Laserfiche WebLink
<br />SECTION 7 <br /> <br />ALTERNATE CONNECTION: <br />(3} #8 SCREWS PER PAN <br />WITH 1" MINIMUM <br />EMBEDMENT INTO FASCIA <br />THROUGH PAN BOXED END <br /> <br />#10 x 1-1/2" S.M,S. (1) PER <br />RAFTER OR TRUSS TAIL <br />#10 x 3/4" S.M.S. @ 12" O.C. <br /> <br /> <br />FOR MASONRY USE <br />1/4" x 1-1/4" TAP-CON ANCHOR <br />OR EQUAL @ 24" O.C. FOR <br />WOOD USE #10 x 1-1/2" S.M.S. <br />OR WOOD SCREWS @ 2" O.C. <br /> <br /> <br />XISTING HOST STRUCTURE: <br />OOD FRAME, MASONRY OR <br />OTHER CONSTRUCTION <br /> <br />NOTES: <br /> <br />SOLID ROOF PANEL PRODUCTS <br /> <br />PAN ROOF ANCHORING DETAILS <br /> <br /> <br />ROOF PANEL TO FASCIA DETAIL <br /> <br /> <br />Lawrence E. Bennett, P.E. <br />CIVIL ENGINEER - DEVELOPMENT CONSUL TANT <br />P.O. BOX 4368, SOUTH DAYTONA, FL 32121 <br />TELEPHONE (904) 767-4774 <br />FAX (904) 767-6556 <br /> <br />#8 X 1/2" S.M.S. (3) PER PAN <br />(BOTTOM) AND (1) @ RISER <br />(TOP) <br />ROOF PA~_EL TO WALL DETAIL ~' <br /> <br />ROOF PANELS SHALL BE ATTACHED TO THE HEADER WI) H (3) cACH #8 x 1/2" LONG <br />CORROSION RESISTANT SHEET METAL SCREWS WITH 1/2" WASHERS. ALL SCREW <br />HEADS SHALL BE CAULKED OR SHALL HAVE NEOPRENE GASKET BETWEEN THE <br />WASHER AND THE PAN. PAN RIBS SHALL RECEIVE (1) EACH #8 x 1/2" SCREW EACH. THE <br />PANS MAY BE ANCHORED THROUGH BOXED PAN WITH (3) EACH #8 x 1" OF THE ABOVE <br />SCREW TYPES AND THE ABOVE SPECIFIED RIZER SCREW. #8 x 9/16" TEK SCREWS ARE <br />ALLOWED AS A SUBSTITUTE FOR #8 x 1/2" S,M.S. <br /> <br />SEAL <br /> <br />PAGE <br /> <br />EXISTING TRUSS OR RAFTER <br /> <br />SEALANT <br />#8 x 1/2" S.M,S. (3) PER PAN <br />(BOTTOM) AND (1) @ RISER <br />(TOP) <br />HEADER (SEE NOTE BELOW) <br />ROOF PANEL <br /> <br />#8 x 1/2" S.M.S. (3) PER PAN <br />(BOTTOM) AND (1) @ RISER <br />(TOP) <br />EXISTING FASCIA <br /> <br />------; <br /> <br /> <br />SEALANT <br />#8 x 1/2" S.M.S. (3) PER PAN <br />(BOTTOM) AND (1) @ RISER <br />(TOP) <br />HEADER (SEE NOTE BELOW) <br /> <br />ROOF PANEL <br /> <br />@ COPYRIGHT 2000 <br />7 -2 NOT TO BE REPRODUCED IN WHOLE OR IN PART WITHOUT THE WRITTEN PERMISSION OF LAWRENCE E. BENNETT. PE <br />