Laserfiche WebLink
<br />.' <br /> <br /> <br />MATERIAL CHARACTERISTICS <br /> <br />Weepholes: <br /> <br />Lab. Nwnber 4551 <br />March 30, 2005 <br />Report Number II <br />File Number 05.116 <br />Page 2 of 4 <br />D-6985 <br /> <br />'}uanlity Description Location <br />Four 1" by 114" weepholc with plastic at frame sill, 3 1/4",4 W', 68 Y.l" and 69 3/4" from left <br /> baffles <br />Two I" by 1/8" weep slot at frame sill below vinyl track insert, 3" and 70" from left <br />Two 3/8" bv 1/8" weep slot at frame sill, 2 5/8" from left <br /> <br />Muntins: None <br />Mulltons: None <br />Reinforeemeat: One 32 ~n long aluminum reinforcement, drawing No. 5114, inside vent top and bottom rail, (total <br />of two) and one of the same except 55" long inside vent meeting rail and vent jamb rail, (total of two). One 57" long <br />aluminum reinforcement, drawing No. 5123, inside fixed meeting rail, fastened with a single row of No. 6 by \1," flat <br />head self drilling screws, 8", 14 ~", 22 W', 29 3/4",39",48" and 54 W' from bottom. <br />SeallUlts: Installation nails were sealed with a white colored seam sealer. Frame comers and fixed meeting rail seams <br />were sealed with a clear colored seam sealer. <br />Pads: None <br />Screen: Water resistance test conducted with and without a fiberglass mesh screen installed. <br />Additional Description : Unit bas one 70" long vinyl track insert, part No. 6513S, inside frame sill. <br />UoitIastallatioo: Test unit installed ina2x 12 pressurctrcatcd wood teat buck using112 x 4 pressure treated buck strip. <br />Frame installed with a single row 118" diameter by 1 ~" roof nail tbrollgh nail fin fi:amc at frame head, frame sill and <br />frame jambs. Location of installation nails are as follows: frame head and frame sill from the left, 1 7/16", 7 9/16", 13 <br />5/8". 193/4".25 13/16",31 7/8",38",44 1116", 50 liS", 563/16".625/16",683/8".749/16" and 75 15/16"; frame <br />jambs from the bottom, I 7/16",711/16",13 7/8", 20 1/16",26 114",327/16",38 11116",44 7/8", 51 1/16",571/4", <br />637/16" and 64 15/16" . <br />Product Markings: None <br /> <br />OFFICIAL TEST RESULTS <br /> <br />Paragrapll Number <br /> <br />Title of Test <br /> <br />Measured <br /> <br />2.1.2 <br /> <br />Air Infiltration Test: (ASTM E283-96) <br />at 6.24 psf 0.18 cfinlsq.ft. (3.29 cmhIt1l2) <br /> <br />Allowed <br /> <br />Passed <br />0.3 (5.49) maximum <br /> <br />Note: The tested specimen meets or exceeds the performance levels specified in specification reference <br />for air infiltration. <br /> <br />2.1.3 Water Resistance Test: (ASTM E54 7 -961E331 ) <br />with and without screen, DO leakage at 9.00 psf(430 Pal <br /> <br />2.1.4.2 Uniform Structural Load Test: (ASTM E330-96) <br />Positive Load - 90.0 psf(4309 Pal <br />Deflection Permanent Set <br />Readin~ at meetin,l!; rail 2.803" (71.28mm) 0.072" (1.83mm) <br />Reading at frame jamb 0.240" (6.IOmm) 0.005" (O.13mm) <br />Reading at frame sill 0.390" (9.92mm) 0.015n (0,38mm) <br /> <br />2.1.4.2 Uniform Structural Load Test: (ASTM E33o-96) <br />Negative Load 97.5 psf(4668 Pa) <br />Reading at meeting rail 3.280" (83.4Imm) 0.113" (2.87mm) <br />Reading at frame jamb 0.363" (9.23mm) 0.020" (0.51mm) <br />Reading at frame sill 0.485" (12.33mm) 0.026" (O.66mm) <br /> <br />Passed <br />4.50 (215) minimum <br /> <br />Passed <br />45.0 (2155) minimum <br /> <br />0.233 (5.92) maximum <br /> <br />Passed <br />45.0 (2155) minimum <br /> <br />.23~~.{ <br /> <br />1~/3-'.r <br />