Laserfiche WebLink
<br />05-30324.05 <br />Page 4 of8 <br /> <br /> Test Specimen Descr~ption: (Continued) <br /> Dra~age: <br /> Description Quantity Location <br /> 7/8" wide by 3/16" 2 One 2-1/4" from each end of the <br /> high weepslot exterior sill face (with flaps), one at <br /> each end of the center sill wall <br /> 3/4" Wide by 3/16" 2 Sill screen track, one at each end <br /> bigh weepslot <br /> 1-1/4" wide by 1/2" 2 Sill, one at each end of the interior <br />" deep weepslot jamb track <br /> 3/8" wide by 1/8" 4 Bottom sash Fail and exterior <br /> deep weepslot meeting rail, one at each end <br /> <br />Reinforcement: The lock rail contained a rectangular shaped,' formed steel reinforcement <br />measuring 0.649" x 0.461" x 0.047" (reference draWing #2707). The exterior meeting rail <br />and sash stiles contained a "U" shaped steel reinforcement measuring 0.781" x 00400" <br />x 0.047" (reference drawing # 2709). <br /> <br />Installation: The unit w~ installed in a. wood buck constructed of Spruce-Pine-Fir <br />construction lumber and sealed at the exterior perimeter with a silicone sealant. A 3/4,j x <br />3/4" wood stop was applied to the interior and exterior perimete~ and secured with 2" <br />dzywa11 screws spaced approximately 16" on center. <br />