Laserfiche WebLink
<br />PERFORMANCE PROPERTIES OF THE CURED ADHESIVE <br />SEALING PROPERTIES <br /> <br />PERMABOND LHOSO Pipe Sealant will provide maximum sealing capabilities after full cure, Typically, <br />this is up to the burst rating of the pipe or fitting, PERMABOND LHOSO Pipe Sealant, tested on a high <br />pressure hydraulic fitting results in failure of the fitting itself at 40,000 psi. <br /> <br />Instant sealing property is a function of the on-torque assembly, type of fitting, and grade of fitting, The <br />instant sealing properties of PERMABOND LHOSO Pipe Sealant is 1,000 psi when hand assembled, and <br />3,000 psi when a 10 in-Ib on-torque is applied. <br /> <br />Cured at 250C for 24 hours <br /> <br />Torque, ISO 10964 <br /> <br />Breakaway, Ib.in (N'm) <br /> <br />M10 steel nuts and bolts <br /> <br />35 (4) <br /> <br />Prevail, Ib'in (N'm) <br /> <br />M10 steel nuts and bolts <br /> <br />24 (3) <br /> <br />Compressive shear strength,ISO 10123 <br />(Steel pin and collars) <br /> <br />1000 psi <br />(7) N/mm2 <br /> <br />THERMAL PROPERTIES <br /> <br />PERMABOND LHOSO Pipe Sealant resists temperatures up to 1770C (3500F) for sealing. At operating <br />temperatures of up to 1500C (3000F), full locking strength is maintained. <br /> <br />CHEMICAL RESISTANCE <br /> <br />PERMABOND LHOSO Pipe Sealant was tested for resistance to fluids for 1,000 hours under the indicated <br />temperature conditions: <br /> <br />1,000 Hours Soak Temperature, oC (OF) Pressure, psi Results <br />Antifreeze, 50%/Water, 50% 126 (260) 60 No leak <br />Brake Fluid 150 (300) 60 No leak <br />Differential Lube 150 (300) 60 No leak <br />5W/30 Engine Oil 150(300) 60 No leak <br />Transmission Fluid 150 (300) 60 No leak <br />Diesel Fuel #2 25 (77) 60 No leak <br />ASTM Fuel C 25 (77) 60 . No leak <br />Water, Steam 198 (390) 540 No leak <br />Air 150(300) 60 No leak <br /> <br />Re[#: 110607PBLH050 <br /> <br />3 <br />