Laserfiche WebLink
<br /> <br />'~-__FfN_ <br /> <br />PERMAGUARD <br />IN~IES,INC. <br /> <br />PERMAGUARD "KOOLTILT" WINDOW SPECIFICATIONS <br /> <br />MODEL DESCRIPTIONS <br /> <br />#302: <br />#322: <br />~: <br /> <br />#343: <br /> <br />Double Hung, two vertically sliding sash <br />Two Lite Horizontal Slider, both sash operable <br />Three Lite Horizontal Slider, center sash fixed <br />with two operable sash. <br />Picture window (fixed). <br /> <br />FRAME CONSTRUCTION: All frame sections are comprised of <br />extruded poly vinyl chloride (P.V.C.) with a minimum wall <br />thickness of .070 inch. Sill sections have a wall thickness <br />of .080 inch. Sections are multi-chambered for additional <br />structural strength. The model #302 Double Hung has an <br />extruded aluminum horizontal stiffener rail with a wall <br />thickness of .050 inch which has an electrostatically applied <br />and baked on painted finish. It is fastened at the jamb <br />centers with two (2) #8 x 3/4 inch stainless steel screws. <br />The frame depth of each model is a minimum of 3 1/4 inches <br />thick, which does not include the integral screen channel. <br />Each frame corner is fastened with three (3) #8 x 1 1/2 inch <br />stainless steel screws. The sill-jamb joints are sealed with <br />a pre-formed gasket seal prior to assembly. The head-jamb <br />joints are sealed with small joint sealant after assembly. <br />The model #302 Double Hung has a hospital sill with a seven <br />(7) degree slope to the exterior for positive water drainage. <br />The model #322-#332 horizontal slider has a multi-chambered <br />internal weepage system to allow for positive water drainage. <br /> <br />SASH CONSTRUCTION: All sash sections are comprised of <br />extruded poly vinyl chloride (P.V.C.) with a wall thickness <br />of .070 inch. All model #302 Double Hung Horizontal sash <br />rails and model #322-#332 Horizontal Slider Vertical sash <br />rails are re-inforced by an extruded aluminum "I" beam, with <br />a wall thickness of .050 inch. All sash rails are notched, <br />coped, and fastened at each corner with one (1) # 8 x 1 1/2 <br />inch stainless steel screw. All sash rails are double <br />weather stripped with .187 x .250 inch extruded dual fin seal <br />weather stripping. The model #322-#332 Horizontal Slider <br />meeting rails are weather stripped with .187 x .350 inch <br />extruded dual fin seal weather stripping. The model #302 <br />Double Hung bottom sash horizontal rail is weather stripped <br />with an additional dual durameter bulb vinyl sweep. The <br />bottom horizontal sash rails of each model are weeped for <br />positive water drainage. <br /> <br />6790 118th Ave. N., Largo, FL 34643 <br />Pinellas 813-541-6648 Florida Toll Free 1-800-833-5665 <br />