09-9545 - Laserfiche WebLink

Browse Search

uata meet 2Z:51 As Built ----- Engineered Systems IPF Series TM Output Control Module • DXP -OCM (WI s,1 % -� Description Features The IP Fire Series' control system provides for Analog Loop Modules (ALM's) that may be installed throughout a protected Form C dry relay contacts facility in any number up to the IPF system maximum of 50 • Automatically controls modules. IPF Series''' ALM modules offer analog addressable building functions signaling line (SLC) circuits that may each have up to 126 " Fully supervised detectors or 126 addressable control devices in any combination. • Field programmable The AsBuilt output control monitor (DXP -OCM) is an addressable • Plate mounted for device that is a means of connecting to and controlling building surface /flush mounting in 4" functions such as electromagnetic door holders, dampers, motors, square boxes elevators and disconnects from the main IPF Series ' ' system. " LED for polling /alarm annunciation The DXP -OCM connects to the SLC, is programmed via a 7 pin DIL switch addressing DIL switch and is polarity insensitive. • Single or multiple initiating points on the IPF Series'' fire control are assigned to specific DXP -OCM modules that may be connected anywhere on the SLC. When an event is generated by an initiating device, the pre - programmed assignment automatically fires the Form C dry contacts located on the DXP - OCM effecting a change in status to the attached building control device(s) In standby mode, the DXP -OCM monitors its internal circuitry for status of the device itself and supervises the external control circuit for faults. In the event a fault is detected, the DXP -OCM will report a trouble to the IPF Series' fire control. When tied to specific smoke detectors, switch monitors and other initiating devices, the DXP -OCM allows the IPF Series' fire Listin4s control to exercise significant automatic control over all building functions in accordance with local building requirements. UL File: 57003 The DXP -OCM is plate mounted on a 4 1 /4 x 4 ', < plastic plate for surface or flush mounting on 4" square boxes. The DXP -OCM is fully supervised, field programmable and has an integral LED that is visible through the front plate. The LED flashes on device poll to show that it is active. The red LED latches ON upon activation. Product Data Sheet Number Rev /Revision Date IPF Series TM Output Control Module 2818 © Copyright 2008 AsBuilt Engineered Systems, Inc, 1.2/ 1/1/2009 7 FIR SERIES'