Laserfiche WebLink
<br />. Base Sheet: <br /> <br />. Ply Sheet: <br /> <br />Membrane: <br /> <br />Surfacing: <br /> <br />\ <br /> <br />Maximum Design <br />Pressure: <br /> <br />I <br /> <br />I, <br /> <br />. ,. <br />One ply of GlasBase, FIexigIas Rae, Plexiglas FR Base, Poly SMS, Ultra Poly <br />SMS, Flintglas Ply Sheet (Type IV) or Flintglas Premium Ply Sheet (Type VI) <br />adhered to the insulated substrate with approved mopping asphah applied witbin <br />the EVT range and at a rate of 20-40 IbsJsq. <br /> <br />(Optional) One ply of GlasBase, Plexiglas Base, Plexiglas FR Base, Poly SMS, <br />Ultra Poly SMS or one or more plies of Flintglas Ply Sheet (Type IV) or FtinIgIas <br />Piemium Ply Sheet (Type VI) adhered with approved mopping asphalt.applied <br />within the EVT range and at a rate of 20-40 IbsJsq. . <br /> <br />One ply of Flinllastic OMS, Flintlastic Premium OMS, Flintlastic FR.-P, Flintlastic <br />Premium FR.-P, Ultra Poly SMS, Flexiglas Premium Cap 960, Flintlastk FR Cap <br />or Flintglas Mineral Surfaced Cap Sheet adhered to base or ply sheet ~ith <br />approved mopping asphalt applied within the EVT range and at ~ rate of 20 to 40 <br />lbs./sq. or Flintlastic GTS torch adhered to base or ply sheet <br /> <br />(Optional) Install one of the following: , <br />1. 400 lb./sq. gravel or 300 lb./sq. slag in a flood coat of approved mopping <br />asphalt at an application rate of 60 IbJsq.. <br />2. Karoak 97, FlintCoat A-ISO, APOC 212 Fibrated Aluminum, Henry 520 <br />Aluminum or Grundy AL MB at an application rate of 1 ~ galJsq., ,or APOC <br />Sunbrite at an application rate of3 gaIJsq. <br /> <br />-52.5 psf See General Limitation #9 <br /> <br />NOA. No.: 03-0S27.01 <br />Expiratioll Date: 01102108 <br />Approval Dele: 0SI06I04 <br />Page 17 of 30 <br />