, OPEN or SHORT CIRCUIT. The module contains a panel controlled LED. The Velociti® Series use a communication protocol that substantially increases the speed of communication between the SLC devices and certain Gamewell-FCI ana- log addressable fire alarm control panels. These devices operate in a grouped fashion. If one of the devices in the group has a status change, the panel's microprocessor stops the group poll and concentrates on the single device. The net result is a superior response speed up to five times greater than the earlier designs. The AOM-2SF module is designed for installation in the signaling line circuit of any Gamewell-FCI analog address- able fire alarm control panel. The signaling line circuits of Gamewell-FCI analog addressable fire alarm control pan- els are designed to accommodate up to 159 modules per circuit. The AOM-2SF is designed to mount in a 4" (10.16 cm) square junction box 2 1/8" (5.5 cm) deep. Table 1 lists the relay contact ratings. Current Rating Maximum Voltage Load Description Application 3A 30 VDC Resistive Non -Coded 2A 30 VDC Resistive Coded 0.9A 110 VDC Resistive Non -Coded 0.5A 125 VAC Resistive Non -Coded 0.5A 30 VDC Inductive (UR=5ms) Coded 1A 30 VDC Inductive (L/R=2ms) Coded 0.5A 125 VAC Inductive (PF=.35) Non -Coded 0.7A 75 VAC Inductive Non -Coded Table 1: Relay Contact Ratings Velociti® is a registered trademark of Honeywell International Inc. UL® is a registered trademark of Underwriters Laboratories Inc. VelocitiO Series A8111=2SF Addressable Output Relay Supervised Control Module AOM-2SF Features • Listed under ULO Standard 864 and UL2572 for Mass Notification. • Designed as a compact size to allow easy installation. • Includes Class A, Style Z, or Class B, Style Y notification appliance circuit. • Accommodates audio amplifiers up to 80 VRMs. • FM Listed as suitable for a releasing device service. • Includes a bicolor LED that flashes green whenever the module is addressed, and lights steady red upon activation. *Note: Only the red LED is operative in panels that do not operate in Velociti® mode. Specifications Supervisory Current: Alarm Current: Operating Temperature Relative Humidity: Dimensions .000375 amps .0065 amps 32' to 120' F (0' to 49' C) 10 to 93% relative humidity (non -condensing) 4 1/2" H x 4" W x 1 1/4" D (11A H x 10.2 W x 3.2 D cm) Ordering Information Part Number Description AOM-2SF Addressable output supervised control module SIGNALING &L FM MEA LISTED moo. APProv, S1949 3023594 227-03•EVoI.IV 7300-1703:0102 I IS090011 GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA - Tel: (203) 484-7161 • Fax: (203) 484-7118 Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. ©2014Honeywelllntemationallnc. Allrghtsreserved. www.gamewell-fci.com 9020-0627 Rev. G page 1 of 1